Indesit WME 12 X Technical manual

M
Washing machine
Instructions for installation and use
Waschvollautomat
Installations- und Bedienungsanleitungen
Lavadora
Instrucciones para la instalación y uso
Máquina de lavar roupa
Instruções para a instalação e a utilização
WME 12 X

Washing machine 1
Instructions for installation and use
Waschvollautomat 15
Installations-undBedienungsanleitungen
Lavadora 29
Instrucciones para la instalación y uso
Máquina de lavar roupa 45
Instruções para a instalação e a utilização
D
GB
E
P

Herearethe11topicsexplainedinthis manual.Read,learnand
have fun: you will discover many secret ways to get a better
wash,moreeasilyandmakingyourwashingmachinelastlonger.
Quick guide
1. Installation and removal (p. 10)
Installation,afterdeliveryortransport,isthemostimportantoperation
forthe correctfunctioning of yourwashing machine.Always check:
1. Thatthe electric systemconforms toregulations;
2. Thatthe inletand drainingpipes are connected correctly.
Never use pipes that have already been used;
3. Thatthe washingmachine islevelled properly;something
worth checking to aid the performance of your
washingmachine;
4. That the drum's fixing screws have been removed from
the back of the washing machine.
2. What goes in your washing machine and how
to start it (p. 2)
A correct distribution of your laundry is vital to the successful
outcomeof thewash andthe lifeof thewashing machine.Learn all
the tips and secrets to dividing your linen:colour, type of fabric.
3. Guide to understanding labels (p. 5)
Thesymbolson thelabelsof yourgarmentsare easy tounderstand
and equally important for the success of your wash.The guide
includessimple instructions tohelp you choose the righttempera-
ture, wash cycles and ironing methods.
4. Useful tips to avoid mistakes (p. 6)
Years back, our grandmothers were the ones who gave us good
advice - and in those days synthetic fibres did not exist: washing
was easy.Today, your washing machine offers you helpful advice
allowing you to wash wool even better than an expert laundress
would by hand.
5. The detergent dispenser (p. 7)
Howtouse the detergentdispenser andthe bleachcompartment.
6. Understanding the control panel (p. 3)
Washing machine’s control panel is very simple.It has only a few
essential buttons to help you choose any type of wash cycle,
rangingfrom themost energetic, capableofcleaning amechanic’s
overalls,tothe most delicateforwool.Familiarising yourselfwith it
will help you get the best out of your wash while helping your
washing machine last longer.It’s easy.
7. Guide to the wash programmes (p. 4)
Herein is an easy table to help you choose the right programme,
temperature,detergents and possible additives.Choose the right
programme and you will get better results with your wash while
saving time, water and energy, day after day.
8. Care and maintenance (p. 13)
With just a bit of care, it will repay you with loyalty and devotion.
With the necessary upkeep, it will wash for years and years to
come.
9. Problems and solutions (p. 8 and 9)
Beforecalling atechnician, readthese pages:immediate solutions
may be found for a number of problems. If the problem persists,
call your local Indesit customer services who will be pleased to
help.Any failure will be repaired, as soon as possible.
10. Technical characteristics (p. 9)
Hereinare the technicalfeatures of yourwashing machine: model
type number, electric and water specifications, size, capacity,
speedof the spin cycleand compliance withItalian and European
regulations.
11. Safety for you and your family (p. 14)
Here you will find the necessary safety guidelines, and it is
important for you to read this section carefully.
1 Instructions for installation and use

Whatgoesinyourwasher?
Before washing,youcando a great dealtoensurebetterresults.Divideyourgarments
according to fabric and colour. Read the labels, follow their guidelines.
Beforewashing.
Divide your washing according
to the type of fabric and colour
fastness.
Emptyall pockets (coins,paper,
moneyand small obejects)and
ensure all loose buttons are
repaired or removed prior to
loading.
How to eliminate the most common stains
Ink and biro Dab with a wad of cotton soaked in methyl alcohol or alcohol at 90°.
Tar Dab with fresh butter, rub in turpentine then wash immediately.
Wax Scrape away, then run a hot iron between two sheets of absorbent paper. Then rub in cotton with turpentine or
methyl alcohol.
Chewing gum Rub in nail polish remover and wipe with a clean rag.
Mold Cotton and white linen should be placed in a solution of 5 parts water, one bleach and a spoon of vinegar, then
washed immediately. For other white fabrics, use hydrogen peroxide at 10volumes and wash immediately.
Lipstick Dab with ether on wool or cotton. Use tricloroetilene for silk.
Nail polish Place a sheet of absorbent paper on the side of the stain, wet it with nail polish remover, shifting the
garment as the sheet gradually changes colour.
Grass Dab with a wad of cotton soaked in methyl alcohol.
Starting the washer
Startingyour washingmachine
in the right way is important for
thequality ofyour wash, tohelp
prevent future problems and
enhancelife expectancyof your
appliance. Once you have
loaded your washing machine
and added the detergent
together with any fabric
conditioner, always check that:
1.The door is closed correctly.
2. The plug is secured in the
socket.
3. The water supply is turned
on.
4. Selector knob Aispositioned
on one of the symbols (Stop/
Reset).
Choosethedesiredprogramme
The programme is selected
accordingtothetypeofgarments
thatneedtobewashed.Tochoose
aprogramme,refertothetableon
page 4. Turn knob Auntil the
selected programme is aligned
with the mark on the knob, turn
knobBtothedesiredtemperatu-
resettings, check that knob Cis
in the desired position, if
necessary use buttons E, F and
G, and lastly, press on/off button
H(Iposition).
Afterinstallingyournewwashingmachine,startawash
cycle by setting programme "1" at 90 degrees.
For more delicate
garments:
protect underwear, tights
and stockings and delicate
items by placing them in a
canvaspouch
Dividing your garments
accordingtofabricand
colour, is very important
for good results
Atthe end of the washcycle...
The Llamp to extinguish: it will
take about three minutes.
Thenturn thewashing machine
off by pressing on-off button H
(Oposition).You can now open
the washing machine door
safely.Afterhavingremoved the
freshly cleaned washing, leave
the door open to allow air
circulationinside the drum.
Alwaysdisconnect electricity at
thesocket andturnoff thewater
supply.
Remember that, in the event
of a power failure, or should
the washing machine switch
itself off, the programme
chosen will remain in its
memory.
The labels say it all.
Always look at the labels: they
tell you everything about your
garment and how to wash it in
the best possible way.
The table on page 5 shows all
meanings behind these
symbols. Their recom-
mendations are important to
achieve better wash results.
Instructions for installation and use 2
M
Bigand small happily
together.
This washing machine has a
specialelectronic controldevice
for even distribution: before the
spin cycle starts, this device
allowsthegarments topositions
themselves, to minimise noise
and vibrations during the spin
cycle.

E
A
B
C
D
FGHIL
The washing machine is
equipped with an extra
compartment 4(provided asan
accessory)for the bleach,to be
inserted in compartment 1.
Easyiron
This function allows your
washing to come out of the
machine without creases,
making it much easier to iron.
Youcan useit withprogrammes
3-4 (Cotton), 5-6 (Synthetics)
and8-9 (Delicates).
Press this button in
programmes 5-6-8-9 and the
wash cycle will come to a stop
onsymbol .You cancomple-
teit bypressing button Eagain.
Important: thisfunction should
notbeusedwhenbuttonG(Stain
removal)has been pressed.
Rapid wash
This button reduces the length
of the wash programme by
about 30%. It cannot be used
with special programmes (see
page 4) or those for wool and
silk.
Stain removal (see page 7)
Thanks to this command, the
washing machine will carry out
a more intensive wash that
optimisesthe effectivenessofthe
liquid additives, thus allowing
more resistant stains to be
removed. When you press the
stainremovalbutton,youcannot
activatethepre-wash.
Here I’m in command
Understandingthecontrolpanel
Making the right choice is important. And it’s easy.
Programme selector knob
Usethisknob toselect thewash
programme.
Turnthis knob clockwiseonly.
To select a programme, you
should turn the knob so that the
symbol/number of the desired
programme is in line with the
pointerontheknob.
Now press on/off button H
(position I), pilot lamp Iwill start
flashing.
After 5", the setting will be
accepted, pilot lamp Iwill stop
flashing(stayinglit)andthewash
cyclewillbegin.
Should you wish to interrupt the
programme in progress or set a
new one, select one of the
symbols (Stop/Reset)andwait
5" : when the cancellation has
been accepted, pilot lamp I
flashes,andyoucanthenturnthe
applianceoff.
Afterthewashcyclehasbeenset
and accepted by the washing
machine, turning the knob will
have no effect (except for when
it is on position Stop/Reset).
Temperature control knob
Itis usedtoset thewash tempe-
rature in the recommended
programmetableonpag.4.Italso
allows you to reduce the tempe-
rature recommended for the
selectedprogramme,andevento
set a cold wash cycle ( ).
Spin exclusion knob
It is used to exclude the spin
cycle (by choosing symbol )
or to reduce the spin speed of
the selected programme. The
maximum speed for the four
types of fabric are:
Fabric Speed
Cotton 1200 rpm
Synthetics 800 rpm
Wool 600 rpm
Silk no
Note: distributionphase will be
carried out at low speed.
Detergent dispenser
It is divided into three
compartments:
1.Detergent forpre-wash;
2.Detergent for the main cycle
wash;
3.Fabricconditioner.
The detergent dispenser with the
additional bleach compartment
is here.
3 Instructionsforinstallationanduse
On-off
When button H is pressed, the
washing machine is switched
on, when it is not the machine
is switched off.
Turning the appliance off
does not cancel the selected
programme.
The on-off lamp
Lamp I flashes when the
appliance is switched on and
awaitingaprogramme tobeset.
A steady light means the
appliance has accepted the
selectedprogramme.
The door block lamp
Thesafetylampindicatesthatthe
washingmachine door islocked
to prevent it from being opened
accidentally. To avoid any
damages to lock mechanism,
you must wait for the lamp to
extinguish, before attempting to
openthedoorwhichtakesaround
threeminutes.
MAX
12
4
3

Type of fabric and degree of soil Programme
knob Temperature knob Detergent for wash Fabric softener Stain rem. button/
Bleach
Length of
the cycle
(minutes)
Description of wash cycle
COTTON
Exceptionally soiled whites (sheets,
tablecloths, etc.) 1 90°C ◆◆ 165 Prewash cycle, wash cycle at 90°C, rinse
cycles, intermediate and final spin cycles
Exceptionally soiled whites (sheets,
tablecloths, etc.) 2 90°C ◆◆
Del./Trad. 145 Wash cycle at 90°C, rinse cycles,
intermediate and final spin cycles
Heavily soiled whites and fast colours 3 60°C ◆◆
Del./Trad. 130 Wash cycle at 60°C, rinse cycles,
intermediate and final spin cycles
Slightly soiled whites and delicate
colours (shirts, jumpers, etc.) 4 40°C ◆◆
Del./Trad. 95 Wash cycle at 40°C, rinse cycles,
intermediate and final spin cycles
Rinse cycles/Bleach ◆Del./Trad. Rinse cycles, intermediate and final spin cycles
Spin cycle Draining and final spin cycle
Stop/Reset Interrupts/Cancels the selected programme
SYNTHETICS
Heavily soiled fast colour synthetics
(baby linen, etc.) 5 60°C ◆◆
Delicate 100 Wash cycle at 60°C, rinse cycles, anti-
crease or delicate spin cycle
Delicate colour synthetics
(all types of slightly soiled garments) 6 40°C ◆◆
Delicate 70 Wash cycle at 40°C, rinse cycles, anti-
crease or delicate spin cycle
Delicate colour synthetics (all types of
slightly soiled garments)7 30°C ◆◆ 30 Wash cycle at 30°C, rinse cycles and
delicate spin cycle
Rinse cycles/Bleach ◆Delicate Rinse cycles, anti-crease or delicate spin
cycel
Fabric softener ◆Rinse cycles with automatic introduction of
softener, anti-crease or delicate spin cycle
Spin cycle Draining and delicate spin cycle
Stop/Reset Interrupts/Cancels the selected programme
DELICATES
Hand wash 8 40°C ◆◆ 60 Wash cycle at 40°C, rinse cycles and
delicate spin cycle
Particularly delicate garments and
fabrics (curtains, silk, viscose, etc.) 9 30°C ◆◆ 50 Wash cycle at 30°C, rinse cycles, anti-
crease or draining
Rinse cycles ◆Rinse cycles, anti-crease or draining
Spin cycle Draining and delicate spin cycle
Draining Draining
Stop/Reset Interrupts/Cancels the selected programme
A programme for all seasons
What are you washing today?
Instructionsforinstallationanduse 4
Daily wash Your washer has a programme available for the washing of lightly soiled garments in a short amount of time.
By setting programme 7 at a temperature of 30°C, you can wash different types of fabrics together (except for wool and silk), with a
maximum load of 3kg. This programmes allows you to save on both time and energy as it only lasts around30 minutes.
WE RECOMMEND THE USE LIQUID DETERGENT.
Important: to cancel the wash programme you have just set, select one of the symbols (Stop/Reset) and wait for at least 5 seconds.
Special programme
The data found in the table is purely indicative, and can vary according to the quantity and type of washing, the water system temperature and
the room temperature.

Wash Bleaching Ironing Dry cleaning Drying
Strong
action
Delicate
action
High
Temp.
Low
Temperat.
Wash at
95°C Bleaching only in cold water Hot iron at max 200°C Dry clean with any solvent Machine dryable
Wash at
60°C Do not bleach
Medium hot
ironing at
max 150°C
Dry clean only with
perchloride, benzine
av., pure alcohol,
R111 and R113 Do not machine dry
Wash at
40°C Iron at max 110°C
Dry clean with av.
benzine, pure alcohol
and R113 Spread to dry
Wash at
30°C Not ironable Do not dry clean
Hang to dry
without spin
drying
Hand wash Dry on clothes hanger
Not
washable in
water
Understanding labels
Learnthemeaning of these symbolsandyouwill get better
results, your garments will last longer resulting in an
improvedwash.
Allover Europe,garment labels
containmessages expressedin
small yet important symbols.
Understanding them is very
important if you want to get
better results and treat your
garmentsthe way theydeserve
tobe treated.
These symbols are divided in
five different categories and
shapes:
washing , bleaching ,
ironing ,dry cleaning and
drying .
Consult and learn the symbols in this table: they will help you
obtain a better wash, treat your clothes properly, and get a
better performance out of your washing machine.
Useful tips
Turn shirts inside out to get better results
and make them last longer.
Always empty pockets of their contents.
Look at the label: it will always give you useful
advice.
When loading your washing, try to have a mixture
of large to small items. Make sure you select the right
temperature!
5 Instructions for installation and use
l
c
A
P
F

Usefultips
Never use your washing
machinetowash...torn,fraying
or non-hemmed linen. If it is
absolutelyneccessary,placeitin
abagforprotection.Donotwash
colouredlinenwithwhites.
Watch the weight!
For best results, do not exceed
the weight limits stated below
(figures show weight of dry
garments):
- Resistant fabrics:
5 kg maximum
- Synthetic fabrics:
2.5 kg maximum
- Delicate fabrics:
2 kg maximum
- Pure new wool:
1 kg maximum
How to wash almost anything
Curtains.
Curtains tend to crease a great
deal. A useful tip to reduce
creasing: fold the curtains and
place them in a pillow case or
meshbag. Donot loadanything
else inside the appliance, this
will ensure that the overall
weightdoes notexceed thehalf
load. Remember to use the
specific programme 9which
automaticallyexcludes the spin
cycle.
Trainers.
Once you have removed mud
and dirt from trainers, you can
even wash them with jeans or
any other tough garments. Do
not wash trainers with whites.
Quilted coats and anorak.
You canwashquilted coatsand
wind-cheaters, too, if they are
padded with goose or duck
down. Do not load more than
2-3 kg and never load 5 kg.
Repeat rinse once or twice
usingthe gentle spin.
How much does it weigh?
1sheet400-500 gr.
1pillowcase150-200 gr.
1tablecloth400-500gr.
1bathrobe900-1,200gr.
1towel150-250 gr.
Coloured T-shirts, printed
ones and shirts last longer if
turnedinsideoutbeforewashing.
Printed T-shirts and sweatshirts
shouldalwaysbeironedinsideout.
Dungaree alert.
Very popular “salopette” type
overalls have straps with hooks
thatcandamagethedrumofyour
washing machine or other
garments during the wash. To
minimisetherisk, place hooksin
thepocketandfastenwithsafety
pins.
Holidays: unplug the
appliance.
It is recommended that you
shouldunplugthe machinefrom
thesocket and turnoff thewater
supply. Leave the door ajar to
allow air circulation to the draw
andthedoorgasketarea.Thiswill
preventunpleasantodours.
Instructions for installation and use 6
For best results, we
recommend you use a
specific detergent, taking
carenotto washmorethan
1kgof laundry.
WOOLCYCLE

You must follow the dosage
recommendations provided by
themanufacturers whenadding
detergent or fabric conditioner.
Doseswill varyaccording tothe
wash load, the water hardness
andhow soiledthe washingis.
Experience will help you select
the right dosage almost
automatically:itwillbecomeyour
secret.
Beforeaddingdetergent forpre-
washing in compartment 1,
make sure that the extra
compartment for bleach 4has
notbeen inserted.
Ensure no overfilling when
adding fabric conditioner in
compartment3.
The washing machine automa-
tically adds the softener to the
washin eachprogramme.
Liquid detergent is poured into
compartment 2just a few
seconds before starting the
wash cycle.
Incompartment1:
Detergentfor pre-washing(powder)
Incompartment2:
Detergentfor washing
(powder or liquid)
Incompartment3:
Additives(softeners,perfumes, etc.)
Incompartment4:
Bleach and delicate bleach.
Usefultipsabout thedetergentdispenser
It’s important for a good wash
The first secret is the easiest: the detergent dispenser is
opened by rotating it outwards.
Rememberthat liquiddetergent
is only designed for wash
cycles of up to 60 degrees on
non pre-wash items.
Specialcontainers aresold with
liquid or powder detergents for
placing inside the washing
machine drum, these are
positioned according to the
instructions found in the
detergentbox
Never use hand wash
detergent,because it may form
too much foam, which could
damagethe washing machine.
Detergents that are specifically
formulated for both hand and
machine wash are an
exception.
One last secret: when washing
with cold water, always reduce
theamountofdetergentyouuse:
it dissolves less easily in cold
water than in hot water, so part
of it would be wasted.
Cuttingcostsefficiently A guide to environmentally
friendly and economic use
of your appliance.
MAXIMISETHE LOADSIZE
Achieve the best use of energy, water, detergent and time by using the recommended
maximum load size.
SAVE up to 50% energy by washing a full load instead of 2 half loads.
DO YOU NEED TO PRE-WASH?
For heavily soiled laundry only!
SAVE detergent, time, water and between 5 to 15% energy consumption by NOT
selecting Prewash for slight to normally soiled laundry.
ISA HOT WASH REQUIRED?
Pretreat stains with stain remover or soak dried in stains in water before washing to
reduce the necessity of a hot wash programme.
SAVE up to 50% energy by using a 60°C wash programme.
BEFORE USING A DRYING PROGRAMME ...
SAVE energy and time by selecting the highest suitable spin speed to reduce the water
content in laundry before using a drying programme.
The detergent dispenser can be
removed and cleaned: pull it outwards,
as indicated in the figure.Then leave it
under running water for a few minutes.
7 Instructions for installation and use
Bleach cycle and stain remover
button
If bleaching is necessary, the
extra case 4(provided)mustbe
inserted into compartment 1of
thedetergent dispenser.
When pouring in the bleach,be
carefulnot toexceed the"max"
level indicated on the central
pivot (see illustration).
Theuse ofthe additional bleach
container excludes the
possibilityofusing thepre-wash
cycle. Traditional bleach can
only be used on sturdy white
fabrics, whereas delicate
bleach can be used for
coloured fabrics, synthetics
and for wool.
You cannot bleach with the
“Silk” programme and with the
“special programmes” (see
page4).
Use the stain removal button
every time you want to bleach.
Should you want to do it
separately you must pour the
bleach into the additional
container 4, press button G
(stain removal), start the
washing machine, then select
one of the symbols
according to the type of fabric.
When you bleach during a
normal wash cycle, pour the
detergent and any additives in
the special compartments,
press button G (stain removal),
set the programme you desire
and turn the washing machine
on.
1
2
MAX
12
4
3
MAX
MAX

Thewashingmachine
fails to fill with water.
Is the hose correctly
connected to the tap?
Is there a water shortage ?
There could be work in
progress in your building or
street.
Is there sufficient water
pressure? The autoclave
maybe malfunctioning.
Is the tap filter clean? If the
water is very calcareous, or
if work has recently been
carried out on the water
piping, the tap filter could be
clogged with particles and
debris.
Is the rubber hose kinked?
The tract of the rubber hose
bringing water to washing
machine must be as straight
as possible. Make sure it is
not squashed or kinked.
Theprogrammeselector
knobkeepsturning?
Wait a few minutes for the
drain pump to empty the
tub, switch the washer off,
select one of the symbols
stop/reset , then switch it
backon.If theknob continues
to turn, call for assistance
because it is showing an
anomaly.
Thewashingmachine
continuouslyfillsand
drains water.
Isthe drain hosepositioned
too low? It must be installed
ata height rangingfrom 60 to
100cm.
Is the end of the hose
immersed in water?
Does the wall drainage
system have a breather
pipe? If the problem persists
even after these checks, turn
the water supply off the
machine and call for
assistance.
Ifyou live onan upperfloor of
your building, there may be a
problem withyourdraintrap.
To solve this problem, a
special valve must be
installed.
Before calling,read the following
Troubleshooting
In most cases, when your washing machine fails to work, the problems arising
can be easily solved without having to call for a technician. Before calling for
assistance, always check these points.
Thewashingmachine
fails to start.
Istheplugcorrectlyinserted
intothesocket? Itcouldhave
beenmovedwhilstcleaning.
Is there electricity in the
house?
A circuit breaker may have
switched off as a result of too
many electrical appliances
working at the same time. Or
maybeduetoageneral failure
inyourentire area.
Is the washing machine
doorclosedproperly?
For safety reasons, the
washingmachinecannotwork
if the door is open or not shut
properly.
Is the On/Off button
pressed?
Ifitis,thenaprogrammedstart
hasbeen set.
Is the programmed start
knob,inthecorrect position
for those models
concerned?
Is the water supply turned
on? For safety reasons, if the
washing machine does not
load water, it cannot start a
wash cycle.
RIGHT WRONG
Turn off the water
supply after use.
This will eliminate
the possibility of
leakage.
Always leave the
appliance door ajar
to avoid bad odours.
Clean the
appliance’s
exteriors gently.
To clean the
exteriors and the
rubber parts of the
appliance, always
use a soft cloth
dipped in warm and
soapy water.
Leave the washing
machine plugged in while
cleaning.
Even during maintenance,
the appliance should
always be unplugged.
Use solvents and
aggressive abrasives.
Never use solvents or
abrasives to clean the
external and rubber parts
of the washing machine.
Neglect the detergent
dispenser.
It is removable and can
easily be cleaned by
leaving it under running
water.
Go on holiday without
thinking about her.
Before leaving, always
make sure that the
washing machine is
unplugged and that the
water supply is turned off.
Instructions for installation and us e 8
Simple: with the new Indesit technology, you need less than
half of it, to get good results on twice as much!
This is why you cannot see the water through the door:
because there is little, very little of it, to respect the
environment yet without renouncing maximum cleanliness.
And, on top of that, you are also saving electricity.
But where did all the water go?

Model WME 12 X
Dimensions width 59,5 cm
height 81,5 cm
depth 54 cm
Capacity from 1 to 5 kg
Electrical
connections voltage 220/230 Volt 50 Hz
maximum absorbed power 1850 W
Water connections maximum pressure 1 MPa (10 bar)
minimum pressure 0,05 MPa (0,5 bar)
drum capacity 46 litre
Spinning speed up to 1200 rpm
Control programs in
compliance with
IEC regulation 456
programme 3; temperature 60°C; carried out with 5 kg load.
This appliance conforms with the following E.E.C. directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications
- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications
Too much foam.
Isthe detergent appropriate
for machine washing?
Check whether the definition
onitslabel reads“formachine
wash” or “hand and machine
wash”, or any other similar
wording.
Is the correct amount being
used? Anexcessive amount
of detergent, besides
producing too much foam,
does not guarantee a more
effective wash, and causes
scalingin theinternalparts of
theappliance.
If, despite all checks, the
washing machine fails to
function and the problem
persists, call your nearest
authorised Customer Service
Centre, providing the following
information:
- thenature of malfunction
- the model type no.(Mod.....)
- the serial number (S/N ....)
Thisinformationcanbefoundon
the data plate situated at the
back of the washing machine.
Is there space between the
machine and adjacent
units? If it is not a built-in
model, the washing machine
will oscillate a bit during the
spincycle. Afew cm ofspace
should therefore be left
aroundit.
The washing machine
leaks.
Is the metal ring of the inlet
hose properly attached?
Turn off the water supply,
unplug the appliance and try
tightening its attachment
withoutforcing it.
Is the detergent dispenser
obstructed? Remove and
wash it under tap water.
Is the drain hose well
attached?Turn off the water
supply, unplug the appliance
and try tightening its
attachment.
Is the washing machine’s
drain duct clogged? Isthere
an extension of the drain
hose? If so, is it positioned
incorrectly, blocking the
water flow?
Excessive vibration
during the spin cycle.
Havealltransit screws been
removed durind instal-
lation? See the following
page on installation
procedures.
Has the washing machine
beenlevelledcorrectly?The
levelling of the appliance
should be checked
periodically. Adjust the feet
and check them with a level.
The washing machine
does not drain or spin.
Does the selected
programme incorporates
water draining? Some
programmes stop at the end
of the wash cycles and
draining will have to be
selected manually.
Is the“Easy iron" function
-where provided - enabled?
Thisfunction requires manual
selectionfor draining.
Is the drain hose kinked?
The tract of the drain hose
must be as straight as
possible.Make surethe drain
hose is not squashed or
kinked.
Technical characteristics
Alwaysget
assistancefrom
authorised
techniciansand
always insist on
original spare parts.
9 Instructions for installation and use

When the new
washer arrives
Installationand removal
Whether new or just transported to a new house,
installation is extremely important for the correct
functioning of your washing machine.
The hook to be used in case the
drain hose ends at a height below
60 cm.
If the drains hose empties into
a tub or sink then fit the plastic
guide and secure it to the tap.
The guide for draining into tubs and
sinks.
The end of the drain hose must
be positioned so that it cannot
becomesubmerged.
Extensions are unadvisable. In
case of absolute need, the
extension must have the same
diameterastheoriginalhoseand
mustnotexceed150cm.Incase
of wall draining pipes, their
efficiency must be checked by
a qualified technician. If the
dwelling is on one of the upper
floorsofabuilding, theremaybe
draintrap problemscausing the
washing machine to load and
unloadwatercontinuously.
In order to avoid such an
inconvenience,specialanti-drain
trap valves are available in
shops.
After removing the appliance
from its packaging, check that it
is intact. If in doubt, contact a
qualifiedtechnicianimmediately.
The inside of the machine is
supported,fortransportation,by
4screwsonthebackpanel.
Before using the washing
machine, remove the screws,
remove the spacers together
with the rubber tubes attached
to them (keeping all the parts)
and use the plastic plugs
provided to fill in the holes.
Levelling
The washing machine must be
levelled appropriatey in order to
guaranteeitscorrectfunctioning.
Toleveltheappliance,thefrontfeet
must be adjusted; the angle of
inclination,measuredaccordingto
theworktop,mustnot exceed 2°.
When placed on carpet, make
suretheventilationisnotreduced.
The front feet are adjustable.
Connection to the water
mains
Waterpressuremustrangewithin
the values indicated on the data
plate on the rear of your washing
machine. If the water pipes are
new or left unused, then before
connecting the machine run the
wateruntilcleartoremovedebris.
Connect the inlet hose to a cold
watertaphavinga¾“BSPthread.
Ensure that the rubber sealing
washers are fitted at each end of
theinlethose,withthefitterwasher
atthetapend.
A
The rubber gasket.
Connect the inlet hose to the
threaded connector on the
machinerear.
Water pipe inlet at the top right.
Connecting the drain hose
Therearetwohooks(rightorleft)
on the rear of your washing
machinetowhich thedrainhose
istobefixed.Insertthe otherend
ina stand pipeor placeit on the
edge of a sink or tub avoiding
excessive kinks and bending. It
should be placed at a height
rangingfrom60 to100cm. Ifitis
necessary to fix the end of the
hose at a height below 60 cm
fromtheground, itmustbe fixed
intheappropriatehookplacedon
theupperpartof thebackpanel.
Warning!
The company denies all
liability if and when these
norms are not respected.
Plastic bags, expanded
styrofoam, nails and other
packaging parts are not
children’s toys, and are
potentially dangerous.
Retain the transit screws,
spacers and washers.
Should you move house
then these should be
replaced to support the
inside of the machine to
prevent damage when
transporting the machine.
Instructions for installation and use 10
Electric connection
Beforeconnectingtheappliance
totheelectricsocket,besurethat:
1) the electric socket is able to
sustain the appliance’s
maximum power load
indicated on the data plate
and in compliance with the
law;
2) the supply voltage is
included within the values
indicated on the data plate;
3) thesocketis compatiblewith
theappliance’splug.Ifnot, do
notuseadapters,butreplace
eitherthesocketor theplug;
4) electrichouseholdappliances
must be equipped with an
“earthing”system.

11 Instructions for installation and use
Mounting the wooden panel
onto the door and inserting
the machine into cabinets:
In the case where the machine
must be shipped for final
installation after the wooden
panel has been mounted, we
suggest leaving it in its original
packaging.The packaging was
designed tomake it possibleto
mount the wooden panel onto
themachine withoutremoving it
completely (see figures
below).
The wooden panel that covers
thefaceofthe machinemustnot
be less than 18 mm in
thicknessand canbe hingedon
either the right or left. For the
sake of practicality when using
the machine, we recommend
that the panel be hinged on the
same side as the door for the
machine itself - the left.
Door Mounting Accessories
(Fig.1-2-3-4-5)
- No. 6 type Aself-threading
screws, l =13 mm.
- No. 2 type Bmetric,
countersunk screws, l =25; for
fasteningthemagnetplatetothe
cabinet.
- No. 4 type Cmetric screws,
l=15mm;formountingthehinge
supports to the cabinet.
- No. 4 type Dmetric screws,
l=7mm;formountingthehinges
on the supports.
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5
N° 2 Hinges
N° 1 Magnet N° 1 Magnet plate
N° 1 Rubber plug
N° 2 Hinge Supports
Instructionsforthefitter
AB
CD
E
1
2
3
4
5
6
lavabiancheria
washing machine
machine laver
waschmaschine
Lato porta
Door side
Cote porte
Tur seite
1
2
3
4
5
6
lavabiancheria
washing machine
machine laver
waschmaschine
Lato porta
Door side
Cote porte
Tur seite
Fig. 4/B
N° 1 Spacer

Instructions for installation and use 12
Mounting the Parts onto the
Face of the Machine
-Mount thehinge supportsonto
the face of the machine,
positioningthehole indicatedby
the arrow in fig. 1 towards the
inside of the face and using the
type Cscrews.
- Mount the magnetic plate on
the opposite side, at the top,
using the two type Bscrews.
- Place the spacer illustrated in
fig. 4/B between the appliance
front and the magnet receiver.
Using the DrillingTemplate
- To trace the positions of the
holesontheleft-hand sideofthe
panel,align thedrilling template
to the top left side of the panel
using the lines traced on the
extremities as a reference.
- To trace the positions of the
holes on the right-hand side of
the panel, align the drilling
template to the top right side of
thepanel.
- Use an appropriately sized
routertomilltheholesforthetwo
hinges,the rubber plug andthe
magnet.
Mounding the Parts onto the
Wooden Panel (Door)
-Insertthehinges intothe holes
(the movable part of the hinge
mustbe positionedfacing away
fromthe panel)andfasten them
with the 4 type Ascrews.
- Insert the magnet into the top
holeon the opposite sideof the
hingesand fastenit withthe two
type Bscrews.
- Insert the rubber plug into the
bottomhole.
The panel is now ready to be
mountedonto the machine.
Mounting the Panel into the
machine
Insert the nib of the hinge
(indicatedby the arrowin fig. 2)
into the hole for the hinge and
pushthepanel towardsthefront
of the machine. Fasten the two
hinges with the type Dscrews.
Fastening the plinth guide
Ifthe machine isinstalled at the
endofaset ofmodularcabinets,
mount either one or both of the
guidesfor the basemolding (as
shownin fig. 8).Adjust them for
depth based on the position of
the base molding, and, if
necessary, fasten the base to
theguides (fig. 9).
This is how to assemble the
plinthguide (fig.8):
Fig. 6 Fig. 7 Fig. 9
D
C
C
Adjustingtheapplianceheight
Theheight of theappliance can
be adjusted (from 815 mm to
835 mm), by turning the 4 feet.
Should you require the
appliance to be placed higher
thantheabove height,youneed
touse thefollowing accessories
to raise it to up to 870 mm:
- the two crossbars (G)
- the 4 feet (H)
- the 4 screws (I)
- the 4 nuts (L)
then perform the following
operations(fig. 11):
removethe 4originalfeet,place
a crossbar Gat the front of the
appliance, fastening it in place
using screws I(screwing them
in where the original feet were)
then insert the new feet H.
Repeat the same operation at
the back of the appliance.
Now adjust feet Hto raise or
lower the appliance from 835
mm to 870 mm.
Once you have reached the
desiredheight, lock nutsLonto
crossbar G.
Fig. 11
LI
H
G
To adjust the appliance to a
heightbetween870 mmand900
mm,you need tomount stripM,
adjusting feet Hto the required
height.
Insert the strip as follows:
loosen the three screws N
situated at the front of the Top
cover of the appliance, insert
strip Masshown in fig.12, then
fasten screws N.
Accessories provided for the
height adjustment
Thefollowingcanbefoundinside
thepolystyrene lid(fig. 10):
2 crossbars (G),
1 strip (M)
thefollowingcanbefound inside
theappliancedrum:
4additional feet (H),
4 screws (I),
4 screws (R),
4 nuts (L),
2 plinth guides (Q)
Fasten angle Pusing screw R,
insert plinth guide Qinto the
special slot and once it is in the
desiredposition, lock it inplace
using angle Pand screw R.
Insertingthe machine intothe
Cabinet
- Push the machine into the
opening, aligning it with the
cabinets(fig. 6).
-Regulate theadjustable feet to
raise the machine to the
appropriateheight.
- To adjust the position of the
wooden panel in both the
vertical and horizontal
directions, use the Cand D
screws, as shown in fig. 7.
Important:closethe lowerpart
of the appliance front by
ensuring that the plinth rests
againstthefloor.
Fig. 10
Fig. 12
Fig. 8
M
570
min
815
540
595
820 ÷ 900
600 min

Treat your machine well and it will provide
many years of trouble free service
Easy Care and Maintenance
Your washing machine is a reliable companion in life and on the job. It is just as important for you to keep it
in shape.
Your washing machine is
designed to provide reliable
service over many years. A few
simplesteps willhelp toprolong
its life and avoid problems. It is
advisable, to turn off water taps
when the machine is not to be
used, this protects the hoses,
etc.
If the water in your area is too
hard, use a deliming product
(water is hard if it often leaves
whitish stains around taps or
drains,especially ofbath tubs.
Formoreaccurateinformationas
to the type of water in your
system, call the local water
worksor alocal plumber).
Pockets must always be
emptied removing even pins,
badges and any other hard
object.
The washing machine exterior
should be cleaned with a rag
dipped in lukewarm water and
soap.
Neverexaggerate with doses.
Normal detergents already
containdeliming agents. Onlyif
the water is particularly hard,
that is, rich in lime content, do
we recommend the use of a
specific product at every wash.
A periodical wash cycle with a
dose of a deliming product,
without detergents or washing,
may prove useful.
Never use too much detergent
or additives because this could
cause an excess amount of
foam, scaling and possible
damagetothe componentparts
of your washing machine.
When in need, check the pump and the rubber hose.
The washer comes equipped with a self-cleaning pump that does not require any cleaning or maintenance.
The water inlet hose
Check the rubber hose at least once a year. If you see any cracks, replace it immediately. When you use your washing
machine, water pressure is very strong and a cracked tube could easily split open.
It is important to wash
the detergent dispenser
regularly.
Topreventdriedwashing
powderfrom
accumulating,placethe
dispenserunderrunning
water for a few minutes.
Do not forget to empty all pockets: small objects can
cause damage to your washer.
13 Instructions for installation and use

Instructions for installation and use 14
Your safety and that of
your family
Importantforthesafeuseofyourwashingmachine
Your washer has been built in compliance with
the strictest international safety regulations. To
protect you and all your family.
Read these instructions and all
the information in this manual
carefully:they are an important
source, not only of numerous
useful tips, but also of vital
information on safety, use and
maintenance.
1. themachine should notbe
installed in an outdoor
environment, not even
when a roof shelters the
area,becauseitmaybe very
dangerous to leave it
exposed to rain and
thunderstorms.
2. It must only be used by
adults and exclusively for
washing clothes following
the instructions provided in
thismanual.
3. Shouldit have tobe moved,
proceedwith thehelp oftwo
or three people and handle
it with the utmost care.
Never try to do this alone,
because the appliance is
very heavy.
4. Before loading the washing
machine, make sure the
drum is empty.
5. Never touch the washing
machine when barefoot or
with wet or damp hands
or feet.
6. Never use extensions or
multiple plugs, which are
particularly dangerous in
humid environments. The
power supply cable must
never be bent or
dangerously compressed.
7. Never open the detergent
dispenser while the
appliance is functioning;
do not use hand wash
detergent because the
abundance of foam could
damage its internal parts.
How to change the power supply cable
The washing machine
power supply cable is
specialandcanbepurchased
exclusively from authorised
Technical Service Centres.
To replace the cable:
1.Makesurethatthemachine
isswitchedoffandunplugged.
2. Remove the cover by
unscrewing screws I[fig 13].
3. Disconnect the wires from
the radio interference
suppressor F[fig. 14] noting as
to their position (Blue=Nwire;
Brown=L wire) leaving the
earth wire until last .
N.B.: letters L, Nand the
symbol are indicated on the
radio interference suppressor.
4. Remove the screw and
washerV[fig.15],whichactas
astopforthecablepassageway.
5.Remove theupperpartofthe
cable slightly from the back
panel of the appliance, pull the
powersupplycableupwardsand
take it out [fig. 16].
To connect the new power
supplycable,reversethepro-
cedure.
It is important for your
safety that you reassemble
all parts and screws used.
8. Never pull on the supply
cable or the washing
machine to disconnect it
from the wall socket: it is
extremelydangerous.
9. While the appliance is
functioning, do not touch
the drain water as it could
reach very high
temperatures. The
appliance door, during
wash cycles, tends to
become hot; ensure that
children do no touch it.
Never force the washing
machine door because
this could damage the
safety lock which prevents
accidentalopeningwhenthe
nachine is working. Allow a
fewminutesatthe endofthe
program for the lock to
release.
10. In case of malfunctioning,
first close the water tap
and unplug the appliance
fromthewallsocket;donot
under any circumstances
touch internal parts in order
toattempt repairs.
Ionlywantan authorised
specialisedtechnician with
original Indesitspare parts!
Fig. 13 Fig. 14 Fig. 15 Fig. 16
NL
F

Erkunden Sie hier die 11 Argumente, die auf
nachfolgenden Seiten dieses Handbuches näher erklärt
werden. LesenSie diese, merkenSie sich dieseund haben
Sie viel Spaß dabei; Sie werden viele kleine Geheimnisse
entdecken,dieIhnen dazu verhelfen, besserundmüheloser
zu waschen und Ihren Waschvollautomaten länger zu
erhalten.
Kurzanleitung
15 Installations- und Bedienungsanleitungen
1. Installation und Umzug (Seite 24)
DieInstallation,seies dieeinesneuenGerätesoder dienacheinem
Umzug, ist die wichtigsteVoraussetzung für die optimale Betriebs-
weiseIhrerWaschmaschine.InjedemFalleistsicherzustellen:
1. dassdieElektroanlagedeneinschlägigenVorschriftenentspricht;
2. dassVersorgungs-und Ablaufschläuchevorschriftsmäßig
angeschlossenwurden.Verwenden Sie niemals bereits
gebrauchte Schläuche.
3. dassderWaschvollautomatebenaufgestellt wurde.Es macht
sichbelohnt:durchlängereLebensdauerund besteWasch
wirkung;
4. dassdieaufderRückwanddesWaschvollautomatenbefindlichen
Trommel-Befestigungsschraubenabgenommenwurden.
2. Was kann imWaschvollautomaten gewaschen
werden und wie wird er in Betrieb gesetzt? (Seite 16)
Einkorrektes SortierenIhrerWäsche istnicht nurfür ein optimales
Waschergebnis von äußerster Wichtigkeit, sondern auch für die
Lebensdauer des Gerätes. Lernen Sie die wichtigen Kniffe und
Tips, die beim Wäschesortieren zu beachten sind: Farben,
Gewebeart, Neigung zu Flusenbildung sind die wichtigsten
Kriterien.
3. Leitfaden zurVerdeutlichung der Etiketten (Seite 19)
Die auf den in jedem Kleidungs- bzw.Wäschestück befindlichen
Etiketten abgebildeten Symbole sind leicht verständlich und
äußerst wichtig für ein optimales Waschergebnis. In diesem
Abschnitt erhalten Sie einige Tips zu den empfohlenen
Temperaturen,der Artder Behandlung, derBügelweise.
4. Praktische Ratschläge um Fehler zu
vermeiden (Seite 20)
EinmalwarenesunsereGroßmütter,dieuns mitgutenRatschlägen
zurSeitestanden,außerdemgabesdamalsnochkeineKunstfasern:
Heute ist es nicht mehr so einfach.Aber es gibt Waschmaschine,
dieIhnen mitguten Ratschlägenzur Seitesteht. Siekönnen sogar
Wollwäschebedenkenlos inder Maschine waschen.
5. Die Waschmittelschublade (Seite 21)
Wound wie werden Reinigerund eventuelle Zusätze eingefüllt?
6. Machen Sie sich mit der Schalterblende
vertraut (Seite 17)
Die Schalterblende IhrerWaschmaschine ist klar und übersicht-
lich.Rasch übersehen Sie, welchesWaschprogramm zu wählen
ist und wie es abgerufen werden kann, vom energischsten Voll-
waschprogramm bis hin zum Schonprogramm für Wolle. Sie
werden sehen, es wird ganz leicht sein.
7. Leitfaden zur Wahl der Programme Ihrer
Waschmaschine (Seite 18)
Eineeinfache,praktische,übersichtlicheTabellehilft Ihnen beider
Wahl derTemperaturen, des geeignetenWaschmittels und even-
tuellerZusätze.EinekorrekteWahl dieserKomponenten,einean-
gemessene Dosierung des Waschmittels sind eine Garantie für
optimale Waschergebnisse.Sie sparen Zeit, Wasser und Strom,
Tag fürTag.
8. Reinigung und Pflege (Seite 27)
Waschmaschine ist Ihre Freundin: Sie verlangt nur einige kleine
Aufmerksamkeiten und dankt Ihnen dafür mit Treue und
Zuverlässigkeit.
Pflegen Sie sie, und Sie werden noch lange Freude an Ihrer
Maschinehaben.
9. Probleme und Lösungen (Seite 22 und 23)
BevorSieden EinsatzeinesTechnikersanfordern,lesenSie diesen
Abschnitt:Für vieles findet sich eine einfache, sofortige Lösung.
Sollten Sie jedoch keine geeignete Lösung finden, dann fordern
Sieden Indesit-Kundendienstan, derfür eine sofortigeBehebung
einer jeden Betriebsstörung sorgen wird.
10. Technische Eigenschaften (Seite 23)
Hierfinden Sie die technischenDaten IhresVollwaschautomaten:
Modellkennzeichen, Daten für denElektro- undWasseranschluss,
Abmessungen, Kapazität, Schleudertouren und Überein-
stimmungserklärung mit den italienischen und europäischen
RichtlinienundVorschriften.
11. Ihre Sicherheit und die Ihrer Kinder (Seite 28)
Hierfinden Sie unentbehrliche Ratschlägefür Ihre Sicherheit und
die Ihrer Familie.Die wichtigsteVoraussetzung!

Installations- und Bedienungsanleitungen 16
M
Was darf in die Waschmaschine?
Sie können viel dazu beitragen, dass Ihre Wäsche besonders rein wird, noch bevor der Waschvorgang
beginnt. Trennen Sie die Wäsche nach Farben und Material. Kontrollieren Sie die Wäscheetiketten
und befolgen Sie die dort aufgezeichneten Waschanleitungen. Geben Sie abwechselnd kleine und
große Wäschestücke in die Wäschetrommel.
Vor demWaschen.
Trennen Sie die Wäsche nach
Material und nach Farbfestigkeit:
strapazierfähigeStoffesolltennicht
gemeinsam mit Feinwäsche
gewaschenwerden.
Helle Farben müssen stets von
dunklen getrennt gewaschen
werden.
EntleerenSiealleTaschen(Klein-
geld, Papier, Geldscheine und
Kleingegenstände)undkontrollie-
renSieauchdieKnöpfe.Wennein
Knopfloseist,nehmen Sieihnab
oder nähen Sie ihn fest, denn er
könntebeimWaschenabspringen.
So können Sie die gängigsten Flecken entfernen:
Tinte und Kugelschreiber: Betupfen Sie den Fleck mit einem Wattebausch, den Sie mit Methylalkohol oder mit 90°igem Alkohol
getränkthaben.
Teer: Betupfen Sie den Fleck mit frischer Butter, danach fahren Sie mit Terpentin darüber und waschen das Ganze dann sofort aus.
Wachs: Schaben Sie erst das feste Wachs ab und legen Sie dann den Fleck zwischen zwei Löschblätter: nun bügeln Sie mit dem heißen
Bügeleisen darüber. Daraufhin wischen Sie den Fleck noch mit einem Wattebausch mit Farblösungsmittel oder mit Methylalkohol ab.
Kaugummi: Reiben Sie den Kaugummi mit Nagellackentferner ab und trocknen Sie das Ganze dann mit einem sauberen Lappen nach.
Schimmel: Baumwolle und weißes Leinengewebe geben Sie in eine Lösung von 5 Teilen Wasser, einem Teil Bleichmittel und einem
Esslöffel Essig, danach sofort auswaschen. Für alle übrigen weißen Gewebe verwenden Sie Wasserstoffperoxyd (1:10) und waschen
daraufhin sofort das Gewebe aus.
Lippenstift: Reiben Sie den Fleck mit Äther ab, wenn es sich um Wolle oder Baumwolle handelt. Bei Seide verwenden Sie
Trichloräthylen.
Nagellack: Legen Sie das Gewebe mit dem Fleck nach unten auf ein Löschblatt, tränken Sie das Ganze mit Nagellackentferner und
verschieben Sie den Fleck stets, wenn sich das Löschpapier färbt.
Gras: Betupfen Sie den Fleck mit einem Wattebausch, den Sie mit Methylalkohol getränkt haben.
Wie setzen Sie Ihre
WaschmaschineinBetrieb?
Es ist wichtig, dass Sie Ihre
WaschmaschinerichtiginBetrieb
nehmen, und zwar nicht nur, um
eine gute Waschqualität zu
garantieren, sondern auch um
ProblemeamGerätzuvermeiden
undsomitseineLebensdauerzu
verlängern. Nachdem Sie die
Wäsche, das Waschpulver und
eventuelle Zusätze in den
Waschvollautomaten gegeben
haben,kontrollierenSiestets,ob
1.dieTürgutgeschlossenist.
2. der Stecker in der Steckdose
ist.
3.derWasserhahn auf ist.
4.sich derSchalter A aufeinem
der Zeichen (Stop/Reset)
befindet.
Das Programm auswählen
Das Programm wird nach dem
Wäschetyp, dem Schmutzgrad und
derMengeausgewählt.Umdasrichtige
Programmauszuwählen,sieheTabelle
auf Seite 18. Drehen Sie den
ProgrammwählerAbisdasgewählte
Programmmitdemauf demoberen
Rand des Drehknopfs befindlichen
Zeigerübereinstimmt, stellenSiemit
der Programmierscheibe Bdie
Temperaturein,stellenSiesicher,dass
sichderSchalterCaufdervonIhnen
gewünschten Einstellung befindet,
drückenSiegegebenenfallsdieTasten
E,F,undG,unddrückenSiedaraufhin
dieEIN/AUS-TasteH(EinstellungI).
Nachdem Sie den Waschvollautomaten installiert haben, führen Sie den ersten
Waschvorgang mit Programm "1" und bei 90° C durch.
Für Feinwäsche: Geben
Sie Ihre Unterwäsche,
Damenstrümpfe und
andere Feinwäsche in ein
Stoffsäckchen, um sie zu
schützen.
Die Wäschestücke nach
Gewebe, Farbe und
Flusenbildung zu trennen,
ist ein wichtiger Schritt,
um gute Waschergebnisse
zu erzielen.
Am Ende desWaschganges
Warten Sie, bis die
Anzeigeleuchte L erlischt: das
dauertca.dreiMinutenlang.
Dann schalten Sie Ihre
Waschmaschineaus,indemSie
die EIN/AUS-Taste H drücken,
so dass sie auf Osteht. Nun
könnenSie dieTürohne Gefahr
öffnen.Lassen SiedieTürimmer
einen Spalt weit offen stehen,
nachdem Sie die Wäsche
herausgenommen haben, so
dass die Feuchtigkeit, die sich
DieWäscheetiketten
verratenIhnen alles.
Kontrollieren Sie stets die
Wäscheetiketten: hieraus
gehen alle Informationen zum
Wäsche- oder Kleidungsstück
hervor, auch wie es am besten
gewaschen wird.
Auf Seite 19 wird die „Geheim-
sprache"allerWäscheetiketten
entschlüsselt.DieAngaben, die
Sie dort finden, sind überaus
nützlich, um Ihre Wäsche ma-
terialgerecht zu waschen und
lange Ihre Freude daran zu
haben.
Gleichmäßige
Gewichtsverteilung.
DieserWaschvollautomatistmit
einer speziellen elektronisch
gesteuertenVorrichtungausge-
stattet, wodurch das Gewicht
der Wäsche stets gleichmäßig
verteilt wird: vor dem
Schleudern sorgt diese
Vorrichtung dafür, dass die
Wäsche so gleichmäßig wie
möglich in derWäschetrommel
angeordnet wird, natürlich
immer so weit es derWäsche-
typunddieanfänglicheLagege-
statten.Dies istauch derGrund
dafür,weshalbdieseWaschma-
schineauch bei höchsterDreh-
zahlnicht vibriert und somitäu-
ßerst geräuscharm ist.
angesammelt hat, verdunsten
kann.
Schließen Sie stets den
Wasserhahn.
Hinweis: Falls es zu einem
Stromausfall kommt oder die
Waschmaschinewährend des
Waschganges abgeschaltet
wird, bleibt das ausgewählte
Programm gespeichert.

E
A
B
C
D
FGHIL
DerWaschvollautomatistaußer-
demmiteinerzusätzlichenKam-
mer4 (alsBeipack)fürBleichmit-
telausgestattet,dieindieKammer
1eingesetztwerdenkann.
Bügelfreundlich
Wird diese Funktion abgerufen,
wird Ihre Wäsche knitterfrei
gewaschen, und ist somit
einfacherzubügeln.
Diese Funktion kann zu den
Programmen 3-4 (Baumwolle),
5-6 (Kunstfasern) und 8-9
(Feinwäsche) hinzugeschaltet
werden.
Wird sie zu den Programmen
5-6-8-9hinzugeschaltet,wirddas
Waschprogramm auf dem
Symbol angehalten, durch
erneutes Drücken der Taste E
wirddas Programmfortgesetzt.
Wichtig: Diese Funktion darf
nicht eingestellt bzw. abgerufen
werden,wenndieFleckenstopp-
Taste Ggedrückt ist.
Kurzwäsche
Diese ermöglicht Ihnen, für die
kurzeWäschezwischendurch,die
DauerdesWaschprogrammsum
30% zu kürzen. Dies gilt nicht für
dieSpezialprogramme(sieheSeite
18)unddiefürWolleundSeide.
Fleckenstopp(s.Seite 21)
Wird diese Funktion abgerufen,
wäscht Ihre Waschmaschine
ganzbesondersintensiv,zurOpti-
mierungderWirkungderflüssigen
Zusätze, wodurch auch die hart-
näckigstenFleckenbeseitigtwer-
den.Wird dieFleckenstopp-Taste
gedrückt, kann die Funktion
Vorwäschenichtaktiviertwerden.
Hier bestimmen Sie
MachenSie sich mit derSchalterblende vertraut
Die Wahl des geeigneten Programms ist absolut wichtig -
und leicht.
Programmierscheibe
Mit diesem wählen Sie das
Waschprogramm.
DrehenSiediesen Knebel bitte
nurimUhrzeigersinn.
Zur Wahl der Programme ist der
auf dem Drehknopf befindliche
Zeiger mit dem Symbol bzw.der
Nummer des entsprechenden,
gewünschten Programmes in
Übereinstimmung zu bringen.
Drücken Sie daraufhin die EIN/
AUS-Taste H(Einstellung I), die
Anzeigeleuchte Iblinkt. Nach
5"(sec.), d.h. nachdem die
Einstellungakzeptiertwurde,stellt
dieAnzeigeleuchteIihrBlinkenein
(sie bleibt jedoch eingeschaltet)
und der Waschgang startet.
Möchten Sie das laufende
Programmunterbrechenoderein
neueseinstellen,wählenSieeines
der Symbole (Stop/Reset) und
warten Sie bitte 5"(sec.): Das
BlinkenderKontrolleuchteIistein
Zeichendafür,dassdasLöschen
desProgrammsakzeptiertwurde,
nun können Sie Ihren
Waschvollautomatenausschalten.
Im Anschluss einer Wasch-
programm-Wahlundentsprechen-
derAnnahmeseitensdesWasch-
vollautomaten hat jegliches Dre-
hendiesesKnopfes(mitAusnah-
mederEinstellung Stop/Reset)
keinen Einfluss mehr auf das
Waschprogramm.
Temperatur-
Programmierscheibe
Mit dieser werden die entspre-
chenden,inderProgramm-Tabel-
le empfohlenen Wasch-
temperaturen (auch ein Kalt-
waschprogramm)eingestellt( ).
Schleudertouren-
Programmierscheibe
MitdieserkanndieSchleuderganz
ausgeschlossen werden (wählen
Sie hierzu das entsprechende
Symbol ), oder die Schleuder-
tourenfüreingewähltesProgramm
herabgesetztwerden.Diefürdie4
Gewebearten vorgesehenen
Spitzenschleudertouren sind
folgende:
Gewebe Schleudertouren
Baumwolle 1200 U/min
Kunstfaser 800 U/min
Wolle 600 U/min
Seide nicht schleudern
Ein Sanftanlauf und eine
Unwuchtüberwachung sorgen
dafür, dass die Wäsche dabei
ganzpflegeleichtbehandeltwird.
Waschmittelschublade
Dieseistin3Kammernunterteilt:
1.WaschmittelfürdieVorwäsche;
2.WaschmittelfürdenHaupt-
waschgang;
3.Weichspüler.
Der Reinigerbehälter mit der
Kammer für Bleichmittelzusätze
befindet sich hier.
17 Installations- und Bedienungsanleitungen
EIN/AUS
Befindet sich dieTaste Heinge-
drückt, ist IhrWaschvollautomat
eingeschaltet,istdiese nichtge-
drückt, ist IhrWaschvollautomat
ausgeschaltet.
Ein Ausschalten des Geräts
bewirkt kein Löschen des ge-
wähltenProgramms.
EIN/AUS-Anzeigeleuchte
Bei eingeschaltetem Gerät
blinkt die Anzeigeleuchte I, und
wartet auf Eingabe eines Pro-
grammes. Ein Umschalten auf
feststehendes Licht bedeutet,
dass das eingegebene Pro-
gramm akzeptiert wurde.
Türsicherungs-Anzeige-
leuchte
DurchLeuchtendieserLed-Anzei-
gemeldetdasGerät,dassdieTür
blockiert ist, um ein versehentli-
chesÖffnenzuvermeiden.Warten
Sie bitte, dass diese Leuchte er-
lischt(ungefähr3Minuten),bevor
SiedieTüröffnen,umSchädenan
dieserVorrichtungauszuschließen.
MAX
12
4
3