Inalto Classique IFLW60 User manual

USER MANUAL
V 1.1
MODELS
IFLW60/75
6/7.5KG FRONT LOAD
WASHING MACHINE

User Manual 02
Congratulations on purchasing your washing machine. The InAlto brand is
proudly distributed within Australia by esidentia Group Pty Ltd.
Please refer to the warranty card at the rear of this manual for information
regarding your product’s parts and labour warranty, or visit us online at
www.residentia.group
At esidentia Group, we are customer obsessed and our Support Team are
there to ensure you get the most out of your appliance. Should you want
to learn more about the various features of your new appliance, and
importantly taking care of your appliance when cleaning, our Support Team
are here to help. You can use our online Support Centre at any time by
visiting http://support.residentiagroup.com.au, or you can contact us
via calling us on 1300 11 HELP (4357).
It is important that you read through the following use and care manual
thoroughly to familiarise yourself with the installation and operation
requirements of your appliance to ensure optimum performance.
Again, thank you for choosing an InAlto appliance and we look forward to
being of service to you.
Kind Regards,
The esidentia Team
Residentia Group
—
Head Office.
165 Barkly Avenue
Burnley, Victoria
Australia 3121
—
ACN.
600 546 656
—
Online.
residentia.group
Welcome

inalto.com.au03
04
Safety
Instructions
07
Your InAlto
Washing
Machine
Contents
08
Quick
Start Guide
09
Operating
Instructions
12
Cleaning &
Maintenance
14
Troubleshooting
15
Technical
Specications
16
Receipt
17
Purchase Details
18
Warranty
Information

User Manual 04
Safety Instructions
CONDITIONS OF USE
• This appliance is intended to be used in household and
similar applications such as farm houses or by clients
in serviced apartments, holiday apartments and other
residential type environments.
SAFETY INSTRUCTIONS
• Before the installation and use of the appliance,
carefully read the supplied instructions.
• The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages.
• Always keep the instructions with your appliance for
future reference.
WARNING: To prevent any damages to your and others’
life or property, you have to follow the safety notes.
WARNING: Caution, risk of re!
CHILDREN & VULNERABLE PEOPLE SAFETY
WARNING: Risk of suocation, injury or permanent
disability.
• This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction for the operation of the appliance by a
person who is responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door
when it is open.
• Cleaning and user maintenance shall not be made by
children without supervision.
INSTALLATION
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the
appliance.
• Make sure that the oor where you install the appliance
is at, stable, heat resistant and clean.
• Always remove the plug and turn o the water supply to
the appliance after every use.
• Sharp and rigid items such as coins, nails and screws
may cause serious damage to this appliance- always
ensure pockets of clothing are empty.
• Always ensure that the drum has drained all water
before opening the appliance door. If water is visible, do
not open the appliance door.
• Do not install the appliance behind a lockable door, a
sliding door or a door with a hinge on the opposite side,
where the appliance door cannot be fully opened.
• Always be careful when you move the appliance
because it is heavy. Always wear safety gloves.
• Always move the appliance vertically.
• The rear surface of the appliance must be put against
the wall.
• This appliance should not be installed in a bathroom or
similar wet rooms, as well as rooms with explosive or
caustic gases.
• Washing machines with a single water inlet and should
only be connected to the cold water supply outlet.
Models featuring two inlet valves can be connected to
both the hot and cold water outlets.
• The appliance can be installed as freestanding or below
the kitchen counter with correct space.
• When the appliance is put in its permanent position,
check if it is fully level with the aid of a spirit level. If it is
not, adjust the feet until it is.

inalto.com.au05
ELECTRICAL CONNECTION
WARNING: Caution, risk of re and electrical shock!
• The appliance must be earthed.
• Make sure that the electrical information on the rating
plate agrees with the power supply. If not, contact an
electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and
to the mains cable. Should the appliance power supply
cable need to be replaced, this must be carried out by
our Service Centre.
• Connect the mains plug to the mains socket only at the
end of the installation. Make sure that there is access to
the mains plug after the installation. Do not connect the
appliance plug with a power connection board.
• Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
• Do not touch the mains cable or the mains plug with
wet hands.
• This appliance complies with the E.E.C. Directives.
CARE & CLEANING
WARNING: Risk of injury or damage to the appliance.
• Before maintenance, deactivate the appliance and
disconnect the mains plug.
• Do not use water spray and steam to clean the
appliance.
• Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
PRODUCT DISPOSAL
• Disconnect the appliance from the mains supply.
• Cut o the mains cable and discard it.
• Remove the door catch to prevent children and pets to
get closed in the appliance.
APPLIANCE USE
WARNING: Risk of re, explosion, electric shock or
damage to the appliance.
•
• Use this appliance in a household only.
• Before operating this appliance, ensure that all
packaging and transport bolts have been removed.
Otherwise, serious damage can occur to the appliance.
• Before washing any clothes for the rst time, the
washing machine should be operated for one whole
cycle without any clothes inside.
• Do not climb up or sit on top of the appliance.
• Do not change the specication of this appliance.
• If you use fabric softener or similar products, obey the
instructions on the packaging.
• Do not sit or stand on the open door.
• Obey the maximum load volume of 7.5 kg
(refer to the “Programme chart” chapter).
• Ensure all objects are removed from clothing pockets
such as lighters and matches.
• Please only use front load washing machine detergents.
Flammable and explosive or toxic solvents are forbidden
for use with this appliance. Gasoline and alcohol should
not be used as a detergent.
• Never wash carpets or rugs within the appliance.
• Be careful to avoid burns when the machine drains hot
washing water.
• After a wash program completes, please wait two
minutes before opening the door.
• If a tumble dryer is installed on top of the washing
machine, use the suitable stacking kit. The stacking kit,
available from your authorized vendor, can be used only
with the appliance specied in the instructions, supplied
with the accessory. Read it carefully before installation
(Refer to the Installation leaet).
• Never lean against the machine door.
• Please do not close the machine door with excessive
force and if you nd it dicult to close the door, ensure
that the clothing load isn’t excessive.
TRANSPORT
• Always move the appliance cautiously. Do not use the
machine door or the handle of the detergent dispenser,
to lift the appliance.
• Transportation bolts should be reinstalled within the
machine by a specialised person, prior to transporting
the appliance.
• Ensure that all accumulated water is drained from the
appliance before moving.

User Manual 06
Safety Instructions (Continued)
INSTALLATION POSITIONING
• Ensure that your appliance is installed on solid and at ground, in a level
position.
• Please do not place the appliance on a slope, soft carpet or wooden oor.
• Your appliance should only be installed within an internal environment.
Do not install the appliance outdoors.
REMOVING THE TRANSPORTATION BOLTS
Before using this washing machine, transport bolts must be removed from the
backside of this machine. Please take the following steps to remove the bolts:
• Loosen all bolts with a spanner and then remove them.
• Use the plugs (supplied) to plug the holes.
• Keep the transport bolts for future use.
LEVEL ADJUSTING
• If the oor is obviously uneven, your appliance feet need to be adjusted.
If your appliance isn’t level, it will cause your appliance to vibrate, and
potentially move from its position.
• Once you’ve positioned your washing machine, press down from the top in
all four corners to ensure that it’s completely stable (i.e. not rocking in any
direction). Also use a spirit level to ensure that it is completely level in all
directions.
• Should you need to make adjustments, use a spanner to turn the appliance
legs until it makes contact with the oor. Turn the leg using one hand and
then fasten the nut up against the appliance cabinet, to lock the leg
in place.
• After making any adjustments to the appliance legs,
re-check to ensure it is level and no rocking occurring.
CONNECT THE INLET PIPE
• Connect the hose elbow to the cold water outlet, screwing in a clockwise
direction.
• Connect the other end of the inlet hose to the water inlet valve on the rear of
the washing machine.
• After installation, if there are any leaks detected, remove the hose and re-
install using the steps above. The hose is designed to be used on a standard
washing machine cock outlet.
POSITION THE OUTLET HOSE
• The outlet hose (used to drain the discharged water) is to be ideally
connected to the relevant waste pipe, although it can also be positioned
to drain into a sink/trough. Note that the outlet hose has a minimum outlet
position of 60cm and a maximum position of 100cm
(as illustrated below).
Note: If you are positioning the outlet hose to drain into a sink or trough,
please ensure that it is xed in place and that the sink remains unblocked at
all times.

inalto.com.au07
THE APPLIANCE
Your InAlto Washing Machine
Detergent Drawer Control Panel
Power Plug
Outlet Hose
Door
O Start / Pause
Program Selection Additional Options
CONTROL PANEL
DETERGENT DRAWER
The detergent drawer of your washing machine is split into three compartments:
I Pre-detergent compartment.
Refer to the Wash Programmes Table to see which programmes utilise a pre-wash.
II Main detergent compartment.
This is the common detergent drawer.
Washing additive compartment.
Use for fabric softeners, etc.
Product is switched o Press the button to start
or pause the wash cycle
Press the button to start
or pause the wash cycle
This allows you to select
additional wash functions and
will light up when selected.
40˚C
60˚C
90˚C30˚C
60˚C
Delicate
Daily Wash Cotton Eco
40˚C
30˚C
20˚C
9 Hours
6 Hours
3 Hours
Cotton
40˚C
60˚C
Child Lock
40˚C
Synthetic
Spin Only
Press 3 sec.
Prewash Extra
Rinse
No
Spin Pause
Start
OFF
Drum Clean
Drain Only
Rinse & Spin
15’
45’
30’

User Manual 08
Quick Start Guide
QUICK START:
Follow the procedure below to operate your washing machine.
1. Install your washing machine.
2. Open the door and load the laundry
3. Measure the detergent and pour in the appropriate amount.
4. Close the machine door.
5. Put down (or hang up) the drain pipe
6. Turn on the water supply.
7. Plug in the power supply.
8. Select the desired program.
9. Press the Start/Pause button to begin.
10. Completion of the washing cycle.
• At the completion of a wash program, the washing machine will make an audible tone.
11. Turn o the water supply
• Although the washing machine would be switched o, the power
outlet should be switched o and the plug should be pulled out for safety reasons.

inalto.com.au09
Operating Instructions
PREPARATION BEFORE WASHING CLOTHES
Please follow these steps carefully to avoid trouble with your washing machine and damaging your clothing.
Washing Considerations
• New clothes in particular, can leach colour onto other
clothing items, particularly whites.
Consider washing these and bright colours separately.
• Stained clothing should be treated with a stain remover,
prior to washing.
• Temperature sensitive clothes should be washed in
accordance with their care direction label. Otherwise
distortion and/or changes in colour could occur.
• Never allow washing to sit in the machine for a long
period of time- particularly when wet. Clothes can
become mouldy and develop an odour.
• Certain clothing cannot be washed in a washing
machine and their care directions may state dry
cleaning or hand washing required.
• Wrinkle style clothes, embossed clothes, resin clothes,
etc may become distorted when immersed in water.
• Avoid washing clothes without care direction labels
within the appliance, to be safe.
• Always remove all items from clothing pockets, as hard
items can cause damage to the appliance.
• Try to wash clothing colours and sizes in like loads,
as this will improve the eectiveness of the washing
and results.
• Close all clothing zips and ensure all buttons are
fastened securely.
• Delicate items such as bras, handkerchiefs and ties
should be washed within a special washing bag, to
prevent damage to themselves and other clothes.
• When washing a large single item that could become
heavy (i.e. a towel or jacket), it can cause the appliance
to become unbalance during its spin cycle. Therefore it’s
recommended to add one or two more clothing items to
help the machine balance.
• Try to remove any pet hair, dust and stains from
clothing prior to washing.
• Baby clothing should be washed separately.
• Clothing that gets easily “fuzzed” or loses bres easily,
should be washed separately.
• Black clothing items should be washed separately.
• Do not wash waterproof materials within the
washing machine.
Pay Attention to Detergents
• Only use suitable front load washing machine
detergents with this appliance. Powders and liquid
detergents only.
• Only ever use the recommended quantity of detergent,
as per the manufacturer’s guidelines, as an excessive
quantity can cause excessive bubbles and overow to
occur.
• It can also result in detergent residue remaining on the
clothing after completion of the wash cycle.
WARNING: Always keep detergents and additives out
of reach from children.
Clothing Classications
The symbol types on care labels are typically classied
into the following textiles: Cotton, Blended Fibre, Synthetic
Fibre, Silk, Wool and Articial Fibre.
Conrm the Washing Capacity
Never load the machine with excessive weights, as it will
aect your washing results.
Fiber type Maximum Load Capacity
Cotton 6.0kg
Synthetics 3.0kg
Wool 2.0kg
Delicates 2.5kg

User Manual 010
WASHING CLOTHES FOR THE FIRST TIME
Before washing any clothes, please perform one cycle
without clothes inside as follows:
• Connect the power source and water.
• Insert a small amount of detergent into Compartment II
of the detergent drawer and close it.
• Select the desired program.
• Press the “Start/Pause” button on the appliance.
• Allow the program to complete and your washing
machine is now ready for use.
SELECTING A PROCEDURE
You should select you washing program based on the type
of clothing, quantity and dirtiness level, in combination with
the following temperature table.
Temperature Mode Application
90ºC Seriously soiled clothing, pure white cotton
(I.e. bed linen, towels, table cloths, etc)
60ºC
Moderately soiled clothing, cotton and
synthetic articles with certain decolourising
degree (I.e. shirts, pyjamas, etc)
40ºC, 30ºC,
20ºC, Cold Water Lightly soiled clothing, synthetics and wool
To select a program:
• First turn the Program Selection Dial to the
corresponding wash program, according to the type
of textiles being washed.
• Secondly, select the desired temperature based on
the level of dirtiness.
Note: Generally the higher the temperature, the more
power that’s consumed.
• Finally, select your desired spin speed. The higher the
spin speed, the drier the textiles will be at completion,
however more delicate textiles will be more wrinkled.
Delicate textiles should be set with a lower spin speed.
Selecting the main washing program depend on the types
of clothing to be washed, as follows:
Daily Wash
This procedure is suitable for washing a small quantity of
clothes without heavy soiling.
Delay
You can select this procedure wash the tough clothes, that
need much more time and strength. It is recommended for
washing durable cotton articles, for example: bed sheets, quilt
covers, pillowcases, gowns, underwear, etc. The total time
including washing time and delaying time is 3, 6 or 9 hours.
Delicate
You can select this procedure to wash your delicate clothes.
Its washing intensity is gentler and spin speed is low
compared with the “Synthetic” procedure. It is recommended
for washing any articles requiring a soft wash.
Cotton Eco
This procedure saves energy and limits the washing
temperature to 40°C or 60°C. Use with a small quantity of
clothes which are only lightly dirty.
Cotton
To increase the washing results, the main washing time
is increased. It is recommended for washing clothes for
babies or worn by the persons with skin allergies. It is
recommended for washing durable cotton articles, for
example: bed sheets, quilt covers, pillowcases, gowns,
underwear, etc.
Synthetic
The procedure is shorter compared with that for cottons and
the washing intensity is relatively gentle. It is recommended
for washing synthetic articles, for example: shirts, coats, etc.
Rinse & Spin
This procedure provides a short rinse cycle followed by a
spin cycle.
Drain Only
This procedure provides a drain only option.
Spin Only
This procedure provides a spin only option. Residual soapy
water shall be drained out before spinning.
Drum Clean
This procedure provides a 90°C high temperature
sterilisation to clean the drum. When this procedure is
performed, clothes or other items should not be added.
You may use this program regularly according to your
needs.
Operating Instructions (Continued)

inalto.com.au011
Child Lock
To avoid the washing procedure being altered by children, you can activate the child lock function. All buttons and dials
won’t alter the machines settings, however the
On/O button will still function.
Note: If the machine is switched o when Child Lock is active, it will remain in Child Lock mode when switched back on.
To activate or deactivate the Child Lock:
• Press and hold the “Delay” and “Speed” buttons together at the same time for 3 seconds, whilst the machine is
operating.
• The machine will make an audible tone to let you know that the Child Lock is activated or deactivated.
Note: At the completion of a wash program, the child lock will become deactivated automatically.
Washing Programs Table
Program 6kg
Load
7.5kg
Load Temp. (ºC) Default Time (6/7.5)
Cotton Eco 40ºC 6.0 7.5 40 1:39
Cotton Eco 60ºC 6.0 7.5 60 4:56/4:58
Cotton 6.0 7.5 Cold 1:35
Cotton 20ºC 6.0 7.5 20 1:19
Cotton 30ºC 6.0 7.5 30 1:20
Cotton 40ºC 6.0 7.5 40 1:40
Cotton 60ºC 6.0 7.5 60 1:45
Cotton 90ºC 6.0 7.5 90 2:40
Synthetic 3.0 3.75 Cold 1:18
Synthetic 40ºC 3.0 3.75 40 1:33
Synthetic 60ºC 3.0 3.75 60 1:43
Drum Clean - - 90 1:21
Spin Only 6.0 7.5 -0:12
Drain Only - - - 0:01
Rinse & Spin 6.0 7.5 -0:31
Delicate 30ºC 2.5 2.5 30 1:00
Delicate 2.5 2.5 Cold 0:55
9 Hours 6.0 7.5 40 1:13
6 Hours 6.0 7.5 40 1:13
3 Hours 6.0 7.5 40 1:13
Daily Wash 45' 2.0 2.0 30 0:45
Daily Wash 30' 2.0 2.0 20 0:30
Daily Wash 15' 2.0 2.0 Cold 0:15
Note:
1. Energy labelling program: Cotton at 60°C and
maximum spin speed is the program used for the
AS/NZS 2442 MEPS energy rating.
2. The programs on the left are only recommendations
and users can choose the appropriate program
according to their personal requirements and habits.

User Manual 12
Cleaning & Maintenance
CLEANING PROCEDURES
WARNING: Before beginning any cleaning or maintenance,
always ensure the appliance is switched o, the power plug
is removed from the power outlet and the water supply has
been closed.
CLEANING THE WASHING MACHINE
Proper maintenance of your washing machine will keep it
looking as new and extend its working life.
• The exterior surface can be cleaned with household
cleaners and a soft damp cleaning cloth.
• If there is any residual water at the completion of a
washing program, please use a cloth to wipe it o
immediately.
Note: Never use solvents or harsh cleaning chemicals on
your washing machine’s exterior.
CLEANING THE INTERNAL DRUM
Should any rust form on the inside drum (i.e. water was
left to sit for an extended period of time), please remove
immediately using a chlorine free detergent. Never use
steel wool or a harsh abrasive.
FROZEN WASHING MACHINE
Should the temperature drop below zero and your washing
machine becomes frozen, you should:
• Disconnect the power supply for the washing machine.
• Wash the tap connection with warm water, to help you
to disconnect the inlet pipe.
• Remove the inlet pipe and immerse in warm water
(i.e. within a bathtub).
• Pour some warm water into the washing machine drum
and wait for approximately 10 minutes.
• Reconnect the inlet pipe to the tap and washing
machine and open the water supply.
• Wait until the room’s ambient temperature returns
to above 0°C before trying to operate the washing
machine.
CLEANING THE DETERGENT DRAWER
You should periodically follow these steps to ensure the
detergent drawer remains clean.
• Press down on the arrow, located on the cover for the
fabric softener compartment of the detergent drawer.
• Lift the clip up and remove the fabric softener
compartment cover.
• Wash all grooves with warm water.
• Re-install the fabric softener compartment cover
into the detergent drawer, and push the drawer back
into position.

inalto.com.au13
CLEANING THE INLET FILTER
You should clean the inlet lter periodically, or if you nd
that insucient water is being supplied to your washing
machine when the supply tap is open.
To clean the inlet lter:
• Close the water supply tap.
• Select any wash program (except for Spin Only or Drain
Only) and press the Start/Pause button. Allow the
program to run for about 40 seconds.
• Remove the inlet pipe from the closed tap and use
water to wash the lter.
• Reconnect the inlet pipe to the tap.
To clean the washing machine lter:
• Screw o the inlet pipe from the rear of the washing
machine.
• Pull out the lter with long nose pliers, wash it
thoroughly with water and re-install the lter.
• Reconnect the inlet pipe to the rear of the washing
machine.
• Open the water supply at the tap and ensure there is no
water leakage.
• Once nished, close the water supply tap.
Note: Generally the tap inlet lter is washed rst followed
by the washing machine lter. If only the washing machine
lter is washed, then you should still follow steps 1-3 for
cleaning the inlet lter rst.
REMOVING FOREIGN OBJECTS
WARNING: To avoid the risk of an electric shock, always
remove the power plug from the power
outlet before cleaning the Drain Pump lter.
Periodically you should clean the drain pump lter to ensure
normal operation of your washing machine. The type of
washing, frequency and soil level of your washing cycles
will alter how often this procedure needs to be undertaken,
however you should inspect the lter regularly.
Should your washing machine not empty and/or spin, or
your machine makes unusual noises during
operation, your Drain Pump lter could be blocked. Follow
this procedure to check or remove any
foreign objects.
• After disconnecting the power, open the lter cover at
the front base of your washing machine.
• Unscrew the lter in an anti-clockwise direction and
remove any foreign objects.
• Re-install the lter and close the service panel.
WARNING: Never remove the pump cover when the
washing machine is in operation, always wait until the
appliance has nished and the is empty. There can be hot
water within the pump, so be careful to avoid burns, should
it have operated recently. When replacing the cover, be
careful to ensure it is closed securely.

User Manual 14
Troubleshooting
WARNING
Only authorised technicians can carry out repairs.
Before contacting our customer service team, please refer to the table below to see if your fault can be xed by
yourself. Should a service technician visit be arranged and its found there are no faults with the appliance, a call out
charge will apply.
PROBLEM SOLUTION
Washing Machine
won’t start-up
• Check that the mains plug is inserted and switched on at the power point.
• Check that the door is closed securely.
• Check that the relevant fuse hasn’t blown.
• Check that the On/O button has been pressed.
• Check that the water supply tap has been opened.
Door won’t open • The machine’s safety protection is working. Disconnect the power and reconnect the power.
Heating fault • The NTC is damaged and/or the heating pipe is aging. You should be able to wash the clothes
normally however without the water heating. Please contact our customer service team.
Water is leaking
• The drainage waste pipe may be blocked.
• Check and fasten all water connection pipes.
• Inlet or Outlet hoses may be damaged. Please check.
Water is overflowing from the
base of the machine
• Check that the inlet pipes are connected firmly at the rear of the machine.
• Check that the outlet hose hasn’t been damaged.
Display isn’t lighting up • Check that the power isn’t disconnected.
• PC board may have issues. Please contact our customer service team.
Detergent residues remain in
the detergent drawer
• Ensure you are using a correct amount of detergent.
• Follow the cleaning steps to remove any damp residual detergent from the drawer.
Washing results aren’t
to expectations
• Ensure you are using a sucient amount of detergent.
• Ensure the correct quantity of clothes are being used depending on the wash program selected.
• Ensure you are using the correct wash program to suit the clothing and level of dirtiness.
• Try using an alternative detergent.
Washing machine is making an
abnormal noise or vibrating
• Ensure the washing machine is level.
• Ensure that all transportation bolts have been removed.
• Ensure the appliance has been installed on a solid and level floor.
• Ensure that all legs are making contact with the floor and adjust as required.
• Follow the Drain Pump cleaning procedure and ensure there are no foreign objects.
Note: If the above steps don’t resolve your issue or you cannot resolve the fault by yourself:
• Press the “On/O” button.
• Switch o the appliance at the power outlet and remove the plug.
• Call our customer service team.

inalto.com.au15
INDICATION LIGHTS PROBLEM SOLUTION
Flashing Pause/Start light
and Lock light ( ) Door is not closed properly • Restart after the door is closed • Check if there are clothes or washing articles stuck
Flashing No Spin light Water injecting problem
while washing
• Check if the water pressure is too low
• Straighten the water pipe
• Check if the inlet valve lter is blocked
Flashing No Spin and
Pause/Start light Overtime water draining • Check if the drain hose is blocked
Flashing Prewash light Water overow • Restart the washer
Note: If the above steps don’t resolve your issue or you cannot resolve the fault by yourself:
• Press the “On/O” button.
• Switch o the appliance at the power outlet and remove the plug.
• Call our customer service team.
Technical Specications
Below outlines the technical specications for your InAlto Washing Machine.
Washing Capacity 6.0kg 7.5kg
Dimensions (W � D � H mm) 595 � 495 � 850 mm 595 � 565 � 850 mm
Net Weight 61kg 68kg
Rated Power 1950W 2000W
Power Supply 220-240V, ~50Hz, 10Amp 220-240V, ~50Hz, 10Amp
Standard Water Pressure 0.05MPa~1.0MPa 0.05MPa~1.0MPa
NOTE:
This product is subject to continuous improvement, specication are subject to change without prior notice.
This product was tested in accordance with AS/NZS 2040.2 and AS/NZS6400 using program: "Cotton Eco 60", which is
the program recommended for a normally soiled cotton load at rated capacity.

User Manual 16
Attach your receipt
to this page

inalto.com.au17
Purchase Details
For future reference, please record the following information which can be found on the rating plate and the date of
purchase which can be found on your sales invoice.
STORE DETAILS
STORE NAME
|
ADDRESS
|
TELEPHONE
|
PURCHASE DATE
|
PRODUCT DETAILS
MODEL NO.
|
SERIAL NO.*
|

User Manual 18
WARRANTY TERMS & CONDITIONS
LAUNDRY APPLIANCES
This document sets out the terms and conditions of the
product warranties for Residentia Group Appliances. It is
an important document. Please keep it with your proof of
purchase documents in a safe place for future reference
should you require service for your Appliance.
1. IN THIS WARRANTY
(a) ‘acceptable quality’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian
Consumer Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Residentia Group product
purchased by you accompanied by this document;
(d) ‘ASR’ means Residentia Group authorised service
representative;
(e) ‘Residentia Group’ means Residentia Group Pty Ltd
of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656
in respect of Appliances purchased in Australia;
(f ) ‘major failure’ as referred to in clause 10 of this
warranty has the same meaning referred to in the ACL
and includes a situation when an Appliance cannot
be repaired or it is uneconomic for Residentia Group,
at its discretion, to repair an Appliance during the
Warranty Period;
(g) ‘Warranty Period’ means:
(i) where the Appliance is used for personal,
domestic or household use (i.e. normal
single family use) as set out in the instruction
manual, the Appliance is warranted against
manufacturing defects for 24 months, following
the date of original purchase of the Appliance;
(h) ‘you’ means the purchaser of the Appliance not having
purchased the Appliance for re-sale, and ‘your’ has a
corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia and is in addition to (and does
not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia.
3. During the Warranty Period Residentia Group or its
ASR will, at no extra charge if your Appliance is readily
accessible for service, without special equipment and
subject to these terms and conditions, repair or replace
any parts which it considers to be defective. Residentia
Group or its ASR may use remanufactured parts to
repair your Appliance. You agree that any replaced
Appliances or parts become the property of Residentia
Group. This warranty does not apply to light globes,
batteries, lters or similar perishable parts.
4. Parts and Appliances not supplied by Residentia Group
are not covered by this warranty.
Warranty Information

inalto.com.au19
5. You will bear the cost of transportation, travel and
delivery of the Appliance to and from Residentia Group
or its ASR. If you reside outside of the service area,
you will bear the cost of:
(a) travel of an authorised representative;
(b) transportation and delivery of the Appliance to and
from Residentia Group or its ASR, in all instances,
unless the Appliance is transported by Residentia
Group or its ASR, the Appliance is transported at
the owner’s cost and risk while in transit to and from
Residentia Group or its ASR.
6. Proof of purchase is required before you can make
a claim under this warranty.
7. You may not make a claim under this warranty unless
the defect claimed is due to faulty or defective parts
or workmanship. Residentia Group is not liable in the
following situations (which are not exhaustive):
(a) the Appliance is damaged by:
(i) accident
(ii) misuse or abuse, including failure to properly
maintain or service
(iii) normal wear and tear
(iv) power surges, electrical storm damage or
incorrect power supply
(v) incomplete or improper installation
(vi) incorrect, improper or inappropriate operation
(vii) insect or vermin infestation
(viii) failure to comply with any additional instructions
supplied with the Appliance;
(b) the Appliance is modied without authority from
Residentia Group in writing;
(c) the Appliance’s serial number or warranty seal has
been removed or defaced;
(d) the Appliance was serviced or repaired by anyone
other than Residentia Group, an authorised repairer
or ASR.
8. This warranty, the contract to which it relates and the
relationship between you and Residentia Group are
governed by the law applicable where the Appliance
was purchased.
9. To the extent permitted by law, Residentia Group
excludes all warranties and liabilities (other than as
contained in this document) including liability for any
loss or damage whether direct or indirect arising from
your purchase, use or non use of the Appliance.
10. For Appliances and services provided by Residentia
Group in Australia, the Appliances come with a
guarantee by Residentia Group that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled
to have the Appliance repaired or replaced if the
Appliance fails to be of acceptable quality and the
failure does not amount to a major failure. The benets
to you given by this warranty are in addition to your
other rights and remedies under a law in relation to the
Appliances or services to which the warranty relates.
11. At all times during the Warranty Period, Residentia
Group shall, at its discretion, determine whether repair,
replacement or refund will apply if an Appliance has a
valid warranty claim applicable to it.
12. To enquire about claiming under this warranty, please
follow these steps:
(a) carefully check the operating instructions, user manual
and the terms of this warranty;
(b) have the model and serial number of the Appliance
available;
(c) have the proof of purchase (e.g. an invoice) available;
(d) telephone the numbers shown below.
13. You accept that if you make a warranty claim,
Residentia Group and its ASR may exchange
information in relation to you to enable Residentia
Group to meet its obligations under this warranty.
IMPORTANT
Before calling for service, please ensure that the steps
in point 12 have been followed.
→ Service: Please call 1300 11 HELP (4357)
The Australian Consumer Law requires the inclusion of the following statement with this warranty: Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

TEL. [phone]
[e-mail]
WWW.RESIDENTIA.GROUP
AN INITIATIVE BY
RESIDENTIA GROUP