Innostor BIN 30 User manual

Dimensions - maximum
1
Mark screw positions for lid brackets and runners on
both cabinet sides.
3 Fit the lid brackets and runners to cabinet sides using
screws A.
2 Lift the locking levers and remove the front part of
each runner.
Ensure shoulder of bracket
faces outwards.
4 Assemble each runner until the locking levers are
securely attached.
Please ensure that all the above fittings are present before
installation begins.
G
G
H
H
J
J
J and K
J
K
K
K
N
L M
Q
P
Issue date: 23.08.12
Parts
Ax12 3.5 x 16mm screw
Bx4 3.5 x 14mm screw
Cx4 Screw (M4 x 8mm)
Dx2 Screw (M6 x 15mm)
Ex2 Screw (M5 x 8mm)
Fx4 Screw (M5 x16mm)
Tools required
BIN 30
Fitting instructions
Lid bracket RH x1
Lid bracket LH x1
Runner RH x1
Lid x1
Door bracket RH x1Door bracket LH x1
Frame x1 Container x2
Runner LH x1
418mm
290mm
194mm
37mm
229mm
389mm
422mm
18mm
478mm
484mm 414mm
492mm
Note: Dimensions are for
horizontal slotted holes.
IMPORTANT - The unit has a maximum loading limit of 25kg including door.
Bin to suit 450mm wide cabinet using 18mm thick carcase material.
All fixings supplied must be used for installation.

184 mm
Centre line
of door
View on rear of door
184 mm
325 mm 96 mm
421 mm
IMPORTANT:
When fitting the brackets to the door
careful consideration should be
taken to ensure fixing screws do not
protrude through the fascia.
7
9Align the door to the cabinet using the
adjustment screws.
Fit the door brackets to the door. 8Fit the door to the runners.
10 Fit the containers.
IMPORTANT - The unit
has a maximum
loading limit of 25kg
including door.
5
G
H
F
F
F
E
E
F
D
D
B
B
B
B
M
L
D
D
Calculate centre line of door and use
above measurements to mark door
bracket screw positions.
Fit door brackets to door using
screws B. Ensure adjustment
screws Dare fitted at this stage.
N
JQ
P
J
K
C
C
C
C
Issue date: 23.08.12
Fit the frame to the runners using screws C. 6 Fit the lid to the lid brackets.
Q
25