iLive IAQST303 User manual
Deskmate 5-in-1 Headphone
Stand & Wireless charger
User’s Guide for Model IAQST303 v2977-01
Wireless Earbud Power PadPhone Power Pad
QC 3.0 USB
power adapter
Indicator Light
Charging = Slow Flashing Green
Standby mode= Solid green
Features
• Wireless standard inductive charging
• Compatible with wireless Fast Charge devices
• Over current, over voltage, high temperature
and short circuit protection
• Input voltage/current: 5V 3A / 9V 2A / 12V 1.5A
• Wireless charging Output power: 15W - 10W -
7.5W - 5W
• Type-C and USB output power: 5V 2A (Max)
Fast Charging
Note : Use only included charging equipment.
Unauthorized chargers may cause damage or the
wireless charger may malfunction.
Fast charging is only compatible with supported
devices and the included USB Power Cable.
On supported devices, if the “fast/rapid charging”
feature is not selected, you may need to enable it from
your device’s Settings, Power, or Battery menu. Consult
the user’s manual for your specic device for more
information.
Place wireless charging enabled device on the Phone
Power Pad to begin charging. Place earbud case on to
the Wireless Earbud Power Pad. Plug your wireless
headphones into one of the DC power outputs on the
back of the unit
Connecting Power Supply
Using the Charging Station
To power the unit, plug the USB-C fast charging cable
(included) into the DC Power Input on the back of the charging
stand and the other end into the provided QC 3.0 USB power
adapter (included) and standard power outlet.
Includes
• Fast Charge USB-C power cable
• QC 3.0 power adapter
• User manual
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal
product guidelines.
Notes On Wireless Charging
Do not block the cooling vents on the rear of the pad.
There is a risk of overheating which may cause injury
or damage.
Do not leave the charger and your mobile device
unattended while charging.
Depending on the location of the charging coil on
your mobile device, your device may not charge in all
positions. Find the position that works best for your
device.
If you are using your device with a connected headset,
place the device in the landscape position. Placing
your device in the portrait position may move its
charging coil out of position to charge.
Wireless charging may not work if you have a case that
is A) too thick or B) has a magnet. In order to charge,
you will need to remove the case before placing on the
charging pad.
If you are using an attached wireless charging case on
your mobile device, never place just the case on the
charging pad. This may overheat the charging pad
and/or the case, and has a risk of re and injury.
If you connect a wired or portable battery charger to
your device while it is on the charging pad, the pad will
disable wireless charging.
The wireless charger does not have a power switch.
To save energy, unplug the wireless charger from its
power source.
The wireless charger may cause interference in areas
with weak Wi-Fi signal.
Before using, be sure to remove the protective lm
that covers the charger base where your phone rests.
Made
Green
Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2023 Digital Products
International (DPI, Inc.) All other trademarks
appearing herein are the property of their
respective owners. Specications are subject
to change without notice.
Safety Warnings.
• WARNING: To prevent re or shock hazards, do not expose this
unit to rain or moisture.
• WARNING : Where the mains plug or appliance coupler is used
as the disconnect device, such disconnect device shall remain
readily operable.
• Do not place foreign materials, such as metal objects, magnets, or
the like, between a mobile device and the charging surface. This
may interrupt charging and may cause damage from overheating.
• Only use with the included power supply.
