Intact SA-2391A User manual

Smart Home Wireless Security IP Camera SA-2391A
Intelligent Network Pan & Tilt Camera
SA-2391A
The cozy and sweet atmosphere here is the best portrayal for it, life has never been so simple.

Standard Optional
do not know where to use it?
1.INCREDIBLE HD IMAGE
Using phone to watch the real 720P HD video, fluency is ahead of the industry. P2P network
penetration reached 99.9%, anywhere of the world can be easily controlled by it at any time. applied
the latest global optimum HD hardware technology and P2P penetration
technology.

2.INCREDIBLE NIGHT VISION
Infrared night vision beyond your imagination, under dark environment, the image is still high
definition, it can discover the minutest details. applies the latest infrared technology, high intensity,
low power consumption, good reliability, long life, wide exposure range and distance.
Clear Images True Color Extremely Shocked Night Performance
3.INCREDIBLE INTELLIGENT ALARM
Best sense ofAlarm push and Wireless access for code technology experience, 8 zones 64 alarms,
door sensor, smoking detection, probe, and infrared detector all can be access.
4.INCREDIBLE INTERCOM AUDIO
Unique sound effects in the field, without any noise. applied the echo cancellation and noise
suppression technologies: a unique audio intercom, clear and smooth voice. 3D Voice engine

technology to enhance voice quality, support echo cancellation and noise suppression technology.
5.INCREDIBLE WIFI ACCESS
WiFi set up is very simple and convenient. No need to plug in the network cable, setting directly
with the remote wizard. It’s industry first, operation is so simple and quick. Phone shake function:
with just a shake, all devices within the LAN can be found, one key added, convenient and
practical. Remote Wizard can also control your home's air conditioner, TV, it’s a good home helper.
6.INCREDIBLE EXPERIENCE
Even if ceiling the camera, the video gravity sensor technology will keep the image 180 degree auto

flip to make sure a very easy installation.
1.INCREDIBLE QUALITY
PCB Anti –oxidizing Gold Emulsion Processing
Others: OSP Processing Easy to be Oxidized
Audio Electric Circuit
Alarm Electric Circuit
Remote Receiver
Timing Button Cell
2.INCREDIBLE CRAFT
The elegant craft design, without any screws for fixture but complete seamless fixed.
3.INCREDIBLE COMPONENTS

2.0mp high-definition camera
4.INCREDIBLE PARAMETERS
Anew generation of high-power lattice 20MILceramic lamp: high intensity, low power consumption,
good reliability, long life, wide exposure range and distance.
1. Mobile phone software operation

For better experience, please download App to your mobile phone software before using this product:
1.1 Mobile phone software download:
IOS clients can search and download "yoosee" from Apple APP Store.
Android user can enter website: http://yoosee.co ,download and install Yoosee Or search "yoosee"
download and install Google play
Also can input http://yoosee.co/ in the explorer to download it in PC，Android version and IOS
version can scan the QR code to download the software directly.
1.2 Mobile phone ID register
Note：first open the “Yoosee”software ，user need register one ID as following:
1) choose the right under “register” to enter
2) choose“mobile phone register”or“email register”，click “next”
3) input email box and password,click “next”( the email register no need verification code, register

it directly; the mobile phone register,the verification code will be sent to the phone by message.)
4) if regist successfully,it will show “congratulations,regist successfully”,and the system will
distribute one ID automatically at the same time.Please remember this ID,it can be used as the
user name ,click “confirm”,input the password you set just now again,then you can log in
normally.
1.3 Mobile phone network connection
There are two ways for connecting device to network：
Wired connection：After the camera power on, connect one end of the cable to the camera, the
other end to the router LAN port (please be sure the router open the DHCP function), the
network light will be normally on after connection successfully.
WIFI connection：the users can follow the below ways if they wants to start using WIFI to get
connection with the camera when the camera is wired connection：
A、please add the devise to the Yoosee device list：“Add device”, please view the fifth part for the
detail steps.
B、open Yoosee software，
1) choose “device”，click device name, choose “settings”；
2) choose “network settings”（please don’t choose “WIFI” directly at the moment ）the
following will search all of the WIFI signal near it automatically, choose your WIFI ID
3) input WIFI password, open wifi successfully.

4) set WIFI by “intelligent online”：details refer to 4、add device on mobile phone
1.4 Add device on mobile phone
How to add the device to device list:
1）、 In the device list interface of the“Yoosee”software，when the camera is in network and the phone
is in the same WIFI,both of them are in one LAN,the software will find all the devices
automatically,and only need choose ,add and set the access password is ok.
2）、 intelligent online：Open the Yoosee software, click “Device”, choose the“+”button, choose
“intelligent online”, click next and then choose the WIFI and WIFI password you need, click the
“next” again, connect the device.

3）、 Add device manually：in the device interface of the Yoosee software,click the “+” ,input ID and
password is ok.
1.5 The device monitor of mobile phone

1）、 contact person：Click the device icon that has been added in device list to entry the monitor
mode.
1.6 The video settings of mobile phone.
1）、 Video：this device supports 128GB TF card in max ,if need record video,please insert the memory
card at first,and then open the Yoosee :click Device ->Device name ->settings->video settings,user
can choose record video manually ,alarm video, timing video.
2）、 playback：this device support playback in mobile phone,open the Yoosee software:click
Device->Device name->playback，user can find the playback files according to the date, then play
it directly .
1.7 Mobile phone zone settings
1. Alarm learning code.
Note：This function is optional, please be sure your device has this function.
This device with 8pcs remote control, 8*8=64pcs wireless alarm (433frequency), support 8 groups.
The following is the learning code ways:
Please add device to device list in Yoosee software.
Click Device->device name->settings->zone settings
Eg: you want to learn one door sensor that installed in the hall, the serial number is 1.Click “Hall”-
click number 1,pop-up:
Click “confirm”，and trigger the alarm you will learn at the same time(take the door sensor as
example,separate the door sensor will trigger the alarm).if match code successfully,the words will be
turn blue from gray,and will pop-up :learn successfully”.

Back to device list interface ,click the right lock key of the device，“ ”means Arming，“ ” means
disarming，the alarm will be effective if mach code successfully after arming 15secs.
“remote caontrol”is special designed for alarm remote control ,the ways of matching code is the
same as “A、B、C”，the function is equal to the right key of the device list in the Yoosee software，
it can be used as “arming,disarming”，but it need match with the device learning .
2. delete match code ：click the access number that had learned,confirm delete is ok.
3. alarm settings：
Arming：there are two ways :one is through the press the infrared remote control arming key(lock
key) that has learned successfully ;two is the arming keys (lock key) in the back of theAPP contact
list, after arming ,when there is a case, the device will send the alert to the APP actively , and send
the scene captured images to the alarm mail at the same time.
Push account,alarm mail:Click on the device name - > settings - > alarm settings: add receiving
alert APP ID in binding account (open Yoosee software,can be found after clicking on the
first"settings" button from right in the lower, can add up to five account), alarm write the receiving
alarm email address.
Motion detecting: alarm as soon as the scene change.
Buzzer: open the buzzer, when have alert the device itself will sirens screaming until "disarming".
1.8 Device upgrading
Click contact names - > Settings - > check device update: click on the new version number,it will
remind the new version number if have the new version ,and the user can choose whether to upgrade

2. The software operation in PC
2.1 Download software to PC
Asking for Newest software from supplier.
2.2 log account in PC
A. there are two ways to log in, select "remote login" ,use the ID ( email/phone number/ Yoosee
account ID) that register in mobile phone to login directly, no need to register again.
B. when the PC software choose “Log on locally ”，the account is：admin password：00000000
2.3 Add device to PC.
How to add device to the device list? In fact, there are many kinds of ways to achieve, specific
methods, please refer to:1）、 In the left side of the "CMS" software interface, click the button ，
input device name and ID and password and click ok:

Make sure your device have already link to the LAN. Normally it will search automatically.

2.4 Device monitor in PC.
Double click device, link to device successfully.

2.5 The video setting in PC.
1) Video: this device can store the video in the computer's hard disk, right click on the monitor
screen ,select "start video" (note: be sure only in the computer monitoring condition ,the video can
be stored in the computer's hard disk)

2) playback：this device can playback the video from computer, open the CMS software，click on
the replay button，choose "playback" , user can find the playback files according to the date, then
play it directly .
(note: the video in computer hard disk only can be played in PC ,does not support playing in mobile )

3) quit out

2.6 Restore the factory default settings
Reset will erase all user Settings: including WIFI information, access password , alarm information,
arming zones information
The steps: Find the reset hole at the bottom of the device, and then use needle to insert it ,press it
more than three seconds after hearing "di" sound ,when hearing the sound like "draw the sword", reset
successfully.