NetApp FAS8200 Series Manual

Prepare for installation Install hardware Cable storage Complete system setup
and configuration
1 2 3 4
FAS8200 Systems
Installation and Setup Instructions
Prepare for installation |1
Screwdriver Windows client
Runs the software to configure
your storage system
Rack space
3U per chassis
You provide
In the box Power cables
Controller-to-controller cables
Cluster interconnect cable
Part number 112-00297 or 112-00299
Storage cables
SAS cables
Part number 112-00436 or
112-00437 or 112-00438
Ethernet cables
Additional network cables
For connecting your storage to your network
switch and Microsoft®Windows®client
Host cables
10 GbE network cable
Part number 112-00299 or
112-00300 or 112-00301
Optical network cable
Part number 112-00188 or
112-00189 or 112-00090
Pre-setup
1. Go to mysupport.netapp.com and create an account, register your system, and get your license keys.
2. Unpack all boxes and inventory contents.
2. Go to to AFF and FAS System Documentation Center and click FAS8200 systems, and then click Installation and Setup:
- Download and complete the Cluster Configuration Worksheet.
- Watch the videos listed under Setup videos.
.
215-15015_A0

Install hardware |Stage 2
Optional 2-post
mid-mount brackets
• Unpack all boxes and inventory contents.
• Install rail kits, as needed, using the enclosed
installation instructions.
• Install system components on rails or in a
system cabinet per installation instructions.
• Attach cable management arms.
• Place the bezel on the front of the system.
Unpack and install system
3
4
5
1
2
1
2
Cluster interconnect cable
(PN 112-00297 or 112-00299)
Ethernet cables
Ethernet cables
To 10 GbE data network switches
3B
2To management network switches
3A To 10GBASE-T data network switches
3A To 10GBASE-T data network switches
2To management network switches
5
5
To cluster network switches
1
To cluster network switches
1
To 10 GbE data network switches
3B
Switched ONTAP
B
To 10 GbE data network switches
3B
2To management network switches
3A To 10GBASE-T data network switches
3A To 10GBASE-T data network switches
2To management network switches
1
5
5
To 10 GbE data network switches
3B
Switchless ONTAP
A
Cable controller for switchless ONTAP (option A)
or for switched ONTAP (option B)
See your network administrator for help connecting to your switch.
OPTION A: Cable the cluster
interconnect e0a to e0a and e0b
to e0b ports on both controllers.
OPTION B: Cable e0a and e0b
on both controllers to cluster
network switches.
Connect wrench ports
to the management switch.
Your network topology defines the
data network switch connections:
OPTION A: Connect 10GBASE-T
ports e0c and e0d to the switches
OPTION B: Connect e0e|0e through
e0h|0h to the switches
OPTION C: Do Option A and Option B
Strap the cables to the cable
management arms. (not shown)
Cable both power supplies
for each chassis.
ALL power cords MUST be used for all units.
10 GbE network cables
(PN 112-00299 or 112-00300 or 112-00301)

Cable storage |Stage 3
Multi-path HA cabling a FAS8200 WITH external storage
(DS212C or DS224C disk shelves)
Storage cables
(PN 112-00436, 112-00437, or 112-00438)
IOM12 21
L N K L N K
43
L N K L N K
IOM12 21
L N K L N K
43
L N K L N K
IOM12 21
L N K L N K
43
L N K L N K
IOM12 21
L N K L N K
43
L N K L N K
1
2
AC AC
1
2
AC AC
IOM12 21
L N K L N K
43
L N K L N K
IOM12 21
L N K L N K
43
L N K L N K
IOM12 21
L N K L N K
43
L N K L N K
IOM12 21
L N K L N K
43
L N K L N K
1
2
AC AC
1
2
AC AC
IOMA IOMB
Stack 1
First shelf
Controller 2
Controller 1
Stack 2
First shelf
Last shelf
Last shelf
2
1
3
Connect the shelf-to-shelf ports
Connect the controllers to the first stack of disk shelves
Connect the controllers to the second stack of disk shelves
Primary path from controller to stack
Secondary path from controller to stack

Set the console port on the laptop to 115,200 baud
with N-8-1, connect to the micro-USB port on the
controller with the console cable.
Connect the laptop to the Management switch
and give the laptop a TCP/IP address on the
management switch
Assign an initial node management IP address to
one of the nodes. If you have DHCP configured on
your management network, record the IP address
assigned to the new controllers. Otherwise use
Cluster Setup wizard to assign the node
management IP address.
a. Open a console session using PuTTY, a terminal server, or the equivalent for your environment.
b. Enter the management IP address when prompted by the script.
Open a browser and enter management IP address. (https://xxx.xxx.xxx.xxx)
2Complete initial cluster setup:
1. Make sure that your laptop has network discovery enabled. See your laptop’s help for more information.
2. Connect your laptop to the Management switch.
3. Go to network devices and double-click either ONTAP icon.
Note: Accept any certificates displayed on your screen.
If your laptop has network discovery enabled:
OPTION
A
If your laptop does not have network discovery enabled:
OPTION
B
Ensure the controller modules are completely cabled and then turn the power supplies.
Management subnet
Laptop
3Use System Manager Guided Setup to configure your cluster
4Completing setup
1. Verify the health of your system by running Config Advisor.
2. After you have completed the initial configuration, go to the NetApp ONTAP Resources page for information
about configuring additional features in ONTAP.
micro USB console cable
Ethernet cable
2
3
4
1
If your system has one or more external drive shelves, set the shelf IDs:
1. Power on the drive shelf, and then remove the end cap on the left of the shelf.
2. Press and hold the orange button until the first digit blinks, and then press the button to advance
the first digit (0-9) to the desired number. The first digit continues to blink.
3. Press and hold the button until the second digit blinks, and then press the button to advance
the second digit (0-9) to the desired number. The first digit stops blinking, and the second digit continues to blink.
4. Press and hold the button until the second digit stops blinking, and then replace the end cap on the shelf.
5. Wait about 10 seconds for both digits to start blinking again and for the LED to illuminate,
and then power-cycle the drive shelf to make the shelf ID take eect.
6. Repeat these steps for any remaining drive shelves.
1
Complete system setup and configuration |Stage 4
FAS8200 system
Management subnet 2
Laptop
1