innohaus ABM 47 User manual

ABM 47
Distributed by/Distribuido por/Distribué par:
Beurer North America LP
900 N Federal Highway, Suite 300
Hallandale Beach, FL 33009
www.beurer.com
Questions or comments?
Call toll free 1-800-536-0366 or contact [e-mail]
¿Preguntas o comentarios? Llame gratis al
1-800-536-0366 o póngase en contacto [e-mail]
Questions ou commentaires? Appeler gratuitement
1-800-536-0366 ou communiquez avec [e-mail]
ENGLISH Blood pressure monitor
Instruction manual ................... 2
ESPANOL
Tensiómetro para brazo
Manual de instrucciones ....... 24
FRANÇAIS
Tensiomètre
Mode d’emploi........................ 46
Electromagnetic Compatibility
Information ..................................................69

READ THIS MANUAL COMPLETELY AND CAREFULLY BEFORE
USING THIS PRODUCT
Keep this manual in a safe location for future reference
LEA TODO ESTE MANUAL CON ATENCIÓN ANTES
DE USAR ESTE PRODUCTO
Conserve este manual en un lugar seguro para consultarlo en el futuro
LISEZ CE MODE D’EMPLOI COMPLÈTEMENT ET ATTENTIVEMENT AVANT
D’UTILISER CE PRODUIT
Conservez ce manuel en lieu sûr pour y faire référence ultérieurement

3
IMPORTANT SAFETY NOTES
Signs and symbols
Whenever used, the following signs identify safety and prop-
erty damage messages and designate a level of hazard or
seriousness.
ENGLISH
WARNING WARNING indicates a hazardous
situation which, if not avoided, could
result in death or serious injury.
CAUTION CAUTION indicates a hazardous situa-
tion which, if not avoided, may result
in minor or moderate injury.
NOTICE NOTICE addresses practices not
related to personal injury, such as
product and/or property damage.
Contents
IMPORTANT SAFETY NOTES........................................... 3
1. Getting to know your instrument................................. 9
2. Important information................................................... 9
3. Package Contents....................................................... 11
4. Device description ...................................................... 12
5. Getting started............................................................. 13
5.1 Inserting/Replacing batteries ................................ 13
5.2 Cuff Selection........................................................ 13
5.3 Setting the date and time ..........................................13
6. Measuring blood pressure ......................................... 14
6.1 Positioning cuff...................................................... 14
6.2 Correct posture ..................................................... 14
6.3 General Notes........................................................ 15
6.4 Taking Measurement............................................. 15
6.5 Saving, displaying and deleting measurements.... 16
7. Evaluating results........................................................ 17
7.1 Irregular heartbeat symbol .................................... 17
7.2 Joint National Committee (JNC) classification...... 17
8. Care, maintenance and storing the instrument........ 18
9. Error messages/troubleshooting .............................. 19
10. Technical Specifications........................................... 20
11. FCC Compliance Statement..................................... 21
12. Warranty..................................................................... 21

4
READ THIS ENTIRE MANUAL, THE SAFETY SECTION
AND ALL INSTRUCTIONS AND WARNINGS COMPLETE-
LY AND CAREFULLY BEFORE USING THIS PRODUCT.
FOLLOW ALL SAFETY INSTRUCTIONS AND WARNINGS
TO AVOID HAZARDOUS SITUATIONS AND TO MAKE
CORRECT USE OF THIS PRODUCT.
WARNING:
• Consult your physician or pharmacist before starting
to measure your blood pressure.
• Read and understand all instructions and warnings be-
fore using this device.
• Like any oscillometric blood pressure measurement de-
vices, certain medical conditions can affect the meas-
urement accuracy, among others:
– disorder of the cardiac rhythm
– very low blood pressure
– patients in shock
– patients with very low blood perfusion
– diabetes
– vessel anomalities
– people with electrical implants, such as a cardiac
pacemaker
– women who are pregnant.
Due to their condition the oscillometric measurement
method can produce incorrect readings. This represents
a risk for your health, since values may be interpreted
incorrectly. Always consult your physician to determine
what will be suitable for you.
• This product does not and is not intended to provide a
medical diagnosis. Measurements results are for refer-
ence only. Self-diagnosis and treatment, e.g. regarding
medication, using measured results represent a risk for
your health. Always consult with a licensed physician
for determination of appropriate medication and dos -
age thereof. Follow the instructions of your physician
or licensed healthcare provider. If you have or suspect
that you have a medical problem, promptly consult your
physician. If you have an emergency please call 911 im-
mediately.
• Only a physician or a trained health care professional who
is familiar with your medical history is able to accurately
interpret your blood pressure measurements. Consult
your physician before starting blood pressure monitoring.
• This product is not intended to serve as a substitute for
the advice of a physician or medical professional. This
product is not intended to substitute for regular medical
checkups. Contact your physician for specific informa-
tion about your blood pressure.
• Please note that technically related measuring toler-
ances are possible. Please see section “10. Technical
Specifications” for details.

5
WARNING:
• Any cuff related blood pressure measurement in high
repetition rates, can lead to severe measurement side
effects, e.g.
– any nerv compression with temporary arm/hand par-
alysis
– the release of an arterial or venous thrombus, which
can cause a life threatening situation.
Please contact your physician about the specific risks
of cuff pressure in your specific case.
• The ’irregular heartbeat’ function does not replace a
cardiac examination, but may help to detect potential
pulse irregularities at an early stage. Always consult your
physician to determine what will be suitable for you .
• The ’irregular heartbeat’ function is not designed for
diagnosing or treating an arrhythmic disorder. Arrhyth-
mia can only be ascertained by a licensed physician.
• The JNC chart is not intended to replace a medical
diagnosis. This chart is only a reference for different
classifications of blood pressure.
• If you notice abnormal or suspicious variations in blood
pressure measurements, consult your physician im-
mediately.
• Women who underwent a breast or axillar lymph node
removal operation should consult a physician or li-
censed healthcare provider before starting blood pres-
sure measurements.
• Prior to use, you have to ensure that the blood pressure
monitor is free of damage. If in doubt, do not use the
unit and contact customer service at 1-800-536-0366.
• This device is intended only for personal, non-commer-
cial, adult use in measuring blood pressure and pulse
rate. Do not use the product for any other purpose. This
product is not intended for use in a hospital, physician’s
office, or any other health care facility.
• The unit must be used in accordance to the specified
ambient conditions, otherwise the accuracy of readings
might be affected. See section “8. Care, maintenance
and storing the instrument” and section “10. Technical
Specifications” for details.
• Do not wrap the cuff around body parts other than your
upper left arm. Misuse represents a risk to your health.
• Please do not share the cuff with other persons, to avoid
cross infection.
• Use this monitor only on humans.
• This product is not intended for use by or on children,
toddlers and infants or on persons who cannot express
their consent, e.g. persons with mental disorders or the
like. Consult your physician for alternative methods of
measuring a child’s blood pressure.
• This product is not a toy. Keep it out of reach of chil-
dren, toddlers, and infants.
• Keep the product out of the reach of pets.
• Packaging materials are a deadly hazard for children
and can cause suffocation. Remove all packaging ma-

6
terials immediately and keep them away from children
at all times.
• This product contains small parts that may present a
choking hazard to children. Keep the unit and all parts
out of reach of children. NEVER LEAVE CHILDREN OR
THOSE WHO REQUIRE CLOSE SUPERVISION UN-
ATTENDED WITH THIS DEVICE.
• The tubing presents a strangulation hazard. Keep this
product away from children and those who require close
supervision, e.g. people with mental disorders. NEVER
LEAVE CHILDREN OR THOSE WHO REQUIRE CLOSE
SUPERVISION UNATTENDED WITH THIS DEVICE.
• Do not drape tube around neck. This presents a stran-
gulation hazard.
• People with disabilities, activity limitations, or who are
physically frail, should be assisted by another person
when using this unit.
• Proper cuff size is important for accurate measure-
ments. Only use the device on adults who have the
right upper arm circumference for this instrument. See
section “10. Technical Specifications” for suitable arm
circumferences.
• Do not use any cuffs, tubes, parts and accessories
other than those explicitly recommended by the manu-
facturer for use with this product. Parts and accessories
not approved for use with the device may cause dam-
age to your health and to the product.
• Electromagnetic interference: Avoid strong electrical or
electromagnetic fields in the direct vicinity of the device
(e.g. mobile telephones, microwave ovens) while it is
in operation, as inaccurate measurements may result.
To prevent such interference, use the unit at a suffi-
cient distance from such devices or turn the devices off.
• Do not measure your blood pressure while operating
a vehicle or in any situation which requires your full
attention.
• It is inappropriate for people with serious arrhythmia to
use this Electronic Sphygmomanometer.
CAUTION:
• The device should not be used when your arm has been
wounded/injured or when a catheter has been inserted.
Such use may result in injury.
• Remove any kind of upper arm jewelry or the like be-
fore taking a measurement. This could cause bruises.
• Do not place the arm cuff over heavy clothing (e.g. a
jacket or sweater sleeve) as the blood pressure monitor
will not be able to take a proper measurement and there
is an elevated danger of acquiring hematoma or skin
marks during the course of the measurement.
• In case the cuff does not stop inflating, interrupt the
measurement by pressing the start/stop button and
open the cuff at once.
• Do not disassemble the unit, it may result in injuries.

7
• When applying the arm cuff, make sure there are no
wrinkles in the cuff. This could cause bruises.
• Do not exert any kind of pressure on the hose during
measurement, e.g. laying your arms or any other object
on the hose. This could cause incorrect measurements.
• Blood pressure measurements can lead to temporary
marks on the skin at the site of the cuff placement. This
is especially the case in high repetition rates, in hyper-
tonic patients and in patients with weak pulses. In rare
cases a mark may persist for a couple of days. Please
contact your physician about these specific risks of cuff
pressure in your specific case.
• For hygienic reasons the cuff is intended only for the
use by one person.
• Prolonged over-inflation (cuff pressure exceeds 300
mmHg or maintained above 15mmHg for longer than
3 minutes) of the bladder may cause ecchymoma of
your arm.
NOTICE:
• The blood pressure monitor is made up of precision
electronic components. Accuracy of readings and the
instrument’s service life depend on careful handling.
Protect the unit against hard knocks (e.g. dropping the
unit), moisture, water, dirt, dust, chemicals, extreme hot
or cold temperatures, major temperature fluctuations,
direct exposure to sunlight and heat sources which are
too close (e.g. stoves, heating radiators). This may dam-
age the unit. The device must be stored in the speci-
fied ambient conditions. Please see section “8. Care,
maintenance and storing the instrument” and section
“10. Technical Specifications” for details.
• Do not use any aggressive solvents, cleaning agents,
detergents or any other strong chemicals to clean the
device.
• Never immerse and or spill water or any other liquid onto
the monitor or any components, otherwise liquid will en-
ter it and cause damage.
• Do not wash the unit in a washing machine, dish wash-
er or tumble dryer.
• Observe the local regulations for material disposal. Dis-
pose of the device, components and optional accessor-
ies according to applicable local regulations. Unlawful
disposal may cause environmental pollution.
• Never attempt to repair, open and/or disassemble the
unit (including arm cuff and optional accessory) or ad-
just it yourself. This may damage the unit and impair the
functions. If you need to have the unit repaired, please
contact our customer service. Please see warranty for
service contact. Before submitting any complaint, first
check the batteries and replace them if necessary.
• Changes or modifications to the device will nullify the
user warranty.
• Do not drop or insert any object into any opening or
hose. This may damage the unit.

8
• Do not press the buttons with excessive force or with
pointed objects.
Battery Handling Safety Precautions
• Use only the size and type of batteries specified.
• Be sure to follow the correct polarity when installing
the batteries. Reversed batteries may cause damage
to the device.
• Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc or rechargeable batteries) or
old batteries with fresh ones. Always replace batteries
as a simultaneous set.
• If the batteries in the device are depleted or the de-
vice will not be used for a long period of time, remove
the batteries to prevent damage or injury from possible
battery leakage.
• Do not try to recharge batteries not intended to be re-
charged; they can overheat and rupture (follow battery
manufacturer’s directions.)
• Do not dispose of batteries in fire, batteries may ex-
plode or leak.
• Clean the battery contacts and also those of the device
prior to battery installation.
• Remove discharged batteries from the product and dis-
pose/recycle in compliance with all applicable laws.
• Keep batteries away from children and pets. Batter-
ies may be harmful if swallowed. Should a child or pet
swallow a battery, seek medical assistance immedi-
ately.
• If a battery has leaked do not touch the battery fluid.
Avoid skin contact (e.g. put on protective gloves) and
clean the battery compartment with a dry cloth.
• Should battery fluid leak and come into contact with
your eyes or skin immediately rinse with plenty of clean
water. Please call 911 immediately.
• Swallowing batteries and/or battery fluid can be ex-
tremely dangerous. Keep the batteries and the unit out
of the reach of children and disabled persons. Should
any person swallow a battery and/or battery fluid,
please call 911 immediately
• Batteries can contain toxins that are harmful to the en-
vironment. Always dispose of batteries in accordance
with applicable local regulations.
• Never use rechargeable batteries. This may damage
the unit.
• Replace weak batteries before they discharge com-
pletely. When appears in the display please change
the batteries.
SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE
If the instruction manual is damaged or if you no longer
have the instruction manual in your possession, please
contact customer service at 1-800-536-0366 or at
[e-mail].

9
Dear Customer,
Congratulations on your purchase of this InnoHaus Blood
Pressure Monitor.
Please read and understand these instructions completely
and carefully before using this product and keep them for
later reference. Be sure to make them accessible to other
users and observe the information they contain.
1. Getting to know your instrument
The upper arm blood pressure monitor is used for non-
invasive measurement and monitoring of adults’ arterial
blood pressure. This allows you to quickly and easily meas-
ure your blood pressure and to display the last recorded
measurement. The values determined are classified and
graphically evaluated according to Joint National Commit-
tee (JNC) guidelines.
Blood pressure measurements determined by this mon-
itor are equivalent to those obtained by a trained observer
using the cuff/stethoscope auscultation method, within the
limits prescribed by the U.S. Department of Health and Hu-
man Service (Joint National Committee; JNC).
It is recommended the performance should be checked every
5 years or after repair. Please contact customer service.
2. Important information
Signs and symbols
The following symbols are used in these instructions for
use, on the packaging and on the type plate for the device
and accessories:
Caution
Note
Note on important information
Follow instructions for use
Type BF applied part (cuff only)
Direct current
Operating
Permissible storage temperature
and humidity

10
Storage
Permissible operating temperature
and humidity
Keep dry
S N
Serial number
Advice on use
• In order to ensure comparable values, always measure
your blood pressure at the same time of day.
• Before every measurement, relax for about five minutes.
• If you want to perform several measurements on the same
person, wait five minutes between each measurement.
• Do not take a measurement within 30 minutes after eat-
ing, drinking, smoking or exercising.
• Repeat the measurement if you are unsure of the meas-
ured value.
• The measurements taken by you are for your information
only – they are not a substitute for a medical examination!
Discuss the measurements with your doctor, and never
base any medical decisions on them (e.g. medicines and
their administration)!
• Do not use the blood pressure monitor on newborns,
pregnant women or patients with preeclampsia.
• Cardiovascular diseases may lead to incorrect measure-
ments or have a detrimental effect on measurement ac-
curacy. The same also applies to very low blood pres-
sure, diabetes, circulatory disorders and arrhythmias as
well as chills or shaking.
• The blood pressure monitor must not be used in connec-
tion with a high-frequency surgical unit.
• Only use the device on people who have the specified
upper arm measurement for the device.
• Please note that when inflating, the functions of the limb
in question may be impaired.
• During the blood pressure measurement, blood circula-
tion must not be stopped for an unnecessarily long time.
If the device malfunctions, remove the cuff from the arm.
• Avoid any mechanical restriction, compression or bend-
ing of the cuff line.
• Do not allow sustained pressure in the cuff or frequent
measurements. The resulting restriction of the blood flow
may cause injury.
• Ensure that the cuff is not placed on an arm in which the
arteries or veins are undergoing medical treatment, e.g.
intravascular access or therapy, or an arteriovenous (AV)
shunt.
• Do not use the cuff on people who have undergone a
mastectomy.

11
• Do not place the cuff over wounds as this may cause fur-
ther injury.
• As soon as the batteries are empty the blood pressure
monitor loses the date and time.
• To conserve the batteries, the monitor switches off auto-
matically if no buttons are pressed for one minute.
• The device is only intended for the purpose described in
these instructions for use. The manufacturer is not liable
for damage resulting from improper or careless use.
Notes on electromagnetic compatibility
• The device is suitable for use in all environments lis-
ted in these instructions for use, including domestic
environments.
• The use of the device may be limited in the presence
of electromagnetic disturbances. This could result in
issues such as error messages or the failure of the
display/device.
• Avoid using this device directly next to other devices
or stacked on top of other devices, as this could lead
to faulty operation. If, however, it is necessary to use
the device in the manner stated, this device as well
as the other devices must be monitored to ensure
they are working properly.
• The use of accessories other than those specified
or provided by the manufacturer of this device can
lead to an increase in electromagnetic emissions or
a decrease in the device’s electromagnetic immunity;
this can result in faulty operation.
• Failure to comply with the above can impair the per-
formance of the device.
3. Package Contents
• Blood Pressure Monitor Model ABM 47
• Universal arm cuff 8.7 in - 16.5 in (22 - 42 cm)
• Instruction manual
• Quick Start Guide
• Storage bag
• 4 x 1.5 V AA alkaline batteries

12
4. Device description
1. Cuff
2. Cuff tube
3. Cuff connector
4. START/STOP button
5. Function buttons -/+
6. LED JNC scale
7. Connection for cuff connector
8. Display
9. Memory button M
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured heart rate
5. Battery replacement symbol
6. Memory display: average value ( ), morning ( ),
evening ( ), memory space number
7. Release air
8. JNC classification
9. User memory
10. Cardiac arrhythmia symbol
For product information, questions or customer service call
toll free 1-800-536-0366 or email: [e-mail]
2
1
3
8
7
6
5
4
9
1
10
9
8
567
2
3
4

13
5. Getting started
NOTE:
To conserve the batteries, the monitor switches off auto-
matically if you do not press any buttons for 1 minute.
5.1 Inserting/Replacing batteries
• Remove the battery cover
from the back of the monitor.
• Clean the battery contacts
and those of the device pri-
or to installation with a soft
dry cloth.
• Insert or replace with only
four AA 1.5 V alkaline batteries. Make absolutely sure
that you insert them with the correct polarity (+/-) as indi-
cated (see the diagram inside the battery compartment).
Do not use other types of batteries.
• Replace the battery cover carefully.
If the battery change icon is continuously illuminated,
measurement is no longer possible and you must replace
all the batteries.
5.2 Cuff Selection
WARNING:
• Proper cuff size is important for accurate measure-
ments. Only use the device on adults who have the
right upper arm circumference for this instrument.
This unit includes 1 size of arm cuffs:
• Universal size fits 8.7 in - 16.5 in (22 - 42 cm)
Measure your arm circumference
around your bicep using a
normal measuring tape.
5.3 Setting the date and time
It is essential to set the date
and time. Otherwise, you
will not be able to save your
measured values correctly with a date and time and to ac-
cess them again later.
To set the date and time, proceed as follows:
• Press the memory button Mfor at least three seconds.
• The year display will start to flash. Set the year with the
function buttons -/+ and confirm with the memory but-
ton M.
• Set the month, day, hour and minutes and confirm each
setting with the memory button M.

14
6. Measuring blood pressure
6.1 Positioning cuff
NOTE:
Always properly position the Arm Cuff on the arm at heart
level, according to the following instructions.
Fit the cuff round your bare left
upper arm. Do not place the arm
cuff over heavy clothing (e.g. a
jacket or sweater sleeve) as the
blood pressure monitor will not be
able to take a proper measurement.
Blood circulation in the arm should
not be restricted by tight clothing or
other objects.
The cuff should be placed on the
upper arm so that the lower edge is
0.8 in to 1.2 in (2 to 3 cm) above the
bend of the elbow and above the
artery. The tube should be in line
with the centre of the palm.
Now place the free end of the cuff
snugly, but not too tightly, around
the arm, and fix it with the Velcro
fastener. The cuff should be fitted
tight enough to allow just two fin-
gers to fit beneath the cuff.
Insert the cuff tubing into the
socket for the cuff attachment on
the left side of the unit. Make sure
it is inserted securely in the main
unit and that there are no kinks in
the cuff tubing.
Important: This device should only be operated with the
original cuff. The cuff included with the device is suitable
for an upper arm circumference of 8.7 in - 16.5 in (22 - 42
cm). Replacement cuffs from other models cannot be used
with this model. Doing so, will result in inaccurate readings
or error messages.
6.2 Correct posture
• Rest at least for 5 minutes before each measurement.
Otherwise there may be erroneous results.
• You can perform the measurement either sitting or lying
down. Always make sure that the cuff is on a level with
your heart.
• In order not to distort the result, it is important to keep
still during the measurement and not talk. The most pre-
cise measurement results are obtained if you strive for a

15
relaxed measurement situation. You may close your eyes
and breathe calmly during the measurement and don’t
cross your legs.
• Please note that any muscle movement during inflation
or deflation can cause measurement error.
6.3 General Notes
• For reliable monitoring and reference of blood pressure,
keeping long-term records is recommended.
• To minimize measurement variations due to physical
activity, rest at least 5 minutes before measuring your
blood pressure (or 15 minutes after strenuous activity).
You should not be physically tired or exhausted while tak-
ing measurement.
• Inordertoobtainarestingconditionbloodpressure,
avoid eating, drinking alcohol and caffeinated beverages,
smoking, exercising, and bathing for at least 30 minutes
before taking a measurement.
• Stressraisesbloodpressure.
• Performmeasurementsinaquietandrelaxedenviron-
ment at room temperature.
• Alwayswaitatleast5minutesbetweenmeasurements
to allow the blood circulation in your arm to return to nor-
mal. You may need to increase the wait time depending
on your individual physiological characteristics. Because
of normal physiologic changes and the many external
factors influencing blood pressure, it is unusual to obtain
identical blood pressure measurements, even when taken
a few minutes apart. Speak with your physician to deter-
mine what is affecting your blood pressure and which
variation may be seen as normal in your case.
• Theaccuracyofanybloodpressuremeasurementwith
this device can be affected by a multitude of causes.
Some can be avoided some have to be accepted at the
time of measurement. Speak with your physician about
possible causes affecting your blood pressure.
• Donotinflatethecuffunlesswrappedaroundarm.
• Ifnobuttonispressedforapprox.1minutetheautomatic
shutoff function shuts off the unit in order to preserve the
batteries.
• Donottouchtheunit,thetubeandcuffand/orpress
any buttons when measurement is in progress, except
for stopping the measurement. Doing so may cause in-
correct readings.
6.4 Taking Measurement
NOTE:
If you are using the unit for the first time, please remove the
protective film from the display.
• Put on the cuff around your bare left upper arm as de-
scribed previously and assume the position in which you
want to carry out the measurement.
• Switch on the blood pressure monitor with the start/stop
button .

16
• Before the measurement, the last saved test result is
briefly displayed. If there is no measurement in the mem-
ory, the instrument always displays the value “0”.
• The cuff is pumped up. Cuff air pressure is released slowly.
6.5 Saving, displaying and deleting measurements
• The results of every successful measurement are stored
together with the date and time. If there are more than 30
measurements, the oldest measurements are lost.
• Press the - or + function button. Select the desired user
memory ( ... ) by pressing the -/+ function button.
Confirm your selection with the START/STOP button .
• If you press the memory button M, the average value Aof
all the stored measured values in the user memory will be
displayed. If you press the memory button Magain, the
average value of the morning measurements for the last 7
days will be displayed. (morning: 5.00 – 9.00, display AM ).
If you press the memory button Magain, the average
value of the evening measurements for the last 7 days
will be displayed. (evening: 18.00 – 20.00, display PM ).
If you continue to press the memory button M, the most
recent individual measured values are displayed in turn
with the date and time.
• You can delete the memory by pressing and holding the
memory button Mfor 3 seconds.
• To switch off, press the START/STOP button .
• If you forget to switch off the unit, it will switch off auto-
matically after 1 minute.
NOTE:
This monitor will re-inflate automatically if the system de-
tects that your body requires more pressure for measure-
ment. As soon as a heart rate is detected, the heart rate
symbol is displayed.
• When the measurement is completed the cuff will deflate
entirely. Heart rate, systolic and diastolic blood pressure
are displayed.
• You can interrupt measurement at any time by pressing
the start/stop button .
• _ appears if it has not been possible to perform the
measurement properly. Observe the section on error mes-
sages/troubleshooting and repeat the measurement.
• The test result is saved automatically.
• To switch off and release the pressure, press the start/
stop button again. If you forget to switch off the de-
vice, it switches off automatically after approx. 1 minute.
Wait at least 5 minutes before taking another measurement.

17
7. Evaluating results
NOTE:
A single measurement does not provide an accurate indica-
tion of your true blood pressure. You need to take and record
several readings over a period of time. Try to measure your
blood pressure at the same time each day for consistency.
7.1 Irregular heartbeat symbol
WARNING:
• The ’irregular heartbeat’ function does not replace a car-
diac examination, but may help to detect potential pulse
irregularities at an early stage. Always consult your phys-
ician to determine what will be suitable for you.
• The ’irregular heartbeat’ function is not designed for
diagnosing or treating an arrhythmic disorder. Arrhyth-
mia can only be ascertained by a licensed physician.
This symbol indicates that certain heartbeat/pulse ir-
regularities were detected during the measurement.
NOTE:
• Talking, moving, shaking or an irregular pulse during the
measurement can result in the appearance of this symbol.
• Repeat the measurement if the flashing icon is displayed
after the measurement. Please note that you should rest
at least 5 minutes between measurements and not talk
or move during the measurement. If the icon continues
to be displayed in subsequent readings, we recommend
you to consult your physician in order to determine if it is
cause for concern. Do not try to interpret readings or at-
tempt to treat any condition yourself. Always follow the
guidance of a health professional. If you have an emer-
gency call 911 immediately.
7.2 Joint National Committee (JNC) classification
WARNING:
• The JNC chart is not intended to replace a medical
diagnosis. This chart is only a reference for different
classifications of blood pressure.
According to JNC Guidelines/Definitions and the latest find-
ings, the test results of adults can be classified and evalu-
ated according to the following chart:
Stages of blood pressure
levels Systolic
(mmHg)
Diastole
(mmHg) Color
Stage 2 Hypertension ≥=180 ≥=110 Red
160– 179 100–109 Red
Stage 1 Hypertension 140– 159 90–99 Red
Pre-hypertension 130– 139 85–89
Yellow
120– 129 80– 84 Green
Normal <120 <80 Green
Source: U.S. Department of Health and Human Service, JNC7 (2004), adapted
Stages of blood pressure levels Systolic (mmHg) Diastole (mmHg) Color
Stage 2 Hypertension >= 180 > =110 Red
160 –179 100 –109 Red
Stage 1 Hypertension 140 –159 90 – 99 Red
Pre-hypertension 130 –139 85 – 89 Yellow
120 –129 80 – 84 Green
Normal <120 <80 Green
Source: U.S. Department of Health and Human Service, JNC7 (2004), adapted

18
NOTE:
This standard, however, is a general guideline as an in-
dividual’s blood pressure varies among different people,
age groups, etc. Please consult your physician for proper
diagnosis.
The bar graph in the display and the scale on the unit indicate
the range of the blood pressure which has been recorded.
NOTE:
If the values for systolic and diastolic pressure are in two
different JNC ranges (e.g. systolic in the high-normal range
and diastolic pressure in the normal range) the graphic JNC
classification on the unit indicates the higher range (high-
normal in the example described).
8. Care, maintenance and storing
the instrument
NOTE:
• Further documents which include information for the Cali-
bration of the device can be asked at the service address.
• The device can be tested in case of supposed inaccur-
acy every two years. Please contact the nearest service
address.
To keep your digital blood pressure monitor in the best con-
dition and protect the unit from damage follow the direc-
tions listed below:
• Clean your device and cuff carefully only with a slightly
moistened soft cloth and dry it immediately with a soft
dry cloth. Do not press.
• When storing the device, make sure that no heavy objects
are placed on top of it.
• Do not fold the cuff and tubing tightly. The cuff tube
should not have any sharp kinks and keep it away from
sharp edges.
•If the unit is stored near freezing, allow it to acclimate to
room temperature before use.
•Always store the unit in its storage bag after use.
•This unit may not meet its performance specifications if
stored or used outside of the temperature and humidity
ranges (see section “10. Technical Specifications”).
• Use the unit consistent with the instruction provided in
this manual.
• It is recommended to disinfect the cuff 2 times every week
if needed. Wipe the inner side (the side touching the skin)
of the cuff with a soft cloth, squeezed after moistened
with Ethyl alcohol (75-90%), then dry the cuff by airing.
• Cleaning of the cuff after the usage of every 200 times is
recommended.
• The monitor can maintain the safety and performance
characteristics for a minimum of 10,000 measurements
or 3 years.

19
• The cuff integrity is maintained after 1,000 open–close
cycles of the closure.
• No component of this blood pressure monitor can be
maintained by the user. Circuit diagrams, component part
lists, descriptions, calibration instructions, or other
information, that will assist qualified service personnel to
repair parts that are designated as repairable, are avail-
able on request.
D isposal
O bserve the local regulations for material disposal. Dispose
o f the device in accordance with local regulations. If you
h ave any questions, please contact the local authorities re
s ponsible for waste disposal.
9. Error messages/troubleshooting
In the event of errors, the error message _ appears on
the display.
Error messages may appear if:
• systolicordiastolicpressurecouldnotbemeasured(
or appears on the display),
• systolicordiastolicpressurewasoutsidethemeasure-
ment range ( or Lo appears on the display),
• thecuffisfastenedtootightlyorloosely( or ap-
pears on the display),
• thepumppressureishigherthan300mmHg( ap-
pears on the display),
• pumpinguptakeslongerthan160seconds( appears
on the display),
• thereisasystemordeviceerror( , , or
appears on the display),
• thebatteriesarealmostempty .
In such cases, repeat the measurement. Ensure that you
do not move or speak.
If necessary, reinsert or replace the batteries.
Technical alarm – description
Should the recorded blood pressure (systolic or diastolic) lie
outside the limits specified in the section “Technical speci-
fications”, the technical alarm will appear on the display
indicating either “ ” or “Lo”. In such cases, you should seek
medical assistance and check the accuracy of your proce-
dure.
The limit values for the technical alarm are factory set and
cannot be adjusted or deactivated. These alarm limit val-
ues are accorded second priority under the standard IEC
60601-1-8.
The technical alarm is a non-locking alarm and must not be
reset. The signal shown on the display will disappear auto-
matically after about 8 seconds.

20
NOTE:
If the unit still does not work, contact customer service at
1-800-536-0366.
10. Technical Specifications
Model no. ABM 47
Type BM 47
Measurement
method Oscillometric, non-invasive blood pressure measurement on the up-
per arm
Measurement range Cuff pressure 0-300 mmHg,
systolic 60-260 mmHg,
diastolic 40-199 mmHg,
Pulse 40-180 beats/minute
Display accuracy Systolic ±3 mmHg,
diastolic ±3 mmHg,
pulse ±5 % of the value shown
Measurement
inaccuracy Max. permissible standard devia- tion according to clinical testing:
systolic 8 mmHg/diastolic 8 mmHg
Memory 4 x 30 memory spaces
Dimensions 5.3 in x 4 in x 2 in
(134 mm x 102 mm x 52.5 mm)
Weight Approximately 13.4 oz (380 g)
(without batteries and with cuff)
Cuff size 8.7 in - 16.5 in (22 - 42 cm)
Permissible operat-
ing conditions
+50 °F to +104 °F (+10 °C to +40 °C) ,
≤ 85% relative air humidity (non-
condensing)
Permissible storage
conditions -4 °F to +122 °F (-20 °C to +50 °C), ≤ 85% relative air humidity, 800-
1050 hPa ambient pressure
Power supply 4 x 1.5V AA batteries
Battery life For approx. 500 measurements,
depending on the blood pressure
level and/or pump pressure
Accessories Instruction for use, 4 x 1.5V AA
batteries, storage pouch
Classification Internal supply, IPX0, no AP or
APG, continuous operation, type
BF applied part
Key to symbols
WARNING! Read the safety
information and all instruc-
tions to avoid serious injury.
application part Type BF