Innostor 3/4 CAROUSEL SET User manual

min. 900 or 1000mm
min. 900 or 1000mm
min. 560mm for 900 unit
min. 610mm for 1000 unit
B
A A
A A
A
A
A
A
B
B
C
D
E
E
F
F
G
G
G
HJ
K
L
K
Issue date: 30.08.12
Parts
Ax8 3.5 x 16mm screw
Tools required
IMPORTANT - Each basket has a maximum loading limit of 10-15 kg.The unit has a total loading limit of 20kg.
All fixings supplied must be used for installation.
95mm
95mm
95mm
95mm
3/4CAROUSEL SET - 900/1000mm LH/RH
Fitting instructions
1 Minimum cabinet dimensions
3 Fit the top and bottom mounting brackets to cabinet. 4 Fit the top and bottom basket nylon rings to both baskets
2 Measure and mark centres for the top and bottom mounting
brackets.
Top mounting
bracket x1
Basket top
nylon ring x2
Basket lower
nylon ring x2
Bottom
mounting bracket x1
Top pole x1 Bottom pole x1 Allen key x1
Basket x2
Top pole
locking ring x1
Basket
locking ring x2
Please ensure that all the above fittings are
present before installation begins.

H
C
D
L
B
G
J
H
L
C
C
D
J
K
K
C
H
JL
Issue date: 30.08.12
IMPORTANT - Each basket has a maximum loading limit
of 10-15 kg. The unit has a total loading limit of 20kg.
5Assemble the baskets on the bottom pole.
Below each basket fit a metal basket retaining ring (D).
Insert the top pole into the bottom pole and temporarily secure
in the lowest position using the top pole retaining ring (C).
7Locate the bottom pole on the bottom mounting plate
ensuring the locking lug is engaged.
Extend the top pole and locate in the top mounting plate.
Lower the top pole retaining ring and lock above the
bottom pole.
8Select the required basket heights and lock the metal
basket rings (D) to the lower pole ensuring the cam
mechanism stops the basket rotation in the correct
position.
6Lay the assembled unit on its side and insert into the
cabinet. Rotate the unit so that the pole is vertical.