Measurement Computing PCI-DAS1000 User manual

[phone] | [email protected] | artisantg.com
-~
ARTISAN
®
~I
TECHNOLOGY
GROUP
Your definitive source
for
quality
pre-owned
equipment.
Artisan Technology
Group
Full-service,
independent
repair
center
with
experienced
engineers
and
technicians
on staff.
We
buy
your
excess,
underutilized,
and
idle
equipment
along
with
credit
for
buybacks
and
trade-ins
.
Custom
engineering
so
your
equipment
works
exactly as
you
specify.
•
Critical
and
expedited
services
•
Leasing
/
Rentals/
Demos
• In
stock/
Ready-to-ship
•
!TAR-certified
secure
asset
solutions
Expert
team
ITrust
guarantee
I
100%
satisfaction
All
tr
ademarks,
br
a
nd
names, a
nd
br
a
nd
s a
pp
earing here
in
are
th
e property of
th
e
ir
r
es
pecti
ve
ow
ner
s.
Find the Measurement Computing PCI-DAS1000 at our website: Click HERE

PCI-DAS1000
Multifunction Analog & Digital I/O
User's Guide
Document Revision 3, March, 2009
© Copyright 2009, Measurement Computing Corporation

2
HM PCI-DAS1000.doc
Your new Measurement Computing product comes with a fantastic extra —
Management committed to your satisfaction!
Thank you for choosing a Measurement Computing product—and congratulations! You own the finest, and you can now enjoy
the protection of the most comprehensive warranties and unmatched phone tech support. It’s the embodiment of our mission:
To provide PC-based data acquisition hardware and software that will save time and save money.
Simple installations minimize the time between setting up your system and actually making measurements. We offer quick and
simple access to outstanding live FREE technical support to help integrate MCC products into a DAQ system.
Limited Lifetime Warranty: Most MCC products are covered by a limited lifetime warranty against defects in materials or
workmanship for the life of the product, to the original purchaser, unless otherwise noted. Any products found to be defective in
material or workmanship will be repaired, replaced with same or similar device, or refunded at MCC’s discretion. For specific
information, please refer to the terms and conditions of sale.
Harsh Environment Program: Any Measurement Computing product that is damaged due to misuse, or any reason, may be
eligible for replacement with the same or similar device for 50% of the current list price. I/O boards face some harsh
environments, some harsher than the boards are designed to withstand. Contact MCC to determine your product’s eligibility for
this program.
30 Day Money-Back Guarantee: Any Measurement Computing Corporation product may be returned within 30 days of
purchase for a full refund of the price paid for the product being returned. If you are not satisfied, or chose the wrong product by
mistake, you do not have to keep it.
These warranties are in lieu of all other warranties, expressed or implied, including any implied warranty of merchantability or
fitness for a particular application. The remedies provided herein are the buyer’s sole and exclusive remedies. Neither
Measurement Computing Corporation, nor its employees shall be liable for any direct or indirect, special, incidental or
consequential damage arising from the use of its products, even if Measurement Computing Corporation has been notified in
advance of the possibility of such damages.

3
Trademark and Copyright Information
TracerDAQ, Universal Library, Measurement Computing Corporation, and the Measurement Computing logo are either
trademarks or registered trademarks of Measurement Computing Corporation.
Windows, Microsoft, and Visual Studio are either trademarks or registered trademarks of Microsoft Corporation
LabVIEW is a trademark of National Instruments.
CompactFlash is a registered trademark of SanDisk Corporation.
XBee and XBee-PRO are trademarks of MaxStream, Inc.
All other trademarks are the property of their respective owners.
Information furnished by Measurement Computing Corporation is believed to be accurate and reliable. However, no
responsibility is assumed by Measurement Computing Corporation neither for its use; nor for any infringements of patents or
other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or
copyrights of Measurement Computing Corporation.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form by any
means, electronic, mechanical, by photocopying, recording, or otherwise without the prior written permission of Measurement
Computing Corporation.
Notice
Measurement Computing Corporation does not authorize any Measurement Computing Corporation product for use
in life support systems and/or devices without prior written consent from Measurement Computing Corporation.
Life support devices/systems are devices or systems which, a) are intended for surgical implantation into the body,
or b) support or sustain life and whose failure to perform can be reasonably expected to result in injury.
Measurement Computing Corporation products are not designed with the components required, and are not subject
to the testing required to ensure a level of reliability suitable for the treatment and diagnosis of people.

4
Table of Contents
Preface
About this User's Guide.......................................................................................................................5
What you will learn from this user's guide.........................................................................................................5
Conventions in this user's guide .........................................................................................................................5
Where to find more information.........................................................................................................................5
Register-level programming...............................................................................................................................6
Chapter 1
Introducing the PCI-DAS1000..............................................................................................................7
Overview: PCI-DAS1000 features.....................................................................................................................7
Software features................................................................................................................................................7
PCI-DAS1000 block diagram.............................................................................................................................8
Chapter 2
Installing the PCI-DAS1000..................................................................................................................9
What is included with your PCI-DAS1000 ........................................................................................................9
Hardware .......................................................................................................................................................................... 9
Additional documentation................................................................................................................................................. 9
Optional components........................................................................................................................................................ 9
Unpacking the PCI-DAS1000 ..........................................................................................................................10
Installing the software ......................................................................................................................................10
Installing the hardware .....................................................................................................................................10
Configuring the hardware.................................................................................................................................11
Differential input mode....................................................................................................................................................11
Single-ended input mode .................................................................................................................................................11
Connecting the board for I/O operations ..........................................................................................................11
Connectors, cables –main I/O connector.........................................................................................................................11
Pinout –main I/O connector............................................................................................................................................12
Cables ..............................................................................................................................................................................14
Field wiring and signal termination .................................................................................................................................14
Chapter 3
Calibrating the Board..........................................................................................................................15
Introduction ......................................................................................................................................................15
Calibration theory.............................................................................................................................................15
Chapter 4
Specifications......................................................................................................................................16
Analog input.....................................................................................................................................................16
Digital input/output...........................................................................................................................................17
Counters............................................................................................................................................................17
Power consumption ..........................................................................................................................................18
Environmental ..................................................................................................................................................18
Main connector and pin out..............................................................................................................................18
8-channel differential mode pin out.................................................................................................................................19
16-channel single-ended mode pin out.............................................................................................................................20
Declaration of Conformity..................................................................................................................21

5
Preface
About this User's Guide
What you will learn from this user's guide
This user's guide explains how to install, configure, and use the PCI-DAS1000 so that you get the most out of
its analog, digital, and timing I/O features.
This user's guide also refers you to related documents available on our web site, and to technical support
resources.
Conventions in this user's guide
For more information on …
Text presented in a box signifies additional information and helpful hints related to the subject matter you are
reading.
Caution! Shaded caution statements present information to help you avoid injuring yourself and others,
damaging your hardware, or losing your data.
< : > Angle brackets that enclose numbers separated by a colon signify a range of numbers, such as those assigned
to registers, bit settings, etc.
bold text Bold text is used for the names of objects on the screen, such as buttons, text boxes, and check boxes. For
example:
1. Insert the disk or CD and click the OK button.
italic text Italic text is used for the names of manuals and help topic titles, and to emphasize a word or phrase. For
example:
The InstaCal® installation procedure is explained in the Quick Start Guide.
Never touch the exposed pins or circuit connections on the board.
Where to find more information
The following electronic documents provide relevant information to the operation of your PCI-DAS1000.
MCC's Specifications: PCI-DAS1000 (the PDF version of the Specifications chapter in this guide) is
available on our web site at www.mccdaq.com/pdfs/Specs/PCI-DAS1000-spec.pdf.
MCC's Quick Start Guide is available on our web site at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf.
MCC's Guide to Signal Connections is available on our web site at
www.mccdaq.com/signals/signals.pdf.
MCC's Universal Library User's Guide is available on our web site at
www.mccdaq.com/PDFmanuals/sm-ul-user-guide.pdf.
MCC's Universal Library Function Reference is available on our web site at
www.mccdaq.com/PDFmanuals/sm-ul-functions.pdf.
MCC's Universal Library for LabVIEW™User’s Guide is available on our web site at
www.mccdaq.com/PDFmanuals/SM-UL-LabVIEW.pdf.
PCI-DAS1000 User's Guide (this document) is also available on our web site at
www.mccdaq.com/PDFmanuals/PCI-DAS1000.pdf.

PCI-DAS1000 User's Guide About this User's Guide
6
Register-level programming
You should use the Universal Library to control your board. Only experienced programmers should perform
register-level programming.
If you need to program at the register level in your application, refer to the Register Map for the PCI-DAS1000
Series (available at www.mccdaq.com/registermaps/RegMapSTC1000.pdf).

7
Chapter 1
Introducing the PCI-DAS1000
Overview: PCI-DAS1000 features
This manual explains how to install and use the PCI-DAS1000. This board is a multifunction analog and digital
I/O board designed for the PCI bus.
The PCI-DAS1000 provides either 16 single-ended or eight differential analog inputs. Input ranges are
software-selectable as either bipolar or unipolar.
Analog input ranges for the PCI-DAS1000 are:
Bipolar: ±10 V, ±5 V, ±2.5 V, and ±1.25 V
Unipolar: 0 to 10 V, 0 to 5 V, 0 to 2.5 V and 0 to 1.25 V
The PCI-DAS1000 provides a 250 kHz sample rate.
The PCI-DAS1000 offers 24-bits of parallel, digital I/O (two 8-bit ports and two 4-bit ports). You can configure
each port independently as input or output.
This board has an 82C54 counter chip which has three user-accessible 16-bit counters. Clock, gate, and output
signals from two of three counters are available on a 100-pin connector. The third counter is used internally.
The PCI-DAS1000 is fully plug-and-play. All addresses and interrupt channels are set with software.
Software features
For information on the features of InstaCal and the other software included with your PCI-DAS1000, refer to
the Quick Start Guide that shipped with your device. The Quick Start Guide is also available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf.
Check www.mccdaq.com/download.htm for the latest software version.

PCI-DAS1000 User's Guide Introducing the PCI-DAS1000
8
PCI-DAS1000 block diagram
PCI-DAS1000 functions are illustrated in the block diagram shown here.
Figure 1. PCI-DAS1000 functional block diagram

9
Chapter 2
Installing the PCI-DAS1000
What is included with your PCI-DAS1000
The following items are shipped with the PCI-DAS1000:
Hardware
PCI-DAS1000
Additional documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). This booklet supplies a brief description of
the software you received with your PCI-DAS1000 and information regarding installation of that software.
Please read this booklet completely before installing any software or hardware.
Optional components
If you ordered any of the following products with your board, they should be included with your shipment.
C100FF-x cable

PCI-DAS1000 User's Guide Installing the PCI-DAS1000
10
Signal termination and conditioning accessories
MCC provides signal termination and conditioning products for use with the PCI-DAS1000. Refer to the
"Field wiring and signal termination" section for a complete list of compatible accessory products.
Unpacking the PCI-DAS1000
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the PCI-DAS1000 from its packaging, ground yourself using a wrist strap or by
simply touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, notify Measurement Computing Corporation immediately by
phone, fax, or e-mail:
Phone: [phone] and follow the instructions for reaching Tech Support.
Fax: [phone] to the attention of Tech Support
Email: [e-mail]
Installing the software
Refer to the Quick Start Guide for instructions on installing the software on the Measurement Computing Data
Acquisition Software CD. This booklet is available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-
Quick-Start.pdf.
Installing the hardware
The PCI-DAS1000 board is completely plug-and-play. There are no switches or jumpers to set. Configuration is
controlled by your system's BIOS. To install your board, follow the steps below.
Install the MCC DAQ software before you install your board
The driver needed to run your board is installed with the MCC DAQ software. Therefore, you need to install the
MCC DAQ software before you install your board. Refer to the Quick Start Guide for instructions on installing
the software.
1. Turn your computer off, open it up, and insert your board into an available PCI slot.
2. Close your computer and turn it on.
If you are using an operating system with support for plug-and-play (such as Windows 2000 or Windows
XP), a dialog box pops up as the system loads indicating that new hardware has been detected. If the
information file for this board is not already loaded onto your PC, you will be prompted for the disk
containing this file. The MCC DAQ software contains this file. If required, insert the Measurement
Computing Data Acquisition Software CD and click OK.
3. To test your installation and configure your board, run the InstaCal utility you installed in the previous
section. Refer to the Quick Start Guide that came with your board www.mccdaq.com/PDFmanuals/DAQ-
Software-Quick-Start.pdf for information on how to initially set up and load InstaCal.
Allow your computer to warm up for at least 15 minutes before acquiring data with this board. The high speed
components used on the board generates heat, and it takes this amount of time for a board to reach steady state
if it has been powered off for a significant amount of time.

PCI-DAS1000 User's Guide Installing the PCI-DAS1000
11
Configuring the hardware
All hardware configuration options on the PCI-DAS1000 are software controlled. You can select some of the
configuration options using InstaCal, such as the analog input configuration (16 single-ended or eight
differential channels), and the source for the two independent counters. Once selected, any program that uses
the Universal Library will initialize the hardware according to these selections.
Following is an overview of the available hardware configuration options for this board. There is additional
general information regarding analog signal connection and configuration in the Guide to Signal Connections
(available on our web site at www.measurementcomputing.com/signals/signals.pdf).
Differential input mode
When all channels are configured for differential input mode, eight analog input channels are available. In this
mode, the input signal is measured with respect to the low input. The input signal is delivered through three
wires:
The wire carrying the signal to be measured connects to CH# IN HI.
The wire carrying the reference signal connects to CH# IN LO.
The third wire, typically a system ground, connects to LLGND.
Single-ended input mode
When all channels are configured for single-ended input mode, 16 analog input channels are available. In this
mode, the input signal is referenced to the board's signal ground (LLGND). The input signal is delivered
through two wires:
The wire carrying the signal to be measured connects to CH# IN HI.
The second wire connects to LLGND.
Connecting the board for I/O operations
Connectors, cables –main I/O connector
The table below lists the board connectors, applicable cables, and compatible accessory boards for the PCI-
DAS1000.
Board connectors, cables, accessory equipment
Connector type
100-pin high density Robinson Nugent connector
Compatible cable
C100FF-x, unshielded ribbon cable. x = length in feet (Figure 2)
Compatible accessory products
(with the C100FF-x cable)
ISO-RACK16/P
CIO-ERB08*
CIO-ERB24*
SSR-RACK08*
SSR-RACK24*
BNC-16SE
BNC-16DI
CIO-MINI50 (2 required)
CIO-TERM100 (1 required)
SCB-50 (1 required)
* These devices require the DADP-5037 PCI-DAS to 37-pin SSR and ERB adapter board.

PCI-DAS1000 User's Guide Installing the PCI-DAS1000
12
Pinout –main I/O connector
8-channel differential mode
Signal Name
Pin
Pin
Signal Name
GND
100
50
GND
N/C
99
49
N/C
N/C
98
48
PC +5V
N/C
97
47
N/C
N/C
96
46
N/C
A/D Int. Pacer Output
95
45
A/D External Trigger
IN
N/C
94
44
N/C
N/C
93
43
N/C
PC -12V
92
42
A/D External Pacer
PC GND
91
41
CTR4 OUT
PC +12V
90
40
CTR4 GATE
PC GND
89
39
CTR4 CLK
N/C
88
38
N/C
CTR5 OUT
87
37
N/C
CTR5 GATE
86
36
N/C
CTR5 CLK
85
35
N/C
N/C
84
34
N/C
N/C
83
33
N/C
CTR6 OUT
82
32
N/C
CTR6 GATE
81
31
N/C
CTR6 CLK
80
30
N/C
N/C
79
29
N/C
N/C
78
28
N/C
N/C
77
27
N/C
N/C
76
26
N/C
N/C
75
25
N/C
FIRSTPORTC Bit 7
74
24
N/C
FIRSTPORTC Bit 6
73
23
N/C
FIRSTPORTC Bit 5
72
22
N/C
FIRSTPORTC Bit 4
71
21
N/C
FIRSTPORTC Bit 3
70
20
N/C
FIRSTPORTC Bit 2
69
19
N/C
FIRSTPORTC Bit 1
68
18
LLGND
FIRSTPORTC Bit 0
67
17
CH7 IN LO
FIRSTPORTB Bit 7
66
16
CH7 IN HI
FIRSTPORTB Bit 6
65
15
CH6 IN LO
FIRSTPORTB Bit 5
64
14
CH6 IN HI
FIRSTPORTB Bit 4
63
13
CH5 IN LO
FIRSTPORTB Bit 3
62
12
CH5 IN HI
FIRSTPORTB Bit 2
61
11
CH4 IN LO
FIRSTPORTB Bit 1
60
10
CH4 IN HI
FIRSTPORTB Bit 0
59
9
CH3 IN LO
FIRSTPORTA Bit 7
58
8
CH3 IN HI
FIRSTPORTA Bit 6
57
7
CH2 IN LO
FIRSTPORTA Bit 5
56
6
CH2 IN HI
FIRSTPORTA Bit 4
55
5
CH1 IN LO
FIRSTPORTA Bit 3
54
4
CH1 IN HI
FIRSTPORTA Bit 2
53
3
CH0 IN LO
FIRSTPORTA Bit 1
52
2
CH0 IN HI
FIRSTPORTA Bit 0
51
1
LLGND
PCI slot ↓

PCI-DAS1000 User's Guide Installing the PCI-DAS1000
13
16-channel single-ended mode
Signal Name
Pin
Pin
Signal Name
GND
100
50
GND
N/C
99
49
N/C
N/C
98
48
PC +5V
N/C
97
47
N/C
N/C
96
46
N/C
A/D Int. Pacer Output
95
45
A/D External Trigger In
N/C
94
44
N/C
N/C
93
43
N/C
PC -12V
92
42
A/D External Pacer
PC GND
91
41
CTR4 OUT
PC +12V
90
40
CTR4 GATE
PC GND
89
39
CTR4 CLK
N/C
88
38
N/C
CTR5 OUT
87
37
N/C
CTR5 GATE
86
36
N/C
CTR5 CLK
85
35
N/C
N/C
84
34
N/C
N/C
83
33
N/C
CTR6 OUT
82
32
N/C
CTR6 GATE
81
31
N/C
CTR6 CLK
80
30
N/C
N/C
79
29
N/C
N/C
78
28
N/C
N/C
77
27
N/C
N/C
76
26
N/C
N/C
75
25
N/C
FIRSTPORTC Bit 7
74
24
N/C
FIRSTPORTC Bit 6
73
23
N/C
FIRSTPORTC Bit 5
72
22
N/C
FIRSTPORTC Bit 4
71
21
N/C
FIRSTPORTC Bit 3
70
20
N/C
FIRSTPORTC Bit 2
69
19
N/C
FIRSTPORTC Bit 1
68
18
LLGND
FIRSTPORTC Bit 0
67
17
CH15 IN
FIRSTPORTB Bit 7
66
16
CH7 IN
FIRSTPORTB Bit 6
65
15
CH14 IN
FIRSTPORTB Bit 5
64
14
CH6 IN
FIRSTPORTB Bit 4
63
13
CH13 IN
FIRSTPORTB Bit 3
62
12
CH5 IN
FIRSTPORTB Bit 2
61
11
CH12 IN
FIRSTPORTB Bit 1
60
10
CH4 IN
FIRSTPORTB Bit 0
59
9
CH11 IN
FIRSTPORTA Bit 7
58
8
CH3 IN
FIRSTPORTA Bit 6
57
7
CH10 IN
FIRSTPORTA Bit 5
56
6
CH2 IN
FIRSTPORTA Bit 4
55
5
CH9 IN
FIRSTPORTA Bit 3
54
4
CH1 IN
FIRSTPORTA Bit 2
53
3
CH8 IN
FIRSTPORTA Bit 1
52
2
CH0 IN
FIRSTPORTA Bit 0
51
1
LLGND
PCI slot ↓

PCI-DAS1000 User's Guide Installing the PCI-DAS1000
14
Cables
1
50
2
49
51
100
52
99
10050
511
Key
Key
The red stripe
identifies pin # 1
The red stripe
identifies pin # 51
Cable is labeled
“Pins 51-100”.
Cable is labeled
“Pins 1-50”.
Figure 2. C100FF-x cable
Field wiring and signal termination
The table below lists the MCC screw terminal and signal conditioning boards that are compatible with the
PCI-DAS1000.
Screw terminal and
BNC adapters
http://www.mccdaq.com/products/accessories.aspx
SCB-50
50-conductor, shielded signal connection box.
CIO-MINI50
50-pin universal screw terminal accessory.
BNC-16SE
16-channel single-ended BNC connector box.
BNC-16DI
Eight-channel differential BNC connector box.
CIO-TERM100
16x4 screw terminal.
Signal conditioning
http://www.mccdaq.com/products/signal_conditioning.aspx
ISO-RACK16/P
16-channel isolation module mounting rack.
ISO-DA02/P
Two-channel 5B module rack.
SSR-RACK24*
24-position solid state relay rack.
SSR-RACK08*
Eight-channel solid state relay rack.
CIO-ERB24*
24-channel electromechanical relay accessory for digital I/O boards.
CIO-ERB08*
Eight-channel electromechanical relay accessory for digital I/O boards.
* These devices require the DADP-5037 PCI-DAS to 37-pin SSR and ERB adapter board.

15
Chapter 3
Calibrating the Board
Introduction
Calibrate the board using the InstaCal utility after the board has fully warmed up. The recommended warm-up
time is 15 minutes. For best results, calibrate the board immediately before making critical measurements. The
high resolution analog components on the board are sensitive to temperature. Pre-measurement calibration
ensures that your board is operating at optimum calibration values.
Calibration theory
The PCI-DAS1000 is shipped fully calibrated from the factory with calibration coefficients stored in nvRAM.
When using the Universal Library at run time, these calibration factors are loaded into system memory and are
automatically retrieved each time a different DAC/ADC range is specified.
The analog input circuits are calibrated for both offset and gain (Figure 3).
Offset calibration for the analog input is performed directly on the input amplifier (PGIA) with coarse and
fine trim DACs acting on the amplifier.
For input gain calibration, a precision calibration reference is used with coarse and fine trim DACs acting
on the ADC.
PGIA
Analog In A/D
Trim DAC
Coarse
Trim DAC
Fine
Pre-Gain
Offset
Variable
Gain
Figure 3. Analog input circuit calibration

16
Chapter 4
Specifications
Typical for 25 °C unless otherwise specified.
Specifications in italic text are guaranteed by design.
Analog input
Table 1. Analog input specifications
Parameter
Specification
A/D converter type
7800
Resolution
12 bits
Number of channels
8 differential or 16 single-ended, software selectable
Input ranges
±10 V, ±5 V, ±2.5 V, ±1.25 V, 0 to 10 V, 0 to 5 V, 0 to 2.5 V, 0 to 1.25 V.
Fully programmable
Polarity
Unipolar/bipolar, software selectable
A/D pacing
Programmable: Internal counter or external source (A/D External Pacer, positive or
negative edge selectable by software), or software polled
Burst mode
Software selectable option, rate = 4 µs
A/D trigger sources
External digital (A/D External Trigger)
A/D triggering modes
Digital: Software enabled, rising edge, hardware trigger
Pre-trigger: Unlimited pre- and post-trigger samples. Total # of samples must
be > 512.
Data transfer
From 1024 sample FIFO via REPINSW, interrupt or software polled
A/D conversion time
3 µs
Throughput
250 kHz
Relative accuracy
±1.5 LSB
Differential linearity error
±0.75 LSB
Integral linearity error
±0.5 LSB typ, ±1.5 LSB max
Gain error (relative to
calibration reference)
± 0.02% of reading, max
No missing codes guaranteed
12 bits
Calibration
Auto-calibration, calibration factors for each range stored on board in non-volatile RAM
Gain drift (A/D specs)
±6 ppm/°C
Zero drift (A/D specs)
±1 ppm/°C
Common mode range
±10 V
CMRR @ 60 Hz
70 dB
Input leakage current
200 nA
Input impedance
10 MOhms, min
Absolute maximum input
voltage
Channels 1-15: -40 V to +55 V power on or off;
Channel 0 : ±15 V
Noise distribution
Rate = 1-250 kHz, average % ±2 bins, average % ±1 bin, average # bins
All bipolar ranges: 100% / 99.5% / 4 bins
All unipolar ranges:100% / 99% / 5 bins

PCI-DAS1000 User's Guide Specifications
17
Digital input/output
Table 2. DIO specifications
Parameter
Specification
Digital type
82C55A
Configuration
2 banks of 8, 2 banks of 4, programmable by bank as input or output
Number of channels
24 I/O (FIRSTPORTA 0 through FIRSTPORTC 7)
Output high
3.0 volts, min @ -2.5 mA
Output low
0.4 volts, max @ 2.5 mA
Input high
2.0 volts, min, +5.5 volts absolute, max
Input low
0.8 volts, max, -0.5 volts absolute, min
Power-up / reset state
Input mode (high impedance)
Interrupts
INTA# - mapped to IRQn via PCI BIOS at boot-time
Interrupt enable
Programmable
Interrupt sources
Residual counter, end-of-channel-scan, AD-FIFO-not-empty, AD-FIFO-half-full
Counters
Table 3. Counter specifications
Parameter
Specification
Counter type
82C54
Configuration
Two 82C54 devices. 3 down counters per 82C54, 16 bits each
82C54A:
Counter 0 - ADC residual sample
counter.
Source: ADC Clock.
Gate: Internal programmable source.
Output: End-of-Acquisition interrupt.
Counter 1 - ADC pacer lower
divider
Source: 10 MHz oscillator
Gate: tied to counter 2 gate, programmable source.
Output: chained to counter 2 clock.
Counter 2 - ADC pacer upper
divider
Source: counter 1 output.
Gate: Tied to counter 1 gate, programmable source.
Output: ADC pacer clock (if software selected), available at user
connector.
82C54B:
Counter 0 - pretrigger mode
Source: ADC clock
Gate: external trigger
Output: End-of-Acquisition interrupt
Counter 0 - user counter 4 (when in
non-pretrigger mode)
Source: User input at 100-pin connector (CLK4) or internal 10
MHz (software selectable)
Gate: user input at 100-pin connector (GATE4)
Output: available at 100-pin connector (OUT4)
Counter 1 - user counter 5
Source: user input at 100-pin connector (CLK5)
Gate: user input at 100-pin connector (GATE5)
Output: available at 100-pin connector (OUT5)
Counter 2 - user counter 6
Source: user input at 100-pin connector (CLK6)
Gate: user input at 100-pin connector (GATE6)
Output: available at 100-pin connector (OUT6)
Clock input frequency
10 MHz max
High pulse width (clock input)
30 ns min
Low pulse width (clock input)
50 ns min
Gate width high
50 ns min
Gate width low
50 ns min
Input low voltage
0.8 V max
Input high voltage
2.0 V min
Output low voltage
0.4 V max

PCI-DAS1000 User's Guide Specifications
18
Parameter
Specification
Output high voltage
3.0 V min
Power consumption
Table 4. Power consumption specifications
Parameter
Specification
+5 V operating (A/D converting to FIFO)
0.8 A typical, 1.0 A max
Environmental
Table 5. Environmental specifications
Parameter
Specification
Operating temperature range
0 to 70 °C
Storage temperature range
-40 to 100 °C
Humidity
0 to 90% non-condensing
Main connector and pin out
Connector type
100-pin high density
Compatible cable
C100FF-x, unshielded ribbon cable. x = length in feet
Compatible accessory products
(with C100FF-x cable)
ISO-RACK16/P
ISO-DA02/P
CIO-ERB24 (DADP-5037 adaptor required)
CIO-SERB24 (DADP-5037 adaptor required)
SSR-RACK24 (DADP-5037 adaptor required)
BNC-16SE
BNC-16DI
CIO-MINI50 (2 required)
CIO-TERM100 (1 required)
SCB-50 (1 required)