In Style Furnishings Lunar Platform User manual

Lunar Platform (Full Bed Frame)
assembly instructions
PARTS INCLUDED
PAGE 1 OF 2
PARTS INCLUDED
ALLEN HEAD SCREW
20 pcs- ¼”
x¾”
ALLEN HEAD SCREW
4 pcs- ¼”
x1 ¼”
FLAT WASHER
24 pcs- ¼”
SPRING WASHER
(20 pcs) - ¼”
HEX NUT
(4 pcs) - ¼”
ADJUSTABLE SUPPORT
LEG (2 pcs)
PLASTIC CAP (ONE END)
22 pcs)
WOOD SLATE
11 pcs
OPEN WRENCH
(1 pc) - ¼”
ALLEN WRENCH
1 pc  ¼”
LEG
4 pcs
SIDE RAIL
2 pcs
SHORT RAIL
2 pcs
MIDDLE RAIL
1 pc
A B C D E
F G H I J

Lunar Platform (Full Bed Frame)
assembly instructions
BED FRAME ASSEMBLY
PAGE 2 OF 2
STEP 1
Assemble each leg with 2 Allen head screws (3/4”) A , 2 spring washers Dand 2 flat washers C . Do not tighten screws.
STEP 2
Assemble short rail to side rail with 2 Allen head screws (3/4”) A , 2 spring washers D and 2 flat washers Cfor each end.
Do not tighten screws.
STEP 3
Turn the bed frame upright. Attach the middle rail to the short rail and insert 2 Allen head screws (3/4”) A , 2 spring
washers D and 2 flat washers C at each end. Do not tighten screws.
STEP 4
Assemble each support leg with F2 Allen head screws (1-1/4”) B , 2 flat washers C , and 2 hex nuts Eat the allotted
spots. Tighten hex nuts and screws with provided Open wrench I and Allen wrench J .
STEP 5
Assemble plastic caps Gand wood slates H. Insert plastic caps Ginto holes on rail and push in.
STEP 6
Tighten the screws from Step 1 to 4 using the proper Allen wrenchs.
NOTE: MAKE SURE THAT ALL SCREWS ARE TIGHTEN.
ADJUST THE ADJUSTABLE SUPPORT LEG (PART F) BEFORE USING THE BED.
E
B
C
F
C
D
A
STEP 1
STEP 5
G
H
STEP 4
STEP 3
STEP 2
C
C
D
D
A
A