Insignia NS-LED4W18 User manual

BRIGHT
DIM
PACKAGE CONTENTS
• LED tape light
• Double-sided tape
• Quick Setup Guide
FEATURES
• Premium white LEDs produce bright, natural light
• Multi-step dimmer adjusts to the brightness level you
want
• Self-adhesive backing attaches to TVs, cabinets, or other
spaces for quick, custom lighting
• Reduces eye strain from TVs and monitors while
enhancing image contrast
• Lights powered through USB (on your TV or computer) or
with a USB power adapter (not included)
Before using your new product, please read these instructions to prevent any damage.
USING YOUR TAPE LIGHT
Shortening your tape light
• Use a pair of scissors to cut on a cut line. Cut lines are
about 1.3 in. (3.3 cm) apart.
Warning: Do not cut the silver solder markings. Only cut in the
center of the copper-colored pads, as shown.
Attaching your lights
1Peel the adhesive backing o the lights, then adhere the
lights where you want them.
2Attach the double-sided tape to the back of the light
control, then adhere it where you want it. (optional)
Connecting to power
• Place the tape light where you want it, then connect the
USB connector to your TV, computer, or other USB power
source.
QUICK SETUP GUIDE
LED Tape
Light
NS-LED4W18
USB
connector
Wire
Light
controls
LED
light strip
Cut
line
Brighten lights
Turn on/o
Dim lights
Light controls Cut line

V2 ENGLISH 17-0453
Adjusting the lights
Note: Tape light will retain the last brightness setting used
when turned o, then back on.
• Press (POWER) to turn the tape light on and o.
• Press (BRIGHT) or (DIM) to increase or decrease
the brightness. There are eight light levels.
SPECIFICATIONS
• Input: 5V DC, 1A
Minimum specications for USB power supply (not
included): 5V DC, 0.5A (1.0A or greater recommended)
• Length: 4 ft. (1.2 m)
TROUBLESHOOTING
LEDs will not turn on.
• Press the power button to make sure your light is turned
on, then press (BRIGHT) to increase the brightness.
• Make sure that your lights are connected to a working
USB port or power outlet. If connected to a computer,
turn on your computer.
LEDs icker or turn on and o.
• Make sure that your lights are plugged into a working
power outlet or USB port. Try plugging into a dierent
power source.
• Make sure that the cable is not damaged.
SAFETY INFORMATION
• To avoid damage to the light strip, do not twist or bend
the light strip 90° sharply.
• Do not cut the silver solder markings. Only cut in the
center of the copper-colored pads.
• Do not plug in your lights when they are coiled. This can
generate excess heat which can damage the product or
connected device.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China