
How To UseHow To Use
8 9
Please checking, cleaning
or installing new filters.
When the filter indication
light is turn on red and
flashing , meaning the
filters should be replace.
After install new filters, please
use needle article pressing
enforce repleasement
button,The filter state light will
turn to nutural.
ImageReset filter used time
ImageEnforce to reset filter used time
When the filter indication light
is turn on red and flashing, that
the filters should be replace.
Please checking, cleaning or
installing new filters.
Reset the filter lights by press
and holding it for 3 senconds.
The filter state light will turn to
nutural.
Enforce
Replacement
Replacement
Alarm
Filter Status
Natural
Enforce
Replacement
Replacement
Alarm
Filter Status
Natural
Enforce
Replacement
Replacement
Alarm
Natural
Enforce
Replacement
Replacement
Alarm
Natural
When the filter state indication
light is turn on red and
flashing ,that the filters should
be replace.
Please checking, cleaning or
installing new filters.
Reset the filter lights by press
and holding it for 3 senconds.
The filter state light will turn to
nutural.
Switch off and disconnect
the air purifier from the
scoket.
Replease new filter Image
Open and remove the front
cover.
Enforce
Replacement
Replacement
Alarm
Natural
①
②
③