Inner Balance Wellness Power ZG User manual

ZG-571
Owners’ Manual
Please read this Owners’ Manual thoroughly prior to using this product.
Johnson Health Tech.
North America
www. ib-wellness.com
INNER BALANCE WELLNESS
A Division of Johnson Health Tech, NA.
2690 Research Park Drive - Suite A - Fitchburg, WI 53711

Safety Instructions
Grounding Instructions
Important Safety Instructions
Proper Use of the Chair
Daily Maintenance of the Chair
Troubleshooting Guide
Components and Accessories
Setup Instructions
Moving the Chair Around
Function Keys
Function Descriptions
Features and Functions
Maintenance and Storage
Contents
Product Specifications
Thank you for purchasing the Inner Balance “Power ZG
w/air Massage Chair”. Before using this product please
read these instructions completely to ensure proper usage
of this product.
















Requesting Warranty Services
Standard Warranty Terms

Safety Precautions
Warning
To prevent any injuries
or accidents, children
should not be allowed
to use the chair.
Unplug the power cord and
keep your hands dry before
doing any maintenance.
Users must stop and
turn the power off im-
mediately, if they feel
ill when using the chair.
Users with any of the following conditions must consult their physician
prior to using the chair:
a. People with heart diseases.
b. People with malignant tumors.
c. Women who are pregnant or menstruating.
d. People with spinal abnormalities or curvature.
e. People who are currently being treated for an ailment by a
doctor or have just completed treatment.
f. People with osteoporosis.
If the chair is functioning abnormally turn off the main power switch and
unplug the unit. Contact the manufacturer immediately for assistance.
Do not attempt to disassemble or repair the chair yourself.


Safety Precautions
DO NOT
Do not use the chair in an environment that is dirty, greasy,
smoggy, or excessively humid.
Immediately stop using the chair and UNPLUG the power cord if the
upholstery is torn or worn-out exposing any of the mechanisms.
Contact the manufacturer immediately for assistance.
This chair is intended for use by one person at a time, DO NOT use
the chair for multiple people at a time.
People under the age of 16 should not use the chair unless under
the close supervision of an adult guardian. Do not eat or drink while
using the massage chair.
It is recommended to turn off the chair after 4 hours of use,
also between massages a short break of several minutes is
recommended.

Do not place the chair where it is directly exposed to sunlight
and don’t place the product near electric appliances.
Do not clean the chair with harsh cleaners containing
alcohol or other solvents.

Grounding Instructions


Important Safety Instructions


Proper Use of Zero Gravity Chair
Warning
In order to protect the chair and extend its lifespan,
please pay careful attention to and follow the
instruction for use of the chair.
1A The motors, electronic components, and mechanisms in this massage chair
are designed for 60-minute-non-stop use. Exceeding this length of time will
result in automatic stoppage.
2A It is recommended that users do not exceed 30 minutes of massage at a
time. Exceeding the recommended time may result in users feeling unwell
or uncomfortable.
3A Between massages it is important to let both the user and chair rest for
several minutes.
4A Do not leave the chair unattended while it is operating. Switch it off while
not in use.
5A Please be patient with the program reaction time of the controller. Most of
the buttons take about 2 to 3 seconds to react for your input, but some of
the buttons may take about 5 seconds to react for input, especially for the
changes of the default programs.
6A Do not sit or stand on the leg rest when it is in the up or reclined position.
7A If the chair is placed in a cold environment (Under 5ć/41) for an
extended period of time, it is suggested to increase the surrounding
temperature to a normal room temperature (15ć~20ć/59~68),
and wait for about 1 hour before use.
8A It is suggested to drink approx. 250cc of water after using the chair, this
could also help with better blood circulation.


Daily Maintenance of the Chair

Damage caused by the user attempting to disassemble the chair themselves
or modify the chair will void the warranty.
1. Long Term Storage
It is recommended to place the chair in a low humidity environment and
cover it with cloth to prevent dust and scratches to the upholstery. Do not
place the chair where it is directly exposed to sunlight and don’t place the
product near electric appliances.
2. Maintenance
Switch the power off and unplug the product before beginning cleaning.
Only use non-abrasive cleaners on the product, and make sure product
is polished dry with a cloth. Do not use heated devices like an iron or
hair dryer on the chair. Do not clean the upholstery with a washer or
dryer. Not following these recommendations will result in damage to the
product.
3. Remote Control
Use only a dry cloth to wipe the remote control. To avoid damage to the
controller do not pull, stretch; or place heavy objects on the controller or
its cord. Please use the remote control with care. Please avoid dropping
the controller in order to prevent it being damaged.

Troubleshooting Guide

POSSIBLE REASON
STATUS
Whenever the chair is performing abnormally, or won’t operate, please unplug
the power cord and contact the manufacturer directly for service.
Do not use the chair if the Back Pad or Seat Pad is damaged.
POSSIBLE REASON
STATUS
Confirm that it is plugged firmly into
the wall socket
Is the power on?
The chair wont operate

Components and Accessories

Please read this Operation Manual thoroughly
before s tart usi ng this pro duct
Operation Manual
ZG-571
Back Pad
Armrest
Footrest
Seat Pad
Accessories
Back Pad Headrest Power Cord Manual
Front
Side View
Headrest (Enlarges during
neck massage)
(Enlarges during massage)
Under seat pad and back pad.

Setup Instructions

STEP 1: Removing the Massage Chair
Remove the chair from box.
More than one person is needed to lift and remove the chair,
below areas are shown to use as hand holds.
Box
Holding Area
(both sides of the armrest)
Holding Area
(both sides of the armrest)

Setup Instructions

STEP 2˖Setting up the Massage Chair
When the massage chair is removed from the box, place the
backrest in an upright position.
Move the backrest to an upright position (to approx. 120 degrees)
until a “CLICK” sound is heard. This will indicate that the backrest
is locked into place.
STEP 3: Setting up the Back Pad
Place the back pad at the position where the zipper is on the backrest.
Headrest
Lock

Setup Instructions

STEP 4: Setup completed
Power
Power Cord
Fuse
Main Switch
When the above assembling is completed as recommended, attach the
power as in the picture and turn on the power. The chair is now ready to
be used, and to serve you with a relaxing and comfortable massage.
If the chair is plugged in and can’t be operated, check the switch.
Note: Please check for obstacles when adjusting the Backrest / Footrest
Up/ Down.

Moving the Chair Around

Moving Way 1
Moving Way 2
Note: Do not move the chair when it is in use.
AB
Unplug the power cord and lift the chair a little using proper lifting
technique, then push the chair forward.
Please unplug the power cord before moving.
Using proper lifting technique handle the chair using the hand holds
and lift in accordance with step 1’s set-up instructions, you will need
multiple parties for this.

Function Keys

6
1
2
4
5
8
9
10
11
3
7
NOTE:
Please read the instruction manual carefully, in order to operate the chair
proficiently. Refer to the information below for the function keys.
Do not use foreign or hard objects to press the controller’s
buttons, including fingernails.Improper use will result in
damaging the controller.
Do not drop the controller. Keeps hands dry while using the
controller.
Do not sit or step on the controller.
Do not press the buttons too hard.
Turn off the power after you are finished using the chair and
put it into the pocket after usage.

Function Descriptions


1
2
3
4
5
6
7
8
9
10
Backrest Adjustment Concurrent
adjustment on backrest (Down)
and footrest angle (Up)
Air Massage
Back &Waist Stretch Massage
Air Massage
Neck Massage
Vibration (Stop)
Zero Gravity Angle Recliner
Zero gravity angle/Return to
home position.
To prevent injury or damage to the chair, please ensure that
there are no obstructions in front of or behind the unit when
adjusting reclining angles.
Do not sit on, drop or exert extreme pressure on the control
panel.
Please ensure hands are dry during operation of the unit
and controller.
The controller may be affected by your watch, ring, or other
metallic equipment; please remove during use.
11
Power (Start/Stop)
LED Display
Massage Program I
TWIST Massage
Massage Program II
TRIM Massage
Massage Program III
TAICHI(Soft) Massage
Backrest Adjustment
Concurrent adjustment
on backrest (Up) and
footrest angle (Down)

Function Descriptions

Auto Program
Power(Start/Stop)
When the power button has been pressed the LED light will begin cycling and
the chair is ready for use.
StandBy
If the recline motor has overloaded all LED’s will light up at the same time.
Recline Motor Overloading
The chair features 3 default programs.
Choose your preferred program under I/II/III to perform the default techniques.
All are preset with reclining angles but you can always adjust your preferred
angle.
Massage Program I: TWIST Massage
Press the button to turn on/off the function.
Principal massage are a moderate twist massage to relax tired muscle.
The preset time is 15 minutes.
Press this button to turn the chair on/off.
When the power switch is on the chair is in standby mode.
If the LED is inoperative the power switch is not on.
Press the power button to turn on the chair, use alternate buttons to control
the chair, press the power button again to return to an upright idle position.

Function Descriptions

Backrest Adjustment
Press the button to adjust the angle of the backrest, press and hold the up or
down button to adjust the angle of the backrest. Continuously holding the up
or down button can synchronize the movement of the backrest and footrest.
Massage Program III: Taichi (soft) Massage
Press this button to turn this function on/off.
The beginning of this massage starts slow and soft, then will increase in speed
and strength.This program will automatically increase the massage as it goes
along for overall relaxation of fatigued body muscles.The preset time is 15
minutes, and the LED shows the functioning massage.
Massage Program II: TRIM Massage
Press this button to turn this function on/off.
The principle of this massage is to promote a soft rhythmic technique to
refresh the user. The preset time is 15 minutes, and the LED shows the
functioning massage.
The preset time is about 15 minutes.
Press the button to turn on the function, double-click to
turn off the function, but the chair will not return to
home position.
If you press the recline button 20 times in a row all the LED’s
will light up and the chair will cease any activity. Please turn
off the main power, after turning the main power back on the
chair can be used again.
This is designed for protecting against child use.

Function Descriptions

Massage Program : Neck Massage
Air Massage
Press the Stretch/Neck Air button to turn on the air massage function, the chair
will automatically perform inflation and deflation of air bag.
Massage program: Stretch Massage
Press this button to turn this function on/off.
The purpose of this massage is to focus on the lower back and waist to stretch
the waist and release body fatigue. The preset time is 15 minutes. The program
will automatically adjust the strength and speed of the air bag for the user.
The preset time is about 15 minutes.
Focus:Waist stretch, stretch like action.
Press this button to turn this function on/off.
The purpose of this massage is to use mild techniques to relax neck fatigue
and tired muscles. The preset time is 15 minutes.The program will automatically
adjust the strength and speed of the air bag for the user.
The preset time is about 15 minutes.
Focus: Relax tired and fatigued muscles caused by
working and reading.

Function Descriptions

Zero Gravity Recline
Vibrate (Stop)
Massage Program: Vibration Massage
Press this button to turn this function on/off.
This program focuses on the overall body massage. The massage incorporates
mild techniques to dispel the fatigue of the shoulders, neck, and back.
This function is able to work with auto programs and can’t
be operated separately.
Press the button to stop auto program and double clicking
it will restart the auto program.
This function is mainly for relaxing total body muscle tension
and the release of tired muscles.
Press this button to recline into the Zero Gravity position and return to the
upright position.
This is a therapeutic position for your body to be in having your legs above the
heart helps reduce pressure on the spine.
When you execute zero gravity reclining the back, buttocks, and legs can be
synchronized to reach the full recline positionThe pressure will be relieved
and fatigue will be dispelled b
y reclining in different positions.
This function is able to work with the 3 auto massage programs and air massage.