Innova CaddyPack User manual

CaddyPack Instructions PART I - Step 1
If BackSaver and CaddySeat are already
assembled, skip to Part II.
Place BackSaver Strap as shown with
longer straps through and over the
lumbar pad and middle support rod.
PART I - Step 2 PART I - Step 3
Take the end of the strap out of the
adjusting buckle as shown.
Push the end of the strap through the
seat cover hole and over the seat bar as
shown.
PART I - Step 4
Put the end of the strap back in the
adjusting buckle.
Repeat steps 2 through 4 for other
corresponding strap as shown.
Continue onto Part II.
PART I - Step 5

PART II - Step 1 PART II - Step 2
Bring longer straps around each side of
seat legs.
Place bag (either Deluxe, Competition, or
DISCarrier) as shown.
PART II - Step 3 PART II - Step 4
Thread bottom bag attachment strap
through seat eyelet.
Put end of strap through buckle and
leave a little wiggle room. Repeat for
other side.
PART II - Step 5
Attach lower BackSaver strap clips to
lower bag attachment points.
Attach upper BackSaver strap clips to
upper bag attachment points as shown.
Adjust straps to suit.
PART II - Step 6