Infinity INTERLUDE IL40 User manual

Technical Manual
Interlude IL40
Infinity Systems, Inc. 250 Crossways Park Dr., Woodbury, New York 11797 Rev1 04/03
NETWORK, IL40
336241-001
+IN
-IN
GRN
GRN/BLK
+
-
+
L1
2.5mH
C1
120 F
R2
3.3 ohm C4
6.8 F
60.0 F
C2
L5
0.07mH
YEL
-
+
YEL/BLK
335225-003
L.F.
H.F.
00195
IL40 SCHEMATIC
100V
20W 100V
100V
TRANSDUCER
HIGH FREQUENCY
.250
.187
.110
GRN
GRN/BLK
MIDRANGE FREQUENCY
335812-002
TRANSDUCER
-
+
-
.205
1.65mH
L2
R1
4.2 ohm
20W
2.70mH
L3
0.45mH
L4
C3
14.0 F
100V
-IN
+IN
WHT/BLK
WHT
.205
.250
M.F.
+
-
TRANSDUCER
335804-001
LOW FREQUENCY
HF
LF
WHT/BLK
WHT
YEL/BLK
YEL
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
lNominal Impedance: 89
lMax Amp Power 75 watts*
lFrequency Response 38 Hz - 22,000Hz (E3dB)
lSensitivity: 89dB (2.83V @ meter)
lCrossover Frequency: 600, 2500Hz 24dB/octave
SYSTEM COMPONENTS:
lCabinet IL40 (Not for Sale)
lGrille, (Platinum) 336057-001
lLow-Frequency Transducer: 8” (203mm) C.M.M.D.,
shielded (335804-00 )
DC Resistance 4.6 ohms E0%
lMidrange-Frequency Transducer: 4.5” ( 4mm) C.M.M.D.,
shielded (3358 2-002)
DC Resistance 4.6 ohms E0%
lHigh-Frequency Transducer: ” (25mm) C.M.M.D.,
shielded (335225-003)
DC Resistance 3.5 ohms E0%
lCrossover Network 33624 -00
AURAL SWEEP TEST SPECIFICATIONS:
lSystem Aural Sweep Test 6.0V Input 30 Hz to 22 kHz
lL.F. Aural Sweep Test 6.0V Input 30 Hz to kHz
lM.F. Aural Sweep Test 3.0V Input 500 Hz to 3 kHz
lH.F. Aural Sweep Test 3.0V Input 2 kHz to 22 kHz
PHYSICAL SPECIFICATIONS:
lEnclosure dimensions: 40” x 0” x - /2”
( 0 .6cm x 25.4cm x 29.2cm)
lWeight 4 lbs ( 8.6 kg) Each
WARRANTY:
lRefer to Warranty Statement packed with each product.
* The maximum recommended amplifier power rating will
ensure proper system headroom to allow for occasional peaks.
We do not recommend sustained operation at these maximum
power levels.
PACKING WIRING DIAGRAM
INTERLUDE IL40

Technical Manual
Interlude IL40
Infinity Systems, Inc. 250 Crossways Park Dr., Woodbury, New York 11797 Rev1 04/03
EXPLODED VIEW
ROTATED
00193
CABNET IL40
(NOT FOR SALE)
CUP, ISOLATION
335809-001
SCREW, (4)
#6-19X.375 BLK
905401-006
SCREW, (8)
#8-X.75 BLK
900101-012
SCREW, (4)
PB,PPH, #6X.75 BLK
903401-012
SCREW, (8)
PB,PPH, #6X.75 BLK
903401-012
MID-RANGE
335812-002
SCREW, (8)
PB,PPH, #6X.75 BLK
903401-012
TWEETER
335225-003
WOOFER
335804-001
GRILLE CUP (8)
333249-003
SCREW, (4)
NETWORK ASSY
336241-001
BUMP-ON (4)
330104-001 PEDESTAL
335780-001
PORT TUBE
336055-001
TO SERVICE THE INTERLUDE IL40
1) Remove the grille.
2) Extract all (8) rubber grille retainers; this can be accomplished by carefully pulling them out
of their cavities with long-nosed pliers or similar tool.
3) Remove the (8) Phillip screws that are now exposed.
4) Carefully lift the front baffle, with tweeter attached, off the cabinet.
5) If necessary, remove the (8) Phillips screws holding the woofer to the cabinet.
SHORTING STRAPS (2)
073-110002-000
FRONT BAFFLE
336028-001
#8-X.75 BLK
900101-012
GRILLE, WARM GRAY, 336057-001
GRILLE, MIDNIGHT BLUE, 336057-002
GRILLE, RICH BURGUNDY, 336057-003
INTERLUDE IL40
GRILLE, BLACK, 336057-004