At the initial access to the
“Connection Type” page, the
web browser will ask for a new
plug-in installation, the plug in
being Network Camera. This
plug-in has been registered for
certification and can be used to
change the parameters at the
client’s site. The user may click
on to install the plug-in. If the
web browser does not allow the
user to complete the installation,
check the Internet security in
order to set on your web
browser to “Ask confirmation for
download ActiveX control
without electronic Signature”
and so refresh the current web
page. If the problem persist
please contact your IT or
networking supervisor.
IT401 - IT501 Quick Start Guide
7
Intellisystem Technologies - http://www.intellisystem.it
