In studio 2.1 Multimedia Speaker System User manual
INSTRUCTION MANUAL
8019447
2.1 Multimedia
Speaker System
Read all of the instructions before using this unit and keep the
manual in a safe place for future reference.
1
Before using the product, be sure to read all operating instructions carefully. Please note that these are general percautions and may not
pertain to your particular product. For example, this product may not have the capability to be connected to an outdoor antenna.
1. READ INSTRUCTIONS-
All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS-
The safety and operating instructions should be retained for future references.
3. HEED WARNINGS-
All warnings on the product and in the operating instructions should be adhered to
4. FOLLOW INSTRUCTIONS-
All operating and user instructions should be followed.
5. DO NOT USE THIS PRODUCT NEAR WATER-
Do not use this product near water (a bathtub, washbowl, kitchen sink, laundry tub, wet basement, or swimming pool for example).
6. CLEANING-
Unplug this product from the wall outlet before cleaning. DO NOT use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
7. ATTACHMENTS-
DO NOT use attachments not recommended by the product manufacturer.
8. ACCESSORIES-
Do not place this product on an unsatable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury and serious damage to the product.
8A.Useonlywiththecart,stand,tripod,bracket,ortablespeciedbythemanufacturer,orsoldwiththeproduct.
When a cart is used, use caution when moving the cart and product to avoid injury from tip-over.
9. VENTILATION -
DO NOT block any ventilation openings. Install in accordance with manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves or other product (including
ampliers)thatproduceheat.
10. POWER SOURCES-
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of
power supply to your home, consult your appliance dealer or local power company. For products intended for operation from battery
power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION -
This product may be equipped with a polarized alternating current line plug (a plug having one blade wider then the other). This plug will
tthepoweroutletonlyoneway.Thisisasafetyfeature.Ifyouareunabletoinserttheplugfullyintotheoutlet,tryreversingtheplug.If
theplugshouldstillfailtot,contactyourelectriciantoreplaceyourobsoleteoutlet.DONOTdefeatthesafetypurposeofthepolarized
plug.
12. POWER CORD PROTECTION -
Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords at plugs, convenience receptacles, and the POINT WHERE THEY EXIT FROM THE PRODUCT.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADE SCAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safety Instructions
This equipment is double insulated and an earth connection is not required.
2
Important Safety Instructions
13. OVERLOADING -
Donotoverloadwalloutletsandextensioncordsasthiscanresultinariskofreorelectricshock.
14. OBJECT AND LIQUID ENTRY (cUL Standards)-
Thisproductshouldnotbeexposedtodrippingorsplashingandobjectslledwithliquid,sushasvases,shouldnotbeplacedonthis
product.
15. SERVICING -
Referallservicingtoqualiedservicepersonnel.Servicingisrequiredwhentheproducthasbeendamagedinanyway,suchasthe
power-supply cord or plug being damaged, liquid spillage, or objects falling on or into the product, or if it has been exposed to rain or
moisture or it has been dropped - anything that causes the apparatus to not operate normally.
16. REPLACEMENT PARTS -
Whenreplacementpartsarerequired,besuretheservicetechnicianhasusedreplacementpartsspeciedbythemanufacturerorhave
the same characteristics as the original part.
UNAUTHORIZEDsubstitutionmayresultinre,electricshockorotherhazards.
17. SAFETY CHECK -
Upon completion of any service or repair to this product, ask the service technician to perform safety checks to determine that the product
is in proper operating condition.
18. MOUNTING -
DO NOT place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold
with the product. Any manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
19. DAMAGES REQUIRING SERVICE -
Unplugthisproductfromthewalloutletandreferservicingtoqualiedservicepersonnelunderthefollowingconditions:
(a). When the power-supply cord or plug is damaged.
(b). If liquid has been spilled, or objects have fallen onto the product.
(c). If the product has been exposed to rain or water.
(d). If the product does not operate normally after following the
operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of
othercontrolsmayresultindamageandwilloftenrequireextensiveworkbyaqualiedtechniciantorestoretheproducttoits
normal operation.
(e). If the product has been dropped or damaged in any way.
(f). When the product exhibits a distinct change performance - this indicates a need for service.
20. HEAT -
Theproductshouldbesituatedawayfromheatsourcesuchasradiators,heatregisters,stovesorotherproducts(includingampliers)
that produce heat.
3
Table of Contents
Important Safety Instructions .......................................1
Table of Contents .................................................3
Box Contents ....................................................4
Identifying The Parts ..............................................4
Connectivity .....................................................5
Specications ...................................................5
Troubleshooting .................................................5
The FCC Wants You To Know .......................................6
Warranty ........................................................6
4
Box Contents:
●1×Subwoofer
●2×Satellitespeaker
(withconnectingcable)
●1×Wiredcontroller
(withaudiocable)
●1×Usermanual
Identifying The Parts:
1.Powerswitch
2.Linein
3.Outputforsatellites
4.Powercable
5.Headphonejack
6.Muteswitch
7.LEDindicator
ON:playmode
OFF:mutemode
8.Volumecontrolknob
NOTE:
a.Audioonlycomesthroughtheheadphoneswhenitis
connectedtotheheadphonejackonthewiredcontroller.
b.Thewiredvolumecontrollerwillnotaffectthe
headphone’svolume.
5
Connectivity
1. Connecting the speakers
Connectthesatellitetothespeakeroutputportonthebackpanelofthesubwoofer,usingthe3.5mm
connectorcableattachedtothesatellites.
2. Connect to audio source
Connectaudiosources(likeaPCcard,MP3/MP4playerorCDplayer)tothewiredcontroller,usingthe
3.5mmconnectorcableattachedtothewiredcontroller.
3. Play the music
Connectthespeakertooutletandswitchonthesystem,playthemusicandadjustmastervolumetoa
comfortablelevel.
Specications:
Poweroutput: RMS2x1.8W+4W
Signaltonoiseratio: ≥85dBA
Distortion: ≤0.5%
Inputsensitivity: R/L:350mV±50mVSW:250mV±50mV
Frequencyresponse: R/L:180Hz~20kHzSW:20Hz~180Hz
Bassunit: 4”(106mm)
Tweeterunit: 50mm×90mm
Dimension: Subwoofer:158x225x252mm(WxHxD)
Satellite: 64x140x112mm(WxHxD)
PowerSupply: 120V~60Hz
Troubleshooting
●Makesurepowerisconnected,andthewalloutletisswitchedon.
●Turnthesystemoff,thenonagainandreconnecttotheaudiosource.
●Makesurethemastervolumeisnotturnedtotheminimumlevel.
●Makesuretheaudioinputcableisconnectedcorrectly.
●Checkifthereissignalfromtheaudiosource.
●Keepa0.2-1mdistancebetweenthespeakersystemandmonitororTVsettoavoidmagneticinterference.
6
Please Recycle
Table of contents
Other In studio Stereo System manuals
