Ikelite 2602.5 GoPro User manual

2602.5 GoPro Mount Kit for
DSLR Housing
Instru tion Manual
This mount kit in ludes a 1-in h ball at DSLR top mount, lightweight
a essory lamp and GoPort tripod mount to atta h your GoPro to an
Ikelite DSLR top mount. GoPro amera not
in luded and not available through Ikelite.
Refer to Diagrams A and B on the opposite
side of this page for installation pro edure.
Note: Standard sized 1-in h diameter ball
omponents are also inter hangeable with
the rest of the Ikelite 1-in h ball arm system
omponents, as well as arms from Ultralight,
Aquati a, Nauti am, and others.
Included in Kit
I elite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
www.i elite.com

IKELITE
IKELITE
2602.5_GoPro_Mount_Kit_for_DSLR_Housing_1-0215
© 2015 Ikelite Underwater Systems
Installation Procedure
1. Che k tightness of GoPro Mount on Ball Mount. Atta h and
tighten Mount Kit se urely to DSLR Housing as shown using a
flathead s rewdriver (not in luded), Diagram A.
2. On e mounted to the DSLR housing mount, loosen the Wingnut
slightly and rotate the GoPro Mount so it is verti al with the DSLR
Housing, Diagram B. Do not a identally loosen GoPro Mount on
Ball Mount during positioning of the Mount Kit.
Wingnut
Diagram B
Mount Kit properly attached to
I elite DSLR Housing.
Diagram A
Ball
Mount
GoPro
Mount