INSTALLATION
ΙFix the adapter to the recess mount with M3 screws
through the spacers. Then, fix the camera to the adapter
with M4 screws as picture shows.
ΚFix the dome cover to the base.
ΛPut the template into the hole of ceiling.
ΜConnect eyebolt to the recess mount housing. Fix the wire
rope to inside ceiling.
ΝPlease adjust length of wire rope using Tumbuckle.
Ξ
As picture shows, insert recess mount housing into the ceiling.
Fix it to the template using M3x70 screws.
ΟFit the part of decoration ring into each right hole of housing
and press the ring lightly.
ΗPut the template on the right part of ceiling for installation
and make a hole
ΘPlease draw outside service wire from the hole of ceiling.
Ceiling
Template for cutting the ceiling
Outside service wire
NN
Turnbuckle
Recess mount
Dome cover
Screw M3x70
Template
OPEN CLOSE
Ceiling
ⲻ5IFBDUVBMQSPEVDUNBZEJGGFSGSPNUIFQJDUVSFCVUUIFSFJTOPQSPCMFNJOVTJOH
