Inalsa Gemini 1000 User manual

Dear Customer,
Congratulations! On the purchase of your INALSA Electric iron, this is
designed to include many superior features that permit you the fullest
expression of your ironing skill and enthusiasm. You are now on the
threshold of a whole new world of ironing pleasure.
At INALSA, we have a reputation of manufacturing innovative, high quality
appliances such as Food Processors, Mixer Grinders, Juicer Mixer Grinders,
Cooking Ranges, Juice Extractors, Cooktops, Microwave Ovens, Oven
Toaster Grillers, Hand Blenders, Electric Kettles, Rice Cookers, and Electric
Chimneys. Your newly acquired INALSA Electric iron bears the same
distinctive hallmark of excellence.
It is all the result of vigorous quality consciousness in INALSA's design and
development where uncompromising standards are maintained and rigid
quality control measures are exercised on raw materials, components and
finally, the finished product.
Your INALSA Electric iron has a lot of thoughtful features built in to make
your ironing convenient. Please read these instructions carefully, so that you
may get the best out of the power packed features in your INALSA Electric
iron.
Welcome to the INALSA world of ironing pleasure!!
HOME APPLIANCES
The visuals are indicative only
DRY IRON
MªkbZ vk;ju
USE & CARE MANUAL

Part's Identifications
Part No. Part Name
Technical Specification*
1. Cord plug 6.
2. 7. Sole Plate
3. 8. Body cum handle
4. 9.
Cotton braided
PTFE coated, black
Part No. Part Name
Metal cover
Cord holder
Light indicator -Power
Light indicator - Thermostat Handle cover
5. Thermostat knob
1. Please read operating instructions before using the appliance.
2.
Do's
1 The fabrics which are more sensitive to heat should be ironed at low
temperature setting.
2. Always use correct temperature setting for different types of fabric as
indicated on the thermostat knob.
3. Before starting ironing let the sole plate to heat sufficiently.
4. Keep the iron on its back rest during idle periods.
5. Always keep the iron moving during ironing operation.
6. Before storing let the iron cool down sufficiently (standing on its back rest).
7. Wind the cord around the handle, when it is completely cooled down.
8. After each use clean with a damp cloth when the iron is still warm. For
stubborn marks, clean with vinegar.
9. Keep the iron away from the children.
10. Always unplug the iron before leaving.
11. In case of any defect, contact the nearest authorized dealer/ service centre.
Don'ts
1. Do not leave the iron unattended during use.
2. Do not place the sole plate on a rough or abrasive surface.
3. Do not use the iron on metallic fittings to avoid scratches.
4. Never immerse the iron in water.
5. Cord should not touch the sole plate when it is hot.
6. Do not touch the sole plate when it is hot.
1. After unpacking the unit and before any use, make sure the mechanical
parts of the iron and all its attachments are not damaged.
2. Carefully go through the instruction manual before starting the ironing
operation.
Model Gemini 1000
Voltage 230V, 50Hz AC
Wattage 1000W
Cord Plug with 3 Pin, 6A 250V moulded plug
Sole plate coating
*Due to continuous improvements in product, specifications are subject to
change without prior notice.
Important Instructions
Some parts of the electric iron have been slightly greased and as a
result, the electric iron might slightly smoke when used for the first
time. After the short while however this will cease.
Before First Use
How to Use
Practical Advice
Ironing temperature selection
1. Make sure that the supply voltage is in compliance with the rated one.
2. Set the thermostat knob at the desired setting. Plug in the iron. The neon
indicator will glow ON which means that the sole plate is heating up.
Once the desired temperature is reached, the indicator light will go OFF.
Now start ironing your fabric. The indicator light will switch ON / OFF from
time to time in order to regulate the temperature of the sole plate.
3. If the cloth consist of various kinds of fibers, you must select the lowest
ironing temperature of the composition e.g. an article consisting of 40%
of cotton and 60% of polyester, should be ironed at a temperature setting
marked as polyester on the thermostat knob.
4. Velvet and other textiles, which rapidly acquire shiny spots, should be
ironed in one direction only, and by light pressure.
5. Sort out clothes; taking into account the nature of the fabric and first start
ironing those clothes which are more sensitive to heat (require a cooler
temperature setting).
6. Always keep the iron moving.
7. After the ironing operation is over, unplug the iron and let it be cooled
down. Wind the cord around the handle and store in a dry place.
1. Sprinkle some water over the fabric during ironing to remove the
stubborn wrinkles.
2. Never select higher temperature for the article to be ironed otherwise you
run the risk of scorching the fabric and damaging the sole plate of your
iron.
One must select the appropriate ironing temperature for different types of
fabrics. To select the temperature rotate the thermostat knob in such a
manner so that the type of fabric marked on the knob is in line with the
pointer.
Knob Nylon Rayon Silk Wool Cotton LinenPosition
min
min
min
min
min
min
2
9
3
4
5
6
7
8
1