In Stock Kitchens BRIGHT WHITE SHAKER BASE CABINET User manual

800.935.8508
Lay the face frame at with the
grooves facing upward
Screw the metal clips into
the predrilled holes noting that
all but the base bracket face
inward.
Run a glue line along the
groove in the face frame
Slide the side panel into the
groove locking the metal clips
into place
BRIGHT WHITE SHAKER BASE CABINET
ASSEMBLY INSTRUCTIONS
Align Clips qand w
Slide qinto w
Insert locking screw
into clip pair
Tighten all screws
EASY ASSEMBLY
METAL CLIP SYSTEM

800.935.8508
Attach the metal L brackets to
the back panel of the cabinet in
the predrilled holes.
Lay the back panel onto the
side panels with the metal
brackets facing inward. Be
sure to slide the lip on the back
panel into the groove on the
side panels.
Secure the body of the cabinet
with a clamp.
Attach the wooden corner
supports using the screws
provided.
Insert the male bracket into
the female bracket.
Slide the bottom panel into the
grooves of the side panels and
screw into place
BRIGHT WHITE SHAKER BASE CABINET
ASSEMBLY INSTRUCTIONS

800.935.8508
Lay the metal glides into
place on the metal L brackets
at the back of the cabinet.
Secure the metal glides to
the cabinet body.
Remove the drawer from the
packaging.
Attach the glides to the metal
hinges.
Ensure the drawer opens and
closes.
Center the face plate over the
opening of the drawer.
Attach the face plate to the
drawer front.
Insert the hinges onto the
door face and secure.
Attach the door face to the
cabinet body.
Add the soft close attachment
to the hinge.
BRIGHT WHITE SHAKER BASE CABINET
ASSEMBLY INSTRUCTIONS