influencer INBAPOP User manual

MICROPHONE
BOOMARM KIT
INBAPOP
SPECIFICATIONS
• Scissor suspension
• Pop filter
• Clamp desk mount
• Microphone mount
Welcome to the #influencer
Microphone Boomarm Kit. Let’s
get you up to speed so you can
start creating great content!

1711/
3
Influencer™
PO Box 5658 Brendale QLD
Australia 4500
Customer Support 1800 812 261
MOUNTING VIA THE DESK CLAMP
1. Unscrew the clamp so that the opening is large enough to fit over the edge
of your table.
2. Push the clamp all the way onto the table edge for maximum security.
3. Fasten the clamp to the desk by turning the handle so that it is tight against
the underside of the table. Note: Make sure that the clamp sits flush on both
the top and bottom surfaces of the table.
4. Test that you have mounted the clamp securely by seeing if you can pull it off
the edge of the table. Tables with round edges provide less security than
those with square edges.
5. Insert the arm into the hole at the top of the clamp.
ATTACHING THE MICROPHONE MOUNT
1. Install the microphone holder by screwing clockwise onto the attachment
thread of the boom arm.
2. Insert microphone into the holder until secure.
ATTACHING THE POP FILTER
1. Attach the pop filter bracket to the top metal arm.
2. Tighten the adjustment screw on the bracket until firm.
3. Bend pop filter into desired location. (Must be between microphone and noise
source).
13
4
2