intensity RM02A User manual
WIRELESS REMOTE
CONTROLLER
MAN-O-RCVRF-0615
intensity.mx
OPERATION MANUAL
RM02A/BGE-A
The outline figure on cover is for reference only,
which may differ from what you purchased.
Make sure to read chapter PRECAUTIONS
before you operate the air conditioner.
This manual is available for model
RM02A/BGE-A and RM02A/BGE(T)-A.
RM02A/BGE-A and RM02A/BGE(T)-A can be
applicable for cool&heat type air conditioners.
CONTENTS
1 Safety Precautions.............................................................
2 Model And Specification.....................................................
3 Buttons And Their Functions...............................................
4 Names Of Indicators And Their Functions..........................
5 Operation Instructions.........................................................
6 Precautions.......................................................................1
Install And Replace Batteries.............................................
Auto Operation...................................................................
Dry/fan/cool/heat Operation...............................................
Other Functions Operation................................................
TimerOperation..............................................................1
The following contents are stated on the product and the operation
manual, including usage, precautions against personal harm and
property loss, and the methods of using the product correctly and
safely. After fully understanding the following contents (identifiers
and icons), read the text body and observe the following rules.
Identifier description
Identifier Meaning
Means improper handling may lead to
personal death or severe injury.
[Note]: 1. “Harm” means injury, burn and electric shock which
need long-term treatment but need no hospitalization.
2. “Property loss” means loss of properties and materials.
Warning
Caution Means improper handling may lead to
personal injury orporperty loss.
Icon description
Meaninglcon
It indicates forbidding. The forbidden subject-matter is
indicated in the icon or by images or characters aside.
It indicates compulsory implementation. The compulsory
subject-matter is indicated in the icon or by images or
characters aside.
Warning
Please entrust the distributor or profession-
als to install the unit. The installers must
have the relevant know-how. Improper
installation performed by the user without
permission may cause fire, electric,shock,
personal injury or water leakage.
Delegate
installation
Forbid
Forbid
Usage
Warning
Do not spray flammable aerosol to the wire
controller directly. Otherwise, fire may occur.
Do not operate with wet hands or let water enter
the wire controller. Otherwise, electric shock may
occur.
I. Safety Precautions
3
2. Model And Specification
Model
Rated voltage
Effective receiving distance
Operation condition
3.0V(2 pieces of LR03 7# batteries)
RM02A/BGE-A RM02A/BGE(T)-A
2.0V
8m(Where is 3.0V,that will be 11m)
-5~60°C
Min voltage for sending
signal of CPU
3. Buttons And Their Functions
ECONOMIC
OPERATION
ON/OFF
ADJUST
TIMER
26°C
MODE
FAN
SPEED
HORIZ SWING
VERT SWING
Remote signal
emission terminal
STRONG
DISPLAY
DRY·AUXILIARY HEAT
FOLLOW ME
ON OFF
MODE
FAN
SPEED
TURBO
LED DISPLAY
TEMP
SET
TIMER
ECO
DRY E
FOLLOW ME
FAN DIRECTION
RM02A/BGE-A
AUTO
COOL
DRY
HEAT
FAN
TIMER OFF
TIMER ON
FOLLOW ME
TEMP
FAN SPEED FOLLOW ME
SLEEP
MODE
12
4
5
7
9
3
6
8
10
12
11
4
Fig.3-1
: Decrease the set temp. Keeping pressing will
decrease the temp with 1per 0.5s.
HORIZ SWING: Activate or turn off wind horizontal
swing function. (Only available when remote controller
is used with corresponding unit.)
26°C: Press this button, can operate the cool mode with the
setting temperature 26°C.
TIMER
ADJUST
ADJUST
ON/OFF: For turning on or turning off the air conditioner.
ECO: Activate or turn off economic operation mode.
Increase the set temp. Keeping pressing will
increase the temp with 1per 0.5s.
DRY HEAT FAN
AUTO COOL
MODE: Once pressing, running mode will be selected in the
following sequence:
FAN SPEED:
Under the OFF state, press this button, TIMER ON are ligtened.
continue to press TIMER button, the time will increase by 0.5
hour. When the set time exceeds 10 hours, pressing TIMER button
will increase the time by 1 hour.Adjust the TIMER ON to be “0:00”
then can cancel the TIMER ON.
Under the ON state, press this button, TIMER OFF are ligtened.
and continue to press TIMER button, the time will increase by 0.5
hour. When the set time exceeds 10 hours, pressing TIMER button
will increase the time by 1 hour.Adjust the TIMER OFF to be “0:00”
then can cancel the TIMER OFF.
Fan speed will be selected in following sequence once press-
ing this button: (Under the DRY and AUTO mode (except for
the auto heat recycling mode), the fan speed will be fixed and
can not be adjusted. Under the auto heat recycling mode, the
fan speed will be automatically and can be adjusted.)
VERT SWING: Activate or turn off wind vertical swing
function. Under the power off state, this button will not work.
(Only available when remote controller is used with
corresponding unit.)
5
STRONG
Press this button, set the air conditioner to operate as strong
mode, and the frequency will be raised, press again will cancel
this mode. (Only available when remote controller is used with
corresponding unit.)
DRY·AUXILIARY HEATFOLLOW ME
Press the left of the button when it is operating the dry cleaning
function, will close the dry cleaning function; press the right of
the button when it is operating follow me function, will close the
follow me function.(Only available when remote controller is
used with corresponding unit.)
11
DISPLAY
When the air conditioner is on the ON state, press this button,
can close (open) the modules display, press again will open
(close) the display. (Only available when remote controller is
used with corresponding unit.)
12
4. Names Of Indicators And Their
Functions
AUTO
COOL
DRY
HEAT
FAN
TIMER OFF
TIMER ON
FOLLOW ME
TEMP
FAN SPEED FOLLOW ME
SLEEP
MODE
ON/OFF
Lock
Timer ON/OFF
Running
mode
Temperature
Fan speed
Transmitting
display
Follow Me
Transmitting display: The icon will flash once when the signal is
sent by remote controller.
ON/FF: Icon is displayed when the remote controller is turned
on, or vice versa.
Running mode: Press MODE to display current running mode. AUTO,
COOL, DRY, HEAT and FAN can be selected.
6
Fig.4-1
Timing ON/OFF
When adjusting timing ON state or only the timing ON function
has been set, the “Timing ON” will be displayed; when adjust-
ing timing OFF state or only the timing OFF function has been
set, the “Timing OFF” will be displayed.
Lock
Press MODE and TIMER button for 5s
simultaneously
,
lock
icon will be displayed;Press buttons again,the icon disappears.
Temperature
Display the set temperature. Adjust temperature via “ ”.
No display in this area if the unit is on FAN mode.
Follow Me:
Under the cool, heat, auto mode operation state, press the
right of “FOLLOW ME” button, the follow me
icon will be displayed, and press again the icon will be disap-
peared.
Fan speed
Press FAN SPEED to display the current wind speed.
AUTO, LOW, MED and HIGH can be selected. The default
state is high fan speed for the unit without medium fan speed.
CAUTION
All the above icons are listed for instruction, and the relative
items will be dispalyed when operation. And all the icons will be
displayed when the remote controller is electrified for the first
time or reset.
5. Operation Instructions
Install and Replace Batteries
1. Install 2 pieces of 7# alkaline batteries.
2. Slide the cover to install batteries and make sure to place them
in right pole.
7
5.2 Auto Operation (Normal)
AUTO operation
AUTO
FAN SPEED
Lighting
Running
Lighting
TEMP
SET
MODE ON/OFF
Press MODE to select AUTO.
Adjust temp via and . Generally the range is 17~30 .
Press ON/OFF and running indicator light on indoor unit is
lightened. Air conditioner will work on AUTO mode and fan
speed is AUTO, the display screen on remote controller will
display “AUTO”, then the fan speed is adjustable. And press
ON/OFF again, the air conditioner will be stopped.
1.
2.
5.3 Dry/fan/cool/heat Operation
FAN SPEED
Lighting
Running
Lighting
DRY
FAN SPEED
Lighting
Running
Lighting
FAN
FAN SPEED
Lighting
Running
Lighting
COOL
HEAT
DRY/FAN/COOL/HEAT OPERATION
TEMP
SET
MODE
FAN
SPEED ON/OFF
4
DRY FAN COOL
FAN SPEED
Lighting
Lighting
Running Electric heating
Press MODE to select COOL, DRY, HEAT or FAN.
Adjust temp via and . Generally the range is
17~30 .
Press FAN SPEED to select AUTO, LOW, MED or HIGH.
Press ON/OFF and running indicator light on indoor unit
is lightened. Air conditioner will work on the set mode.
Stop operation via ON/OFF.
1.
2.
3.
4.
8
Fig.5-1
Fig.5-2
3.
CAUTION
“FAN” operation can not set the temperature, when select this
operation only can do 1,3,4 steps.
“DRY” operation can not set the fan speed, when selsect this
operation only can do 1,2,4 steps.
5.4 Other Functions Operation
Dry function
Follow me function
Function instruction
Stop operation
Function instruction
DRY
Lighting
DRY E
FOLLOW ME
This air conditioner has dry function,
close the unit under the cool and dry mode,
the air conditioner will operate the dry func-
tion automatically, then the icon will be light-
ened. For cool-only model, the air condi-
tioner will Low operate with fan mode for 10
mins and then close the unit automatically.
If you want to stop the dry function, can presss the left of “DRY
FOLLOW ME” under the function is operating, then
can stop the function, and the icon will be off.
This air conditioner has follow me function,
when this function is operated, the remote
controller will detect the temperature near the
remote controller and compare with the temperature you set
atuomatically, and controll the operation of the air conditioner
according to the contrastive result, and make the temperature
near the remote controller reaches the setting temperature.
This function is valid only under COOL, HEAT, AUTO mode
and the unit has follow me function.
The remote controller can not be placed near the heat source
or low temperatue source, otherwise will affect its tempera-
ture gathering precision and then affect the follow me func-
tion.
DRY E
FOLLOW ME
9
Fig.5-3
Fig.5-4
Energy-saving function
Function instruction
Function instruction
Strong operation function
Lighting
Running Turbo
TURBO
When operating cooling, press
the “TURBO” button and
operate the strong cooling
operation, at the same time raise the frequency,
press again will close the strong operation.
This function is invalid under operating sleep function.
When operating COOL/AUTO, press the “ECO” button, and
operate power save function; press again will cancel the
function.
Under the DRY/FAN mode, this function is invalid.
Under power save state, press “MODE”,”ON/OFF” or “FAN”
button will cancel this function.
Display function
Function instruction
For avoiding the display light of the indoor unit will affect
customer’s rest, this unit has special display funtion.
When the air conditioner is operated, press the “DISPLAY”
button, then can close(open) the module display,
press again can open (close) the display.
Function instruction
Press the “MODE” and “TIMER”button at the same time and
last over 5s, then can operate locking the remote controller.
In locked state, all the buttons are ineffective.
Press the “MODE” and “TIMER”button again at the same time
and last over 2s, then can close the locking.
Function instruction
Press “26°C” on the remote controller can operate
the cooling operationg mode with the setting
temperature of 26°C.
26°C green function
Lock function
10
Fig.5-5
Fig.5-6
Auto heat recycling mode function
CAUTION
5.4 Other functions operations only available when the indoor
unit has corresponding functions.
11
Example:
°C, Ts is 25°C.
when Tf-Ts>=
operated according to the setting fan speed.
when Tf-Ts<=
operated according to the setting fan speed.
Note
:
This function operations only available when the indoor
unit is in the heat recycling three-pipe system.
When the remote controller selects the auto heat recycling-
mode, the remote controller position must be placed at the signal
receiving range of the air conditioner.
When the remote controller detects changes of the mode(cool
to heat,or heat to cool), it will send the changes to air conditioner.
One beep of air conditioner changed mode signals is giving out.
Function
instruction
Temperature difference, means the different temperature
between the indoor temperature (Tf) detected by the remote
controller and the remote controller setting temperature (Ts).
(the default difference is 3°C, the difference range is 1~4°C)
SW1 definition
Auto Mode (Normal)
SW1
SW1
Auto heat recycling Mode
TEMP
SET
press and buttons for 5S simultaneously,
TEMP
SET
ON/OFF
FAN SPEED
press or button
press ON/OFF button
confirm and exit the setting
instruction
5.5 Timer Operation
TIMER TIMER
Timing Setting
TIMER ON TIMER ON
FAN SPEED
COOL
FAN SPEED
COOL
FAN SPEED
COOL
TIMER ON
Setting timing ON
Under the remote controller is OFF, press the “TIMER” button,
then the remote controller will display the timing ON icon and
number display area will show up last timing ON time, and will
display icon “h”. The remote controller enters to the timing ON
adjusting state.
(Continue) Press “TIMER” button, then can adjust the timing
ON time to what you want.
After adjustment, the remote controller transmit the timing ON
signal, and after 5s the icon “h” will be disappeared, and the
number display area will back to display temperature, then
finish the timing ON setting.
1.
2.
3.
Under the remote controller is ON, press the “TIMER” button,
then the remote controller will display the timing OFF icon and
number display area will show up last timing OFF time, and will
display icon “h”. The remote controller enters to the timing OFF
adjusting state.
(Continue) Press “TIMER” button, then can adjust the timing
OFF time to what you want.
After adjustment, the remote controller transmit the timing OFF
signal, and after 5s the icon “h” will be disappeared, and the
number display area will back to display temperature, then
finish the timing OFF setting.
1.
2.
3.
Setting timing OFF
TIMER TIMER
FAN SPEED
COOL
FAN SPEED
COOL
FAN SPEED
COOL
TIMER OFF TIMER OFF TIMER OFF
1
Fig.5-7
Fig.5-8
Check the preset time of timing: press the corresponding
timing button once, then will display the timing time.
Change the timing ON or OFF time: press the corre-
sponding timing button, then reset timing ON or OFF
time.
Cancel the timing: adjust the timing ON or OFF time to
be 0.
Timing the time to be relative time, that relate to the time
which later than the standard time of operating the
remote controller.
Under the remote controller is ON, only can set timing
OFF; under the remote controller is OFF, only can set
timing ON.
6. Precautions
Curtain, door or the like objects will prevent the remote signal
from being received by air conditioner.
Do not get the interior of remote controller wet. It is forbidden
to expose it to direct sunlight or locate it in the place with high
temp.
Malfunction may occur if infrared signal receiver on air condi-
tioner is exposed to sunlight. Please shelter the signal
receiver from sunlight with curtain.
Please remove the nearby electronic device for they may
affect the performance of remote controller.
Do not put the used or different batteries into the remote
controller, otherwise remote controller will fail to send signal.
Please remove the batteries before long period unused, oth-
erwise the remote controller may be damaged.
If pressing the button reset the remote controller, which indi-
cates low battery, please replace the batteries.
If no receiving sound is heard from indoor unit or on
remote controller does not flash, please replace the batteries.
Effective transmitting distance of remote controller is 8m,
please aim the signal sending part to the receiver on air con-
ditioner.
1
This manual suits for next models
1
Table of contents
