inohom IM19XDX User manual

Input Module
(IM19XDX)
V1.0
Smart Life Solutions
USER MANUAL
EN

Content
1: Important Safety Information
2: Description and Properties
3: Technical Properties
3.1: Technical Details
3.2: Technical Drawing
4: Installation
4.1: Before Installation
4.2: Mechanical and Electrical Assembly
4.2.1: Return to Factory Settings
4.2.2: Electrical Assembly
4.2.3: Mechanical Assembly
5: Communication Properties
6: Commissioning
7: Regulations
3
4
4
4
5
5
5
6
6
6
7
8
9
10

3
1: Important Safety Informaton
ELECTRIC SHOCK DANGER!
Do not open the product!
Please read ths manual before usng the devce!
Not followng the recommendatons n ths manual mght lead to danger.
The manufacturer GST ELEKTRONİK LTD ŞTİ cannot be hold responsble
for any loss or damagesarsng from not followng the nstructons n ths user manual.
Devce s no longer under warrant after faults arsng n these cases.
The devce s desgned to control other electronc devces and operates n houses.
Incorrect connecton or usage mght cause fire or electrc shocks.
There mght be voltage on the connecton tps even f the devce s turned off.
The fuse or power source must always be dsabled f the connectons wll be changed.
Do not operate the devce wth wet or most hands to avod electrc shock rsk.
Do not make any changes on ths devce that are not specfied n the user manual.
Do not leave the devce drectly exposed to sunlght or other heat sources. Do
not place the devce near open fire or ntense heat sources such as electrc
Other devces
The manufacturer GST ELEKTRONİK LTD. ŞTİ. cannot be held responsble for
any damages or out-of-warranty f any unsutable connectons other than the
connectons expressed n the connecton manual are made wth other devces.
Ths product s desgned only for ndoors use n a dry envronment.
Do not use the product n wet or damp envronment such as bathtub, snk,
bath and pool.
Devce Cleanng
Heat Sources and Fre
Do not clean the product wth solvent (thnner, gasolne, acd etc.) or
abrasve cleanng products. Avod cleanng wth vapour cleanng tools.
heater.

2: Descrpton and Propertes
3: Techncal Propertes
3.1: Techncal Detals
İnohom 4/8 channel Input Module (IM19XDX) ntegrates conventonal swtches
or cabled sensors to your nohom wreless smart home system. There are
programmable 4/8 dry contactor nput.
The supply voltage s manufactured n dfferent models whch can be used as 12VDC or
240VAC. Brand ndependent permanent swtch can be connected to IM19XDX nput that
can fit n standard plug and swtch box.
4
Desgn
Power Consumpton 0.5W (Max)
Supply Voltage 12VDC or 100-240VAC
ABS
4 or 8 Dry Contactor Input
RF 433 Mhz
nohom OS
2.5mm² screwed electrc termnal
IP 20
0 - 50°C
Max 50°C %65 Ambent Humdty
Max 2000m
49mm x 43mm x 29mm
Swtch In-Case Mountng
EN55032:2015, EN55024:2011, EN62368-1
Inputs
Communcaton
Operatng System
Connectons
Protecton Class
Operatng Temperature
Heght
Relatve Humdty
Dmensons
Installaton
EMC Standards
IM19XDX
A:Supply 240 VAC
B:Supply 12 VDC
4:4 Channel Input
8:8 Channel Input

mm
0 5 10 15 20 25
Scale: 3/2
3.2: Techncal Drawng
49mm 25mm
43mm
5
inohom
29mm
4: Installaton
4.1: Before Installaton
Unsutable connectons aganst the manual mght cause health, lfe or materal
damage rsk.
- Do not power on the devce before all the connectons are completed.
- Check the devce user manual to create a secure connecton.
- Do not make any connectons other than the connectons specfied n the scheme.
- Do not connect wth devces that do not comply wth securty standards.
Mount the devce away from metal surfaces or objects to avod any negatve
mpact on the wreless communcaton performance.

4.2: Mechancal and Electrcal Assembly
4.2.1: Return to Factory Settngs
4.2.2: Electrcal Assembly
The supply voltage mght vary dependng on product order code. 4 channel
model nputs are IN0, IN1, IN2 and In3.
L : Phase
N : Neutral
GND : Negatve
Connecton
IN : Input
Connecton
COM (12V) :
Common Drect
Current Contact
Pont
VIN : Sensor
Supply Connecton
OUT : Sensor
Output Connecton
The devce wll return the
factory settngs when the
Reset button s pressed
and held for 10 seconds.
6
Max 18VDC can be nputted to nputs from sensor returns. Input module
nput settng must be changed for sensor return NO/NC state.
The devce mght be damaged f GND and COM(+12V) ends contact.
Any damages due to these problems are outsde the scope of warranty.
inohom
Reset Button
State LED
inohom
N
L
COM (+12V)
GND
IN0 IN1
IN2
IN3
IN4
IN5
IN6
IN7
inohom
N
L
COM (+12V)
GND
IN0 IN1
IN2
IN3
IN4
IN5
IN6
IN7
N
L
N
L
VIN
GND
OUT

The product s desgned wth European standard flush mounted box dmensons.
Permanent swtch or snap swtch can be connected to the nput ndependent of
4.2.3: Mechancal Assembly
7
brand and model.
inohom
inohom
N
L
COM (+12V)
GND
IN0 IN1
IN2
IN3
IN4
IN5
IN6
IN7
inohom
GND
12V
COM (+12V)
GND
IN0 IN1
IN2
IN3
IM198DA IM194DD

5: Communcaton Propertes
inohom inohom
inohom
SMART TOUCH
SWITCH 1
SMART TOUCH
SWITCH 2
WEB
RF 433 Mhz
inohom
CCM176X
16A
COM1
COM2
COM3
COM4 COM5
COM7
COM6
Q1
Q0
Q6
Q7
I 0
I 1
I 2
I 3
I 4
I 5 I 6
I 7
I 15 I 14 I 13 I 12 I 11 I 10
I 9
I 8
Q15
Q14
Q13
Q12
Q11
Q10
Q9
Q8
12V
+ -
Q5
Q4
Q3
Q2
COM0
10A
inohom
IM19XDX
NOVA PANEL
MOBILE
CCM 176X
SWITCH
Other devces
ntegrated va IP
Camera, Intercom, EIO
8
The devces use nohom communcaton protocol. Input Module can wrelessly
communcate wth other nohom products and can learn and swtch output state
values of other products.
İnohom IP Gateway devces (Nova Panel/Home Manager) enable managng other
devces ntegrated to the automaton va the nternet by enablng the system to
communcate on IP layer.

6: Commssonng
9
The commssonng of the nohom products after assembly s completed by the
authorzed nohom dealers and techncal staff. Detaled management panel
nterface ensured communcaton and other settngs between the devces.
At commssonng stage, the “FIND” button on the automaton control panel nterface s
used to dentfy the related devce.
The LEDs on the devce wll blnk wth 1 second nterval when pressed “FIND” button
and press “STOP” button when the devce s found.
Then, settng parameters are sent to the related devce wth “MATCH” button and the
devce becomes operatonal.
“IO TEST” buttons on the control panel nterface can be used for testng the correct
cable connecton of the devce. The state of the desred output can be changed as
on/off and energy flow towards the termnal s dentfied.

7: Regulatons
Legal Warnng
Declaraton of Conformty
GST Elektronk Elektrk Yazlm Makna Dan. San. Ve Tc. Ltd. St.
Kemaloz Mah. Degrmendere Cad. No:8/A 64100 Usak/Turkey
www.nohom.com
0090 850 811 82 83
nfo@nohom.com
The propertes, functonaltes and other product propertes can be changed wthout pror
notce. nohom reserves the rght to revew or update the products, software or documents
wthout any lablty to notfy any ndvduals or organzatons. İnohom s a trademark of
GST Elektronk Elektrk Yazılım Makna Dan. San. ve Tc. Ltd. Şt. All other brand and
product names heren are the trademarks of ther respectve owners.
The domestc producton logo on all the products show
that themanufacturng and software are 100% completed
n Turkey.
The company has ISO 9001 Qualty Management, 14001
Envronment Management, 45001 Occupatonal Health
and Safety Standards.
The devces tagged wth WEEE symbol shall not be dscarded wth other
domestc waste. The product should be delvered to the related collecton pont
for waste electrc and electronc equpment recycle.
CE mark s a free trademark only for authorzed officals and ths mark
does not contan any property assurance.
The product box s manufactured from a recyclable materal. Do not dscard the
package waste wth domestc or other waste and recycle package wastes.
9001:2015 14001:2015 45001:2018
Smart Life Solutions
10