InFocus LP340 User manual

Install the Ceiling Mount Base Box
on the Ceiling
-NOTE -
Refer to the LiteMount False Ceiling Plate and
LiteMount Pipe Tubing Extension installation
instructions if you have purchased these items
to reinforce a suspended ceiling or to position
the projector away from the ceiling. Install
these items before proceeding with the
instructions below.
-IMPORTANT -
Use appropriate hardware to ensure that the
ceiling box is fastened securely to the ceiling.
No hardware is included for this purpose.
1. Examine the flanges on each side of
the ceiling mount base box to identify
its front and rear orientation on the
ceiling. The holes near the edge of
each flange will be closest to the rear
of the projector when the installation is
complete.
Attach the Mounting Bracket
to the projector
1. With the projector on its top, loosely
fasten the two quick release sleeves (E)
to the projector. Use the two 4mm x
16mm Phillips screws (D).
2. Position the mounting bracket (B) against
the projector with the keyholes over the
two screw heads (D). Move the bracket
toward the rear of the projector to fully
engage the screws in the narrow keyhole
slots.
3. Thread the 4mm x 10mm knurled knob
screw (A) through the mounting bracket
into the hole near the rear of the
projector.
4. Tighten all three screws securely.
Installation Instructions
SP-CEIL-LM3X
Ceiling Mount Kit for
LP340/350 Projectors
This kit makes it easy to hang your projector
from the ceiling for fixed installation use in
meeting, auditorium and training room
settings. A unique quick-release feature
allows you to take the projector down in
seconds to replace the lamp or move the
projector to another location.
-IMPORTANT -
Projector installation must be performed by
qualified personnel in compliance with local
building code requirements. These
requirements take precedence over any
instructions provided here.
Ensure that the ceiling is capable of
supporting a weight five times that of the
projector. If it cannot, reinforce the ceiling to
provide a safe installation.
Package Contents
§Installation instructions
§1 –4mm x 10mm knurled knob
screw
§1 –projector mounting bracket
§2 –4mm x 16mm Phillips screws
§2 –4mm quick release sleeves
§1 –ceiling mount base box
§2 –6mm x 12 mm hinge pin bolts
§2 –6mm x 12mm angle locking
bolts
§2 –6mm flat washers
§2 –conical spacers
1
2
!!
REAR SIDE
!!

4. Loosely thread the two 6mm x 12mm
angle locking bolts (H) through the
flanges on the projector mounting
bracket.
5. Adjust the rear of the projector up or
down to attain the desired projection
angle.
6. Tighten the angle locking bolts (H)
securely.
7. Tighten the hinge pin bolts (G) securely.
To Remove the Projector from the Ceiling
1. Remove the 4mm x 10mm knurled knob
screw (A) from the projector mounting
bracket.
2. Move the projector forward to disengage
the projector from the quick release
sleeves (E) on the mounting bracket.
3. Carefully lower the projector away from
the ceiling.
Install the Ceiling Mount Base Box
on the Ceiling (cont.)
2. Position the ceiling mount base box
against the ceiling surface at the
desired projector mounting location.
3. Mark the location of the four
mounting holes to be drilled in the
ceiling.
4. Remove the box from the ceiling.
5. Drill four holes to accommodate the
fasteners that attach the box to the
ceiling. No fasteners are included
for this purpose.
6. Fasten the ceiling mount base box
to the ceiling using hardware
appropriate for the purpose.
7. Ensure that all necessary cables to
the projector pass from the ceiling
and through the hole in the center of
the ceiling mount base box.
Hang the Projector on the Ceiling
1. Raise the projector to the ceiling
mount base box on the ceiling.
Ensure that the front of the projector
matches the front side of the ceiling
mount base box.
2. Align the flange slots on the
projector mounting bracket with the
holes in the sides of the ceiling
mount base box.
3. Loosely fasten the projector
mounting bracket to the ceiling
mount base box using the two 6mm
x 12mm hinge pin bolts (G) with
6mm flat washers (I) and conical
spacers (J).
2
3
Limited Warranty
InFocus Inc. warrants that each “ceiling mount” sold
hereunder will conform to and function in accordance with
the written specifications of InFocus. Said limited warranty
shall apply only to the first person or entity that purchases
the Product for personal or business use and not for the
purpose of distribution or resale. The product may contain
recycled components that are in new condition. Said
warranty shall continue for a period of one (1) year from the
date of such purchase.
Proof of purchase is required for
all warranty claims. InFocus does not warrant that the
Product will meet the specific requirements of the first
person or entity that purchases the Product for personal or
business use. InFocus’ liability for the breach of the
foregoing limited warranty is limited to the repair or
replacement of the Product or refund of the purchase price
of the Product, at InFocus’ sole option. To exercise the
Purchaser’s rights under the foregoing warranty, the Product
must be returned at the Purchaser’s sole cost and expe
nse,
to InFocus, and must be protected by packaging
comparable to the original packaging. The Product must be
accompanied by a written letter that includes (i) proof of
date of purchase, (ii) the dealer’s name, (iii) the part number
of the accessory item or the projector/panel model num
ber,
(iv) your business card information, (v) explanation of how
the item was damaged, and (vi) description of the damage
and reason for the return. Please call InFocus or your dealer
for information on where to send your case. InFocus will
repair/replace and return the case within 10 days of receipt
of the item.
Warranty Limitation and Exclusion
InFocus shall have no further obligation under the foregoing
limited warranty if the Product has been damaged due to
abuse, misuse, neglect, accident, unusual physical stress,
unauthorized modifications, tampering, alterations, or
service other than by InFocus, causes other than from
ordinary use or failure to properly use the Product in the
application for which said Product is intended.
Disclaimer of Unstated Warranties
The warranty printed above is the only warranty applicable
to this purchase. All other warranties, express or implied,
including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose are
disclaimed. There are no warranties that extend beyond the
face hereof and the foregoing warranty shall not be
extended, altered or varied except by written instrument
signed by InFocus.
Limitation of Liability
It is understood and agreed
that InFocus’ liability whether in
contract, in tort, under any warranty, in negligence or
otherwise shall not exceed the return of the amount of the
purchase price paid by purchaser and under no
circumstances shall InFocus be liable for special, indire
ct or
consequential damages or lost profits, lost revenues, or lost
savings. The price stated for the product is a consideration
in limiting InFocus’ liability. No action, regardless of form,
arising out of the agreement to purchase the product may
be brou
ght by purchaser more than one year after the cause
of action has accrued
27700B SW Parkway Ave.
Wilsonville, OR 97070
1-800-294-6400
www.infocus.com
2000 by InFocus Corp.
All rights reserved.
009-0537-00
009009--05370537--0000