Innocenti ICONFECO60W User manual

User Manual
Instruction Manual
Induction Hob
MODEL: ICONFECO60W
Flexl-zone
Flexl-zone

2
Safety Warnings
This instructions are for your safety. Please read
them thoroughly prior to installation and retain
them for future reference.
The appliance is not to be used by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction.
Children being supervised not to play with the
appliance.
The appliance incorporates an earth
connection for functional purposes only.
WARNING: If the surface is cracked, switch off
the appliance to avoid the possibility of
electric shock.
WARNING:A steam cleaner is not be used.
Metallic objects such as knives, forks, spoons
and lids should not be placed on the hob
surface since they can get hot.
After use, switch off the hob element by its
control and do not rely on the pan detector.
The appliance is not intended to be operated
by means of external timer or separated
remote-control system.

3
Danger of fire: Do not store items on the
cooking surfaces.
CAUTION:The cooking process has to be
supervised. A short term cooking process has
to be supervised continuously.
WARNING: Unattended cooking on a hob with
fat or oil can be dangerous and may result in a
fire.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agentor similarly qualified persons in order to
avoid a hazard.
WARNING: Before obtaining access to
terminals, all supply circuits must be
disconnected.
This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. children shall not play
with the appliance. cleaning and user
maintenance shall not be made by children
without supervision.

4
WARNING: The appliance and its accessible
parts become hot during use.
Care should be taken to avoid touching
heating elements.
Children less than 8 years of age shall be kept
away unless continuously supervised.
NEVER try to extinguish a fire with water, but
switch off the appliance and then cover flame
e.g. with a lid or a fire blanket.
WARNING: Use only hob guards designed by
the manufacturer of the cooking appliance or
indicated by the manufacturer of the
appliance in the instructions for use as
suitable or hob guards incorporated in the
appliance. The use of inappropriate guards
can cause accidents.
Ensure the Power cord isn’t accessible after
installation.

5
Congratulations on the purchase of your new Induction Hob.
We recommend that you spend some time to read this Instruction / Installation
Manual in order to fully understand how to install correctly and operate it.
For installation, please read the installation section.
Read all the safety instructions carefully before use and keep this Instruction /
Installation Manual for future reference.
Product Overview
Top View
User interface
Flexl -zone
Flexl -zone

6
User interface
Reference Description
AZone select key
B
CON/OFF key
D Power/Timer slider regulating key
E
Boost control key/Keep warm
key
F
Timer key/Pause key
Heating zone Power
Heating Zone Max.Power（220-240V~ 50/60Hz）
2000/2800W（Booster）
1500/2000W（Booster）
1500/2000W（Booster）
2000/2800W（Booster）
Limit Rating Power 2800W
Child lock key/Connectivity key

7
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
A Word on Induction Cooking
Induction cooking is a safe, advanced, efficient, and economical cooking
technology. It works by electromagnetic vibrations generating heat directly in
the pan, rather than indirectly through heating the glass surface. The glass
becomes hot only because the pan eventually warms it up.
Before using your New Induction Hob
Read this guide, taking special note of the ‘Safety Warnings’ section.
Remove any protective film that may still be on your Induction hob.
Using the Touch Controls
The controls respond to touch, so you don’t need to apply any pressure.
Use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is no object (e.g.
a utensil or a cloth)covering them. Even a thin film of water may make the
controls difficult to operate.

8
Choosing the right Cookware
•Only use cookware with a base suitable for induction
cooking. Look for the induction symbol on the
packaging or on the bottom of the pan.
•You can check whether your cookware is suitable by carrying out
a magnet test. Move a magnet towards the base of the pan. If it
is attracted, the pan is suitable for induction.
•If you do not have a magnet:
1. Put some water in the pan you want to check.
2. If does not flash in the display and the water is heating, the pan is suitable.
•Cookware made from the following materials is not suitable: pure stainless steel, aluminum or
copper without a magnetic base, glass, wood, porcelain, ceramic and earthenware.
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is
the same size as the cooking zone. Use pans whose diameter is as large as the
graphic of the zone selected. Using a pot a slightly wider energy will be used at
its maximum efficiency. If you use smaller pot efficiency could be less than
expected. Pot less than 140 mm could be undetected by the hob. Always
centre your pan on the cooking zone.
Always lift pans off the Induction hob – do not slide, or they may scratch the
glass.

9
Using your Induction
select key by pressing “ ” key.
•You have not placed a pan on the correct cooking zone or,
•The pan you’re using is not suitable for induction cooking or,
•The pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
alternately with the heat If the display flashes
setting
This means that:
Hob
To start cooking
1. Touch the ON/OFF key（A）for 3 seconds.
After power on, the buzzer beeps once, all displays
show “ – “, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and
Of the cooking zone are clean and dry.
the surface
3. According to the heating zone where the pan is placed, select a relevant zone
4. Adjust heat setting by touching the slider regulating key(D) control.
• If you don’t choose a heat setting within 1 minute, the induction hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.

10
When you have finished cooking
Touching the relevant zone select key(A) that you wish to switch off.
Press the “-”key will decrease the power to “0” level,
or press the "+" and "-"at the same time, the power level will decrease to
0 straight away.
Beware of hot surfaces
will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate that i s
still hot.
Using the Boost function
Actived the boost function
1. Select the heating zone by touching the zone select key (A).
2. Touching the boost control key(E) ,the zone indicator will show “P” and
the power reaches Max.
Cancel the Boost function
1. Touching the relevant zone select key(A) that you wish to cancel.
2. Touchin g th e slide r regulatin g key(D ) t o cancel th e Boost function , the n th e
cookin g zon e will revert t o level 9.
• The
functio n can work i n an y cookin g zone.
• The cookin g zon e return s t o level 9 afte r 5 minutes.
1.Tou
ch th
e cookin g zon e selectio n butto n th at yo u wi sh t o u se kee p warm, an
indicato r nex t t o th e ke y will flash.
2.Tou ch th e butto n an d hol d fo r 3 second s, th e cookin g zon e indicato r will
display .
3. I f yo u wan t t o cancel th e kee p warm, sele ct th e cookin g zon e yo u wi sh to
operate, an d then touch the button and hold for
zone will be off.
3 seconds. The cooking
Usin g th e Kee p war m Function

11
and hold for 3 seconds again, all functions will restart at 2.Press th e pause ke y
th e previou s setting.
Using the Pause Function
The hob has a handy restart function to pause an d restart the cookin g process if
you’ re interrupted.
1.When the hob is on and working, press the pause key and hold for 3
seconds, all burner will stop working, and all LED indicator will show the symbol
“=”.
Using Child Lock Function
You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
When the controls are locked, all the controls except the OFF control are
disabled.
To lock the controls
Touch the keylock control for 3 seconds. The timer indicator will show “Lo“
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock control for a while.
3. You can now start using your Induction hob.
When the hob is in the lock mode, all the controls are disable except OFF,
you can always turn the hob off with the OFF control in an emergency, but
you shall unlock the hob first in the next operation.

12
FLEXIBLE AREA
• Thi s are a can b e use d as a singl e zone , according t o th e cookin g need s anytime.
• Flexibl e are a i s mad e of tw o independen t inductors th at can b e controlle d
separately . Whe n workin g as a singl e zone , a cookware i s move d fro m on e zon e to
th e othe r on e withi n th e flexibl e are a keepin g th e same powe r level of th e zon e
where th e cookware originall y w as placed , an d th e part th at i s no t covere d b y
cookware i s automaticall y switche d off.
•Important ：Mak e sure t o pl ace th e cookware s centere d o n th e singl e cookin g
zone . To use the whole flexible zone use a rectangular or oval cooking pot.
Examples of good pot placement and bad pot placement are shown below.

13
1. To activate the flexible area as a single big zone, press the zone selected key
and at the same time for the left group or press the zone selected
key and at the same time for the right group.
2. The flexible zone indicator above to the power lever indicator will be light
up.
3. According to the heating zone where the pan is placed, adjust heat setting by
touching the front slider regulating key(D) control.
4. If the pot is moved from the front to the rear part (or viceversa), the flexible
area detects automatically the new position, keeping the same power.
Over-Temperature Protection
An internal temperature sensor will monitor the temperature inside the Induction
hob. When an excessive temperature is detected, the Induction hob will stop
operation automatically.
Detection of Small Articles
When an unsuitable size or non-magnetic pan (e.g. aluminium), or some other
small item (e.g. knife, fork, key) has been left on the hob, the hob automatically
at
5. To deactivate the flexible area, press the zone selected key and
the same time hold 3 seconds for the left group or press the zone selected
key and at the same time hold 3 seconds for the right group.
99

14
go on to standby in 1 minute. The fan will keep cooling down the induction hob for
a further 1 minute.
Auto Shutdown Protection
Auto shut down is a safety protection function for your induction hob. It shut
down automatically if ever you forget to turn off your cooking. The default
working times for various power levels are shown in the below table:
Power level
1~3
4~6
7~8
9
Default working timer (min)
360
180
120
90
When the pot is removed, the induction hob can stop heating immediately and the
hob automatically switches off after 2 minutes.
People with a heart pace maker should consult with their doctor before
using any induction hob.
Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time has expired.
• You can set it to turn one cooking zone off after the set time has expired.
• You can set the timer for up to 99 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure at least one cooking is turned on.
Note: you can use the minute minder even if you’re not selecting any cooking
zone.
2. Touch the Timer key(F) . The minder indicator will start flashing and “10”
will show in the timer display.
3. Set the time by touching the “-“ or ”+” control of the timer
Hint: Touch the “-“ or ”+” control of the timer once to decrease or increase
by 1 minute.
Touch and hold the “-“or ”+” control of the timer to decrease or increase by

15
10 minutes.
Touching the “-“ and ”+” together, the timer is canceled, and the timer
indicator will turn off.
4. When the time is set, it will begin to count down immediately. The display will
show the remaining time .
5. Buzzer will beeps for 30 seconds and the timer indicator will turn off when
the set time has expired.
Setting the timer to turn one or more cooking
zones off
If the timer is set on one zone:
1. Select the relevant cooking zone which is working by touching the zone
select key (A).
2. Press the Timer key(F) , the minder indicator will start flashing “10” ,and
you can set the timer at this point.
3. Using the “+”or“-” buttons ,you can realize the set the timer from1 to 99
minutes.
Hint: Touch the “-” or “+” control of the timer once to decrease or increase
by 1 minute.
Touch and hold the“-”or “+” control of the timer to decrease or increase by 10
minutes.
Touching the “-” and“+”together, the timer is canceled, and the timer
indicator will turn off.
4. When the time is set, it will begin to count down immediately. Th e
display will show the remaining time and the timer indicator flash f or
5 seconds.
NOTE: The red dot next to power level indicator will illuminate indicating that
zone is selected.
5. When cooking timer expires, the corresponding cooking zone will be
switched off automatically.
6. Other cooking zones will keep operating if they were turned on previously.
7. When using “the timer as an alarm” and “the timer to swith off the zones ”
together, the display will show the remaining time of alarm as firs t priority.
Press cooking zone to show the remaining time of switch off timer.

Connectivity with hood
•You can link the hob with any cooker hood with RF Technology in our range.
Please contact the service department on 0344 800 1128 for advice if you
are unsure.
Once the hood and the hob are linked the speed of the hood will change
automatically according to the power level the hob is being used at.
The hob and hood have to be set up to link together. To achieve this follow
the connectivity function below.
1. Cooker hood and the induction hob must be paired by radio frequency before
remote control can occur. This only needs to be done once.
2. When connected the power output of the induction hob will control the
extraction rate of the cooker hood.
Set up new linking method:
1. make sure that the hob and the hood is off.
2. Touch the timer key “ ”and floodlight key” ” on the hood panel
simultaneously. LED light on the hood panel will be flashing red and white
alternatively.
3. Turn on the hob and make sure the connectivity indicator lamp is lighted up.
Note:Touch the connectivity key ” ” if the connectivity indicator is off .
Befor
e First Use
4. Press the keys and together on the hob and the connection indicator
will flash to confirm connection.
5. The control panel of the hood will show A for five seconds to indicate
connectivity has been made with the hob.
6. Press the keys and
connectivity settings.
together on the hob one more time to store the
16

Error
Message Possible Cause What to do
No pot or pot not suitable; Replace the pot;
ER03 Water or pot on the glass over the control Clean the user interface
F1 E
The connection between the display board and the
left mainboard is fail (the cooking zone which
indicator showing “E”)
1.Connection cable not correctly plugged or
defective;
2.Replace the Mainboard.
F3 E Coil temperature sensor failure. (the cooking zone
which indicator showing “E”) Replace the coil sensor
F4 E Mainboard temperature sensor failure. (the cooking
zone which indicator showing “E”) Replace the mainboard
E1 E Temperature sensor of the ceramic glass plate is
high
Please restart after the induction hob cools
down.
E2 ETemperature sensor of the IGBT is high Please restart after the induction hob cools
down.
E3 EAbnormal supply voltage(too high) Please inspect whether power supply is normal;
Power on after the power supply is normal.
E4 EAbnormal supply voltage (too low) Please inspect whether power supply is normal;
Power on after the power supply is normal.
E5 ETemperature sensor failure(the cooking zone which
indicator showing “E”)
Connection cable not correctly plugged or
assemble defective;
Failur e Displa y an d Inspection
I f an abnormalit y occurs , th e inductio n ho b will ente r th e protectiv e stat e
automaticall y an d displ ay correspondin g protectiv e codes:
The above is a table of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and
damages to the induction hob and please contact the service department.
Technical Specification
Cooking Hob ICONFECO60W
Cooking Zones 4 Zones
Supply Voltage 220-240V~
Installed Electric Power 7200W（Preset 2800W)
Product Size L×W×H(mm) 590X520X60
Building-in Dimensions A×B (mm) 565X495
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
17
IMPORTANT: The connectivity operation above must be completed within two
minutes of turning on the power to the hood. If this is not successful, switch off
both the hood and the hob, wait for one minute and attempt the connectivity
again.

18
L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm)
590 520 60 56 565 495 50 mini
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30 mm. Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the hotplate. As shown below:
Make sure the Induction cooker hob is well ventilated and the air inlet and outlet
are not blocked. Ensure the induction cooker hob is in good work state. As
shown below.
Note: The safety distance between the hotplate and the cupboard above
the hotplate should be at least 760 mm.
A(mm) B(mm) C(mm) D E
760 50 mini 20 mini Air intake Air exit 5mm

19
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do
not apply force onto the controls protruding from the hob.
locating the fixing brackets
•The unit should be placed on a stable, smooth surface (use the
Before you install the hob, make sure that
The work surface is square and level, and no structural members interfere
with space requirements.
The work surface is made of a heat-resistant material.
If the hob is installed above an oven, the oven has a built-in cooling fan.
The installation will comply with all clearance requirements and applicable
standards and regulations.
A suitable isolating switch providing full disconnection from the mains power
supply is incorporated in the permanent wiring, mounted and positioned to
comply with the local wiring rules and regulations.
The isolating switch must be of an approved type and provide a 3 mm air gap
contact separation in all poles (or in all active [phase] conductors if the local
wiring rules allow for this variation of the requirements).
The isolating switch will be easily accessible to the customer with the hob
installed.
You consult local building authorities and by-laws if in doubt regarding
installation.
You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for
the wall surface surrounding the hob.
When you have installed the hob, make sure that
The power supply cable is not accessible through cupboard doors or drawers.
There is adequate flow of fresh air from outside the cabinetry to the base of
the hob.
If the hob is installed above a drawer or cupboard space, a thermal
protection barrier is installed below the base of the hob.
The isolating switch is easily accessible by the customer.

20
packaging). Do not apply force onto the controls protruding from the hob.
fig.1
Fig.2
Fig.3
Flexl-
zone
Flexl-
zone