iNels Connection server User manual

Connection server
User manual 3.265
2017

Table of Contents
Connection server - User manual 3.265 ...................................................................................................1
Connection server EN ...............................................................................................................................4
Get started .................................................................................................................................................5
3.0 Settings iMM Control Center iMM Server ...........................................................................................6
Bookmark Server .................................................................................................................................7
iMM servers management .............................................................................................................8
Bookmark Configuration ......................................................................................................................9
Settings ........................................................................................................................................10
Upload or edit export.pub ............................................................................................................11
Bookmark System ..............................................................................................................................12
Network settings ..........................................................................................................................13
Shutdown server ..........................................................................................................................14
Restart server ..............................................................................................................................15
Restart server regulary ................................................................................................................16
NFS Server configuration ............................................................................................................17
Bookmark HA-BUS ............................................................................................................................18
iNELS3 .........................................................................................................................................20
KNX ..............................................................................................................................................21
KNX add actor to rooms .............................................................................................................22
KNX export group address ..........................................................................................................23
Bookmark RF Configuration ..............................................................................................................25
Settings ........................................................................................................................................26
Bookmark Zones ................................................................................................................................27
New zone .....................................................................................................................................28
Defined zones ........................................................................................................................29
No zone defined ..........................................................................................................................30
Bookmark Houses .............................................................................................................................31
Scene ...........................................................................................................................................32
Edit enterHouse or exitHouse ...............................................................................................33
Bookmark Security Scan ...................................................................................................................34
Trigger ralays ...............................................................................................................................35
Notify me if device obtains folowing state ...................................................................................36
Bookmark EventScript .......................................................................................................................37
Trigger Rules ...............................................................................................................................38
Bookmark A/C ....................................................................................................................................39
LG Clims ......................................................................................................................................41
CoolMaster ...................................................................................................................................42
Air Pohoda ...................................................................................................................................44
Atrea .............................................................................................................................................45
Universal 0-10V ...........................................................................................................................46
Bookmark Rooms ..............................................................................................................................47
New room ....................................................................................................................................48
List Rooms ...................................................................................................................................49
Edit .........................................................................................................................................50
Rename ..................................................................................................................................52
Bookmark Cameras ...........................................................................................................................53
New camera .................................................................................................................................54
Select the stream ..................................................................................................................56
No camera defined ......................................................................................................................57
List of cameras ............................................................................................................................58

Bookmark Miele .................................................................................................................................59
Miele .............................................................................................................................................60
Bookmark Intercoms ..........................................................................................................................61
2N settings ...................................................................................................................................63
New intercom account .................................................................................................................64
Update of asterisk settings ..........................................................................................................65
Intercom accounts .......................................................................................................................66
Bookmark Energy ..............................................................................................................................67
Energy management ...................................................................................................................72
Create counter IDM3 .............................................................................................................74
Bookmark Giom .................................................................................................................................77
Giom scene ..................................................................................................................................79
Edit .........................................................................................................................................80
Bookmark Manual ..............................................................................................................................81
Manual .........................................................................................................................................82
Bookmark Default Settings ................................................................................................................83
Reset all server settings to default .............................................................................................84
Reset all devices dependencies to default .................................................................................85
Bookmark Audit .................................................................................................................................86
Logged events .............................................................................................................................87
Others ................................................................................................................................................88
Control 4 ......................................................................................................................................89

Connection server EN
Connection server
Connection between iNELS BUS system units and another devices.
Connection Server - It serves as a connection between iNELS BUS system units and another devices because
it allows communication between devices with different protocols. All devices can be then controlled through just
one application. Besides common controlling of electro-installation, you can also control e.g. air condition, home
appliances.
Connection server uses small but powerful computer Raspberry Pi with really low consumption with Linux operating
system.
In comparison with iMM Server, multimedia is not implemented here.
Protocols
RPC - communication with application smartphones and tablets
Elkonet - communication with central unit iNELS BUS
Miele - communication with home appliances Miele
Camcontrol - communication with IP cams
Artea - communication with air handling unit Atrea
Coolmaster - communication with gateway for air conditioning
Airpohoda - communication with air handling Airpohoda
eLAN-RF - communication with wireless components iNELS RF Control

Get started
Commands are given in purple, e.g.: sudo reboot
Notice are given in orange: Connection server support set only one door
intercom.
Tips and tricks are given in green: In list we can add and remove elements manually
Important application configuration commands in Linux (are entered in terminal):
ifconfig - finding IP address of station/server, similar to ipconfig in Windows
mount - command for connection of certain device (CD-ROM, network drive, etc.)
umount - command for disconnection of certain device
man - command is used to format and display the man page for example. man mount
sudo shutdown now - command shut down device Connection server from teminal
sudo reboot - command reboot device Connection server from teminal
Putting Connection Server in run
a) Once you unpack Connection server, let the device stabilize at room temperature.
b) Insert attached SD card in the slot.
c) Connect the cabling (do not connect the supply yet):
Display HDMI device
LAN cable for ethernet port
Keyboard to USB port
d) After connecting power suply (adapter with micro USB connector) Connection Server will start
automatically.
e) When starting the system you can watch opening of individual services on the screen. Some services
do not open, and display FAILD in red; in majority of cases it is not a problem; and has no influence
whats over on the run of Connection Server.
f) When start of services is completed, only one line requiring login name will appear on the screen.
Login: imm
Password: imm123
No characters display when writing a password in terminal
g) To find IP address after signup use command ifconfig
h) Further settings are performed via web interface iMM Control Center. And display device or keyboard
need not be connected for the rest of time. Power supply, micro SD card with system and application
and connection to network is sufficient to run Connection Server.
Never insert or remove the micro SD card for running Server Connection

3.0 Settings iMM Control Center iMM Server
<TOD 3.0 Configuration in iMM Control Center - Connection Server
IMM Control Center (the "iMM CC" hereinafter ) is web interface serving for settings iMM clients and iMM
servers. iMM CC is activated upon entering the address http://IPADDRESS:8080 in your internet browser.
Login by your password in factory installation is default: "admin", password "imm123"
If iMM CC does not open, connect via ssh to Connection server and enter type folowing in
command: sudo /etc/init.d/imm-web admin restart .
SSH authorization Login: imm
Password: imm123
If you can change Default password in terminal: passwd imm n't
Putty is free software whitch can be used to make an SSH connection to iMM CC in windows platform
Website iMM CC will be automatic logout for inactivity after 15 minutes.

Bookmark Server
Bookmark Server
In bookmark Server you can control virtual servers (services), which are necessary for comunication with
third party. For software diagnostic is possible each virtual server check status, stop or enforce run service.
All virtual servers you can control via Supervisor service link http://IPADDRESS:9001

iMM servers management
iMM servers management
In menu iMM servers management we can control the virtual servers running on the server via a web
interface. For software diagnostic is possible each virtual server check status, stop or enforce run service.
All virtual servers you can control via Supervisor service link http://IPADDRESS:9001

Bookmark Configuration
Bookmark Configuration
In bookmark Configuration is main settings impotrant for propertly function device Connection server.
Machine ID and Licence key are preset in factory default.
IP address format:
If central unit is behind the NAT or in the other network and routers is possible use port forwarding. You can set port
forwarded (on router) to comunication port central unit (CU2 port 61682 ,CU3 port 9999).
Version CU Format Example:
CU2 [IPADDRESS]:[COMUNICATION_PORT] 10.5.15.12:8454
CU3 [IPADDRESS]:[HTTP_PORT]:[COMUNICATION_PORT] 10.5.15.12:8080:4562
Communication port - Elkonet for iMM server, Connection server, App iHC
HTTP port - is webserver CU3 with save file export.imm usually http://IPADDRESS/immfiles/export.imm
ASCI port - port for comunication CU3 using third-party protocol (telnet) for proper function you must
set first port in IDM software (optional)
Password - password for acces and control central unit set in IDM software (optional)
Example setup menu settings:

Settings
Settings
In the section Settings is main settings for setup Connection server whitch are IP address Central unit,
server, password and ASCII port. Machine ID and Licence key are preset in factory default.
IP address format:
If central unit is behind the NAT or in the other network and routers is possible use port forwarding. You can set
port forwarded (on router) to comunication port central unit (CU2 port 61682 ,CU3 port 9999).
Version CU Format Example:
CU2 [IPADDRESS]:[COMUNICATION_PORT] 10.5.15.12:8454
CU3 [IPADDRESS]:[HTTP_PORT]:[COMUNICATION_PORT] 10.5.15.12:8080:4562
Communication port - Elkonet for iMM server, Connection server, App iHC
HTTP port - is webserver CU3 with save file export.imm usually http://IPADDRESS/immfiles/export.imm
ASCI port - port for comunication CU3 using third-party protocol (telnet) for proper function you must
set first port in IDM software (optional)
Password - password for acces and control central unit set in IDM software (optional)
Example setup menu settings:

Upload or edit export.pub
Upload or edit export.pub
In the section Upload or edit export.pub you can upload export.pub file from softare IDM to Connection
server and manual edit elements in web browser.
Function for upload export.pub is only for central unit iNELS 2
In the central unit iNELS3 will dowload export automatically when you press Load iNELS 3 export button.
In list we can add and remove elements manually

Bookmark System
Bookmark System
In bookmark System you can configure additional, network settings which will be stored on static
IP address. We recommend setting a static IP address for Connection server.
Shutdown - turn off Connection server
Restart server - reboot Connection server
Restart server regulary - schedule restart server at a specified time in a week
NFS Server Configuration - update share settings for Connection server

Network settings
Network settings
In the section Network settings you can set IP address manualy as static or dynamically allocate
by DHCP server.
Example setup static IP addres:
Set static IP address is recommended for stable use. Information about network settings IP address, link
If you are using a dynamic IP address from DHCP server set the router to allocate always the same IP addresses
based on MAC addresses.

Shutdown server
Shutdown server
Press down Shutdown button to power off Connection server from a web interface.
For another turn on plug in power connector to Connection server

Restart server
Restart server
Press down the Reset button to restart Connection server from a web interface.

Restart server regulary
Restart server regulary
In the section Restart server regulary we can setup scheduled restart the server at a specified time in
a week.
Example settings restart server in monday six minut after the midnight.

NFS Server configuration
NFS Server configuration
Press down Update button to refresh NFS sharing settings in the file /etc/fstab. from a web interface.

Bookmark HA-BUS
Bookmark HA-BUS
In bookmark HA-BUS we can used for interconnection iNELS3 BUS and decentralized control system
KNX/EIB, which allows control from iHC app.
Second function to add more iNELS3 central unit.
Requirements for connect with KNX/EIB: Central unit iNELS or more
Router KNX
Export group address from program ETS3 - 5
Example connection with iNELS3 CU:
First, enter the IP address of the central unit iNELS3 next fill password (optional) and note to finish press down button
Add. After saving the settings will download export from central unit and elements will be added prefix "inels3" last
letter (A-H) identify rank.
Fill IP address KNX router and Save button. After save settings was performed put export file group address
(see. KNX export group address) and load export to system. Now you can check bookmark Configuration whether
the excerpt elements KNX, If yes you go to the tab Rooms and put in a selected room features KNX.

Example add device KNX to rooms in bookmark Rooms:
This manual does not describe the setting elements KNX only link two systems among themselves.

iNELS3
iNELS3
First, enter the IP address of the central unit iNELS3 and Add. After saving the settings will
download export from central unit and elements will be added prefix "inels3" last letter (A-H) identify rank.
The prefix consists of two parts first one is "inels3" and second "A" (last char A-H) distinguishes, letter central unit
between themselves.
For correct function with KNX/EIB would have filled a part of the KNX.
If the central unit does not have a password set, Password field will be empty.
Names without prefix in rooms will be converted automatically.
For last hardware revision Raspberry Pi 2 is possible add up to 8 pcs INELS3 central unit.