InFocus Secure Digital (SD) & Memory Stick User manual

1
Presenter-to-Go™
Secure Digital (SD)
&
Memory Stick (MS)
User’s Guide
Includes Instructions For:
• Presenter-to-Go Palm OS Presentation Application with File Creation
Support on Windows 98, Millennium, 2000, XP, NT4 and Mac OS 9.
• MARGI Mirror Palm OS Graphics Display Application.
MARGI Systems, Inc. •Fremont, CA 94538 •www.margi.com
Presenter-to-Go SD is
compatible with all SD-enabled
Palm handhelds
Presenter-to-Go MS is
compatible with all MS-enabled
Sony CLIE handhelds

2
Table of Contents
1. Introduction .........................................................................4
Your Product Packaging Contains: .........................................4
2. System Requirements ...........................................................5
Handheld ...........................................................................5
Desktop or Laptop...............................................................5
Display Device....................................................................5
3. PC & Palm Installation/Setup ..................................................5
Installing the Presenter-to-Go PC Creation Software. ...............5
Un-Installing the PC Creation Software...................................7
Installing the Presenter-to-Go & MARGI Mirror Palm software on
your handheld immediately after PC software installation..........7
Transfer Tutorial Presentation to Handheld .............................9
Installing the Presenter-to-Go & MARGI Mirror Palm software on
your handheld from the Presenter-to-Go desktop. ...................9
4. Creating Your Presentation................................................... 10
Creating Presentations from within Microsoft PowerPoint on your
desktop PC (or laptop):...................................................... 10
Creating Presentations from Windows Applications with Printer
Support:.......................................................................... 14
5. Software Installation/Setup on Mac ....................................... 16
Installing the Presenter-to-Go Creation Software. .................. 16
Un-Installing the Presenter-to-Go Creation Software. ............. 16
Installing the Presenter-to-Go & MARGI Mirror Palm software on
your handheld. ................................................................. 16
6. Creating Your Presentation on a Mac .....................................16
Creating Presentations from within Microsoft PowerPoint on your
desktop (or laptop): ......................................................... 17
Creating Presentations from Applications with Printer Support: 21
7. Bringing the Presentation into your Palm................................ 22
The HotSync™ Process: ..................................................... 22
8. Using Presenter-to-Go ......................................................... 23
Splash and Presentation Screen .......................................... 23
Module Status .................................................................. 24
Resolution and Refresh Rate Selection .................................24
Show, or Hide slides .......................................................... 24
Viewing Notes and Slide Text Content .................................. 25
Viewing Slide Thumbnails................................................... 26
Drag & Drop Reorganization ............................................... 27
Switching between Presentations ........................................27
Managing Presentations on a Memory Card........................... 27
Menu: Tools ..................................................................... 28
MOVE function.................................................................. 29
COPY function................................................................... 29
DELETE function ............................................................... 30
Beaming Files to other Palm Handhelds ................................ 30

3
Menu: Show ..................................................................... 31
Hide All, Show All.............................................................. 31
Reset Order ..................................................................... 31
Auto Advance ................................................................... 31
Menu: Options.................................................................. 32
Preferences ...................................................................... 32
About .............................................................................. 33
Making a Presentation ....................................................... 33
Showing a slide ................................................................ 33
First Show Page ................................................................ 33
Displaying Notes while making Presentations ................ 33
Remote Control Operation .................................................. 33
9. Getting the Most out of your Presenter-to-Go Presentation (Power
User Tips) .............................................................................34
Making Mobile Presentations look good ................................ 34
Creating a Mobile Presentations from multiple applications...... 34
Making Effective Presentations from your Handheld Efficiently . 35
Making presentations when standing away ................... 35
Reviewing Notes and Slide Text Content while Making
Presentations- the Cheat Sheet...................................35
10. MARGI Mirror Introduction..................................................36
11. Using MARGI Mirror ........................................................... 36
Video .............................................................................. 37
Zoom .............................................................................. 37
Update ............................................................................ 38
Percentage of CPU Used............................................. 38
Color Scheme ................................................................... 38
Resolution and Refresh Rate Selection .................................39
Using MARGI Mirror with an External Keyboard ..................... 40
12. Troubleshooting ................................................................ 40
Frequently Asked Questions................................................ 40
Technical Support ............................................................. 43
13. Specifications ................................................................... 44
Appendix One: Product Warranty ............................................. 45
Appendix Two: Federal Communications Commission Information 46
Warranty Registration........................................................ 46
© 2002 MARGI Systems, Inc. MARGI, MARGI Mirror, the MARGI logo, and Presenter-to-Go are all
trademarks of MARGI Systems, Inc. PowerPoint is a registered trademark of Microsoft Corporation.
HotSync & Palm are trademarks or registered trademarks of Palm, Inc. Credits: The digital
projector picture is provided by InFocus. All rights reserved. Specifications are subject to change
without notice. All other trademarks and registries are the property of their respective owners.
Specifications and any errors in this manual are subject to change without notice. The Part Number
of this manual is 70-2415 Rev. E
Presenter-to-Go is subject to U.S. and other international patents pending.

4
1. Introduction
Thank you for purchasing Presenter-to-Go™by MARGI Systems™. Presenter-to-Go is
available as a Secure Digital (SD) Card for Palm’s® line of personal assistants and a
Memory Stick™(MS) for Sony™CLIE™handhelds. It comes with two Palm applications
that allow the Palm to be used as a presentation tool in two distinctly different ways:
1. Using “Presenter-to-Go” PC software and its associated Palm application, a user can
compress and load images from PowerPoint®(and other printable documents) from a PC
or MAC into the Palm handheld using the HotSync process. The user can then carry their
handheld to the presentation, connect to a digital projector (or VGA display) and make
1024 x 768 color presentations without the need for a laptop computer. The Presenter-
to-Go application is supported on Windows 98 and 2000, Millennium, XP, NT4 and
Macintosh OS 8.5 – 9.2 operating platforms.
2. Using the “MARGI Mirror” Palm OS application and the Presenter-to-Go card, a Palm
user can connect to a digital projector (or a VGA display) and display the contents of the
Palm’s LCD at 1 - 4X multiples of 160 x 160 regardless of the application it is running.
MARGI Mirror and the Presenter-to-Go card act like a graphics output card for the
handheld. It is even possible to attach a keyboard, run word processing software, and
see the output on the display as one type on the keyboard. Color graphics are supported
when using color models. Information on MARGI Mirror starts in Section 10 of this
manual.
This guide contains information on installation and use of both the “Presenter-to-Go” and
the “MARGI Mirror” applications. Downloadable updates and information are posted on
the MARGI web site, http://www.margi.com/ under Support.
Your Product Packaging Contains:
1) Presenter-to-Go™Card/Cable with power port
2) A/C Adapter
3) Remote Control
4) Presenter-to-Go Installation CD.
5) MARGI Mirror™& Presenter-to-Go Palm applications
6) Projector connection cable
7) Quickstart Card

5
2. System Requirements
In order to completely create and display presentations using Presenter-to-Go it is
necessary to have a Palm or Sony handheld, a desktop or laptop computer, and a display
device. The corresponding system requirements are listed below:
Handheld
• A Palm handheld with Palm OS 4.0 (or higher) and SD support or a Sony
CLIE handheld with Palm OS 4.0 (or higher) and MS support.
Desktop or Laptop
• 32 MB RAM
• 50 MB Hard Drive
• Windows®98, 98SE, Millennium, 2000, XP, NT4 or Mac OS 8.5-9.2 Operating
System
• Presenter-to-Go Toolbar Plug-in support for Microsoft PowerPoint®97, 2000
& XP and Mac 98 and 2001 versions.
• A cradle and Palm Desktop software loaded.
Display Device
• Any Display Device with HD-15 (VGA) connector and support for 1024 x 768
or 800x600 resolution. This includes most CRT monitors and most graphics
projectors.
3. PC & Handheld Installation/Setup
Installing the Presenter-to-Go PC Creation Software.
Check that your PC meets the System Requirements for operating system and hardware
requirements described in Sections 2. Run SETUP on the Presenter-to-Go CD to install the
Presenter-to-Go presentation creation software (and the PowerPoint Add-in.) on your PC.
The SETUP program may auto-run on some systems.
Presenter-to-Go will install into a default folder under Program Files. If you wish to install
the software elsewhere, you may do so at this point in the installation process.

6
Fig. 3.1: Selection of Software Installation Destination
You will then get the following message at the end of the installation. If you wish to
register the product at this time, click “Next”. If you do not wish to register the product
at this time, simply uncheck the box below and then click “Next”.
Fig. 3.2: Setup Product Registration

7
Fig. 3.3: Setup Complete
Click “Finish” and, if registration was selected, you will be brought to the Presenter-to-Go
registration page through your internet browser.
Un-Installing the PC Creation Software.
When updating PC software versions, it is recommended that you remove the old PC
creation application software prior to installing the new version. This can be done by
following the procedure below:
1. Go to Settings/Control Panel/Add/Remove Programs
2. Scroll and highlight MARGI Presenter-to-Go
3. Press the ADD/REMOVE button.
4. Confirm file Deletion by selecting YES
5. The Un-Install Shield will uninstall the program. Answer YES if it asks if you want
to remove any no longer used files with the MARGI as part of the name.
6. Un-Install is now complete.
Installing the Presenter-to-Go & MARGI Mirror Palm software on
your handheld immediately after PC software installation.
Note: Do not insert the Presenter-to-Go card into your handheld until the Presenter-to-Go
Palm software has been installed.

8
Fig. 3.4: Installing the Handheld Application
After you click on the “Finish” button during the PC software install, the screen in Fig. 3.4
will appear. If you would like to install the Presenter-to-Go software on your handheld
during your next HotSync, click “Yes”.
Fig. 3.5: User List
The screen in Fig 3.5 will appear and provide you with a list of users whose devices you
may install the Presenter-to-Go Palm software on. Please add the user you wish to Sync
the software for using the “Add>>” button, and then click on “Close”.
Fig. 3.6: Install Application on Next HotSync
After you have selected your users, you will get the screen in Fig 3.6. After clicking on
“OK”, the Presenter-to-Go Desktop will launch itself.

9
Fig. 3.7: Presenter-to-Go Desktop
Transfer Tutorial Presentation to Handheld
Select the presentation “Palm_Tutorial.pdb” from the “Presentation List” and click
“Transfer”. Next time you HotSync “Palm_Tutorial” will be transferred to the handheld.
Installing the Presenter-to-Go & MARGI Mirror Palm software on
your handheld from the Presenter-to-Go desktop.
Click on the “Install App” button. You will then get the message in Fig. 3.6.
Click on “OK”. The next time you HotSync to your Palm, the three files shown in Fig. 3.8
will be transferred.

10
Fig. 3.8: Add/Remove Programs
Now, you’re ready to start making your mobile presentations
4. Creating Your Presentation
Presenter-to-Go presentations can be created directly from within Microsoft PowerPoint®
or from any Windows®application that has print driver support. The processes are
slightly different.
Creating Presentations from within Microsoft PowerPoint on your
desktop PC (or laptop):
The Presenter-to-Go driver provides a button icon on the PowerPoint toolbar
that looks like:
It is shown in Fig. 4.1, and can be found in the middle of the toolbar.