Intella storm 300 RGBW User manual

24PCS

2
CONTENT
INTRODUCTION.......................................................................................................3
DESCRIPTION...........................................................................................................3
SAFETY INSTRUCTIONS .......................................................................................3
DMX-512 control connection ..............................................................................4
DMX-512 connection with DMX terminator...................................................4
OPERATION ...............................................................................................................5
Display Menu ....................................................................................................5
Main functions..................................................................................................6
DMX functions and values ...........................................................................8
CLEANING AND MAINTENANCE.........................................................................9
INSTALLATION .........................................................................................................9
TECHNICAL SPECIFICATIONS............................................................................9

3
INTRODUCTION
Thank you for having chosen our LED lighting
Unpack the device ,inside the box you should find:
The fixture device
One power cable
One XLR connection cable
This manual
Please check carefully that there is no damage caused
by transportation.Should there be any ,consult your dealer and
don’t install this device.
DESCRIPTION
Features
. 16bit dimmer
. Over temperature protect
. 15000lux at 2 meters
. 25degree lens
. Can Set DMX Address by controller
. 4,6,or 9 DMX channels selectable for numerous applications
. DMX-controlled operation or stand alone operation
with Master/Slave-function
. Stepless RGBW colour changing（16bit）
. Color calibrate function
. Equipped with 24 x 12w RGBW 4in1 LED
. Switch-mode power supply, 110v-240v
SAFETY INSTRUCTIONS
This device has left the factory in perfect condition. In order to
maintain this condition and to ensure a safe operation, it
is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.
This device falls under protection-class I. Therefore it is essential that
the device should be earthed.
The electric connection must carry out by qualified person.
If the external flexible cable or cord of this luminaire is damaged,
it shall be exclusively replaced by the manufacturer or his
service agent or a similar qualified person in order to avoid a hazard.
Make sure that the available voltage is not higher than stated at the
end of this manual.

4
Make sure the power cord is never crimped or damaged by sharp edges.
If this would be the case,replacement of the cable must be done by
an authorized dealer.
Always disconnect from the mains, when the device is not in use or before
cleaning it. Only handle the powercord by the plug. Never
pull out the plug by tugging the power cord.
Never look directly into the light source, as sensitive
persons may suffer an epileptic shock.
Important:
Damages caused by the disregard of this user manual are not
subject to warranty. The dealer will not accept liability for any
resulting defects or problems.
DMX-512 control connection
The product has a DMX 512 input fitted with 3-pin XLR connectors.
Screened cables in compliance with EIA RS-485 specifications and the
following characteristics must be used for connections:
- 2 conductors plus screen
- 120Ohm impedance
- low capacitance
- max. transmission rate 250kBaud.
DMX-512 connection with DMX terminator
For installations where the DMX cable has to run a long distance or is in an
electrically noisy environment,such as in a discotheque, it is
recommended to use a DMX terminator. This helps in preventing
corruption of the digital control signal by electrical noise. The DMX
terminator is simply an XLR plug with a 120 OHM resistor connected
between pins 2 and 3,which is then plugged into the output XLR socket of
the last fixture in the chain.

5
OPERATION
Display Menu
Menu 1
Menu 2（Config Menu 1）
Address
DMX Address Setting
Speed
Auto speed setting(00 is fastest)
Auto (Auto mode)
Auto 0 Auto mode 0: fade mode
Auto 1 Auto mode 1:5 color change mode
Auto 2 Auto mode 2:7 color change mode
Audi (Audi mode)
Audi 0 Audi mode 0: fade mode
Audi 1 Audi mode 1: 5 color change mode
Audi 2 Audi mode 2: 10 color change mode
Audi 3 Audio mode 3:stobe with 10 color
Color(Show Color
Mode)
Show Color Mode
Time(Power on time)
Xxxx Time in hour for power on
Color Calibr(Color
Calibrate)
Red
Red Calibrate Mode
Green
Green Calibrate Mode
Blue
Blue Calibrate Mode
Temp(Temperature)
xxxC
Temperature
in ℃
xxx Temperature Calibrate
Config(Parameter
Config)
Channel
mode
Channel5:5Channel mode
Channel7:7Channel mode
Channel10:10Channel mode
Dimmer
mode
Dimmer instant:Light on/off instant
Dimmer delay:Light on/off delay for
0.3sec
Key
mode
Key Lock:Active self lock keboard if no
operation on the button for 30 sec

6
Key Unlock:DisActive self lock keboard
if no operation on the button for 30 sec
DMX
status
Value hold:Hold the DMX status when
no DMX signal
Value clear:light Off when no DMX
signal
Main functions
ⅠAddress:Current DMX address
A.Setting DMX address by button
1. press ENTER button when show the Address menu, then adjust
the DMX address by pressing [UP] or [DOWN] button
Press [ENTER] to confirm or pressing [ESC] to return to main menu.
B.Setting DMX address by controller
1.Set the DMX value of channel 5 to 10-15,channel t to 20-26, channel
7 to 30-36,channel 8 to 40-46,then the devices connected to the
controller will enter to the setting address mode
2. Set the DMX value of channel 1 from 0-59,then you will see the the
first number of the Address change to (channel 1 vaule)/10.
For example,when set the value of channel 1 to 20,the first DMX
address number will be 2(20/10=2) ,
3. Set the DMX value of channel 2 from 0-99,then you will see the the
sencond number of the Address change to (channel 2 vaule)/10.
For example,when set the value of channel 2 to 30,the first DMX
address number will be 2(30/10=3) ,
2. Set the DMX value of channel 3 from 0-99,then you will see the
the third number of the Address change to (channel 3 vaule)/10.
For example,when set the value of channel 1 to 40,the first DMX
address number will be 3(40/10=4) ,
And the DMX address you set by conctroller will be 234.
5. Set the DMX value of channel 4 to 255,then you will save the DMX
address setted by the controller.
Caution: It won’t save the address if the address number is
over 512
6. set the value of channel 5-8 out of the value range show on the step
1,and the device will exit the setting address mode
ⅡSpeed : Auto Run speed
Setting Auto Run speed
press ENTER button when show the Speed menu, then adjust the
speed by pressing [UP] or [DOWN] button,00 is the fasted speed.
ⅢAuto : Auto Run mode
press ENTER button when show the Auto menu, then adjust

7
the mode by pressing [UP] or [DOWN] button
ⅣAudi : Audio Run mode
press ENTER button when show the Audi menu, then adjust
the mode by pressing [UP] or [DOWN] button
ⅤColor: Show color mode
press ENTER button when show the Color menu, then adjust
the color by pressing [UP] or [DOWN] button
6 Hr: Show the time of power on
A:Show time
press ENTER button when show the Time menu ,then you will see
the time of power on .
B: clear the time
press ENTER button when show the Hr menu, and then press up
and down button at the same time for few second,then the time
will be clear to 0000.
7 Color Calibr: Color Calibrate
1. press ENTER button when show the Color Calibr menu, then chose
theRed,Green,Blue calibrate by pressing [UP] or [DOWN] button
2. Press ENTER to enter the color calibrate you chosed, then ajust the
brightness of this color by pressing [UP] or [DOWN] button
3 .Press [ENTER] to confirm or pressing [ESC] to return to main
menu.
8 Temp :Temperature information
A:Show Temperature
press ENTER button when show the Temp menu,and you will see
the temperature of the led in ℃,if there are no temperature
sensor,it will show Err
Notes!
The brightness will decrease gradually when the led
temperature is over 55℃,and if over 70℃,then will black out
B: Temperature Calibrate
press ENTER button when show Temperature, then adjust
the Temperature by pressing [UP] or [DOWN] button to the exact
Temperature
8 Config: Parameter Config
press ENTER button when show the Config menu, then chose
the Parameter by pressing [UP] or [DOWN] button then press enter
A: Channel mode: Chose the Channel mode
Chose the Channle mode by pressing [UP] or [DOWN] button then
press enter to confirm.
B: Dimmer Mode: Chose instant or delay mode
Chose the mode by pressing [UP] or [DOWN] button then press
enter to confirm.In Dimmer instant mode ,the light will be on

8
instant,
and Dimmer Delay mode the light will be on delay for about 0.3
sec
C: Key mode: Chose key self lock function
Chose the mode by pressing [UP] or [DOWN] button then press
enter to confirm.chose key lock will active key self lock
function,the button will be locked if no operation to any of the
buttons for about 30 sec ,press any button for about 3sec will
active the button again
and chose Unlock will disactive the key self lock function
D: DMX status: Status of DMX signal
Chose the mode by pressing [UP] or [DOWN] button then press
enter to confirm. Hold is holding the last DMXsignal mode,the
device will hold the last DMX signal while there no DMX signal
and chose clear will not hold the last signal and turn off the device
while there is no DMX signal
DMX functions and values
Channel mode
Values
Functions
4CHs
6CHs
10CHs
1
1
0-255
Master Dimmer (0-100%)
1
2
2
0-255
Red (0-100%)
2
3
3
0-255
Green (0-100%)
3
4
4
0-255
Blue (0-100%)
4
5
5
0-255
White(0-100%)
6
6
0-7
null
8-255
Strobe (From slow to fast)
7
0-9
Null
10-19
red
20-29
Green
30-39
Blue
40-49
White
50-59
Yellow
60-69
Magenta
70-79
Cyan
80-89
RGB
90-95
ALL ON
96-127
Macro1
128-159
Macro2
160-191
Macro3

9
192-255
Macro4
8
0-255
Speed of macos(slow to fast)
9
0-255
Speed of dimmer(fast to slow)
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft
lint-free and moistened cloth. Never use alcohol or solvents!
CAUTION!
Disconnect from mains before starting maintenance
operation.
There are no servicable parts inside the device. Maintenance and
service operations are only to be carried out by authorized dealers.
If you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be
replaced by authorized dealers only in order to avoid hazards.
If you have further questions, please contact your dealer.
INSTALLATION
The device must only be installed at a vibration-free, oscilation-free
and fire-resistant location.
TECHNICAL SPECIFICATIONS
Power supply: 100V~240V AC，50 Hz /60Hz
Power consumption: max. 300 W
Waterproof grade: IP 44/IP65
Packing dimensions: 280x500x520mm
Net weight:8 KGS Gross weight:8.5KGS

INTELLA SYSTEM
A/S. #6 Youyi Road, Yongping Street, Baiyun District, Guangzhou, CHINA
[e-mail]/in[email protected]/www.intellasystem.co
m
TEL. [phone]. FAX. [phone]