In Style Furnishings Lunar Platform User manual

Lunar Platform (Queen/King Bed Frame)
assembly instructions
PARTS INCLUDED
PAGE 1 OF 2
PARTS INCLUDED
ALLEN HEAD SCREW
16 pcs- ¼”x⅝”
ALLEN HEAD SCREW
2 pcs- ¼”x1½”
FLAT WASHER
18 pcs- ¼”
SPRING WASHER
(16 pcs) - ¼”
ADJUSTABLE SUPPORT
LEG - (2 pcs)
ALLEN WRENCH
1 pc  ¼”
PLASTIC CAP (ONE END)
24 pc
WOOD SLATE
12 pc
LEG
4 pcs
SIDE RAIL
2 pcs
SHORT RAIL
2 pcs
MIDDLE RAIL
1 pc
A B C D
E F G H

Lunar Platform (Queen/King Bed Frame)
assembly instructions
BED FRAME ASSEMBLY
PAGE 2 OF 2
STEP 1
Assemble each leg with 2 Allen head screws (5/8”) A , 2 spring washers D and 2 flat washers C. Do not tighten screws.
STEP 2
Turn the bed frame upright. Insert the middle rail into the pin on the short rail and snap into place. Assemble short rail to side
rail with 2 Allen head screws (5/8”) A , 2 spring washers D and 2 flat washers C for each end. Do not tighten screws.
STEP 3
Assemble each adjustable support leg E with 1 Allen head screw (1-1/2”) B and 1 flat washer C .
STEP 4
Tighten the screws from Step 1 to 3 using the Allen wrench F .
STEP 5
Assemble plastic caps G and wood slates H. Insert plastic caps Ginto holes on rail and push in.
STEP 5 G
H
STEP 3
B
C
E
C
D
A
STEP 1
STEP 2
C
D
A