NETGEAR ReadyNAS RMEM04 User manual

ReadyNAS RMEM04 Memory
Module
Installation Guide
Models
•RR3312
•RR4312
•RR4360
June 2017
202-11726-01
350 E. Plumeria Drive
San Jose, CA 95134
USA

Support
Thank you for purchasing this NETGEAR product.You can visit www.netgear.com/support to register your
product, get help, access the latest downloads and user manuals, and join our community.We recommend that
you use only official NETGEAR support resources.
Trademarks
©NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc.Any non-NETGEAR
trademarks are used for reference purposes only.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory. See the regulatory
compliance document before connecting the power supply.
2
ReadyNAS RMEM04 Memory Module

Contents
Chapter 1 Install Additional Memory
Chapter 2 Access the Inside of the Storage System on a ReadyNAS 3312, 4312,
or 4360
3

1
Install Additional Memory
You can install additional memory in RR3312, RR4312, and RR4360 ReadyNAS systems.
WARNING:
Static electricity can harm delicate components inside your system.To prevent
static damage, discharge static electricity from your body before you touch any
of the electronic components, such as the microprocessor.You can do so by
periodically touching an unpainted metal surface on the system.
To install an RMEM04 memory module in your ReadyNAS system:
1. Power off your ReadyNAS server.
See the ReadyNAS OS 6 Rack-Mount Hardware Manual for power-off instructions for your server.Visit
http://support.netgear.com/product/ReadyNAS-OS6 to download a PDF of the manual.
2. Unplug the power cord.
3. Press the power button.
Pressing the power button with the power disconnected discharges any power stored in the power supply.
4. Access the inside of your ReadyNAS system.
4

For details on accessing the inside, see Access the Inside of the Storage System on a ReadyNAS 3312,
4312, or 4360 on page 6.
J3 J4 J5 J6
5. Locate the memory expansion slots on the system motherboard.
6. Align the RMEM04 memory expansion module keys with the keys of a free memory expansion slot and
press the module down until the tabs snap into place.
Place modules according to the following table.
Slot J6Slot J5Slot J4Slot J3Number of Modules
•1
••2
•••3
••••4
7. Replace the chassis cover.
8. Reinstall the ReadyNAS system if you needed to uninstall it.
9. Plug in the ReadyNAS system and turn on the power.
5

2
Access the Inside of the Storage System
on a ReadyNAS 3312, 4312, or 4360
To access the inside of a ReadyNAS 3312, 4312, or 4360 storage system:
1. If your system is mounted in a rack, grasp the two handles on either side and pull the system straight out
until it locks.
The system is locked when you hear a click sound.
2. Open the top cover.
How you release the top cover depends on the model:
6

•On a ReadyNAS 3312 or 4312 system, press the two release buttons on the top of the cover.
•On a ReadyNAS 4360 system, press the two release buttons on the sides of the chassis.
PUSH
PUSH
7

3. Slide the top cover back.
4. Lift the top cover from the chassis.
You can now access the inside of the system.
8