Interactive Worldwide Alarm SNH1300 User manual

Add-On Device Quick Start Guide
All WWAlarm add-on devices have to work with WWAlarm systems
Fire Sensor
Add-on Device
Quickstart Guide
Model No. SNH1300
What’s inside:
1x Battery
(CR123A)
1x Fire Sensor
Mounting
Accessories
2x Double-Sided
Tapes

Add-On Device Quick Start Guide
Step 1: Assemble your device and accessories
1 . Unpack your device and accessories.
2. Pair the device with the Security Shuttle within 1-10
feet to make sure the connection is working well.
3. Unlock Fire Sensor from the Mounting base by
holding the base firmly and rotating the sensor
counter-clockwise. Remove the battery
compartment cover and insert a battery.
Reattach the cover.
1-10 ft
Mounting base
Battery LED TEST button

Add-On Device Quick Start Guide
Step 2: Add a device
1 . Open the WWAlarm app, tap on the the menu button
" " and select “Device Management”.
2. Press the add button ‘+’ next to Sensor List.
3. Follow the app instructions to scan the QR code
located on the device.
Note: If the scan is incomplete, you will be asked to enter the serial number
(SN) of the device.

Add-On Device Quick Start Guide
Step 3: Place your device
1 . Take your device to the room you want to use it in.
2. Test the device by pressing and holding the TEST
button for 3 seconds. The LED should blink.
3. If you receive a push notification saying "sonic
detected", it's within range.
4. Mount your device within 1 foot or 30cm to your
existing Smoke/CO detector.
Within 1 Foot
or 30cm
Smoke/CO Detector
(UL217 or UL2034 Compliant)
Before you mount your device, see if it's within
Security Shuttle’s range.