Intercon TA-BR-6310LF-RVR/SSH-C User manual

Size of Mattress (for UPPER Bunk, Twin)
1. Follow the information on the warning appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed.
2. Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.
3. Surface of mattress must be at least 5 inches below the upper edge of the guardrails.
4. Do not allow children under 6 years of age to use the upper bunk.
5. Prohibit more than one person on upper bunk.
6. Periodically check and ensure that the guardrail, ladder,and other components are in their proper
position, free from damage, and that all connectors are tight.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Alway use the ladder for entering and leaving the upper bunk.
9. Do not use any substitute parts. Contact manufacturer or dealer for replacement parts.
10. Use of a night light may provide added safety precaution for a child using the upper bunk.
11. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed
should be placed against the wall to prevent entrapment between the bed and the wall.
12. Always use guardrails on both long sides of the upper bunk.
13. The use of water or sleep flotation mattress is prohibited.
14. Keep these instructions for future reference.
15. Strangulation Hazard-Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed: for example, but not limited to, hooks, belts, and jump ropes.
SAFETY WARNING !
Replacement Parts
Replacement parts, including additional guardrails, may be obtained from place of purchase or Original
distribution
Replacement Parts
Keep all instruction sheets for future reference to assemble bed for moving and/or different set up.
ASSEMBLY INSTRUCTIONS
Page 1 of 8
DESCRIPTION: TAHOE BUNK BED
MADE IN VIET NAM
This bed is designed to use a twin mattress 38" to 38.5" wide x 74" to 75" long with the total thickness
not exceeding 8” for upper bunk. Do not use mattress without the proper slat system and proper
attachments described in the instructions. NOTE: there must be at least 5 inches from the top
surface of the mattress to top edge of guardrail.

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small Hardware which may have come
loose inside the carton during shipment.Identify and count all Hardware and compare with the Hardware List Below.
TAHOE TWIN OVER FULL BUNK BED
Item No: TA-BR-6310LF-RVR/SSH-C
TA-BR-6360FB-RVR/SSH-BSE
TA-BR-6360TB-RVR/SSH-TOP
TA-BR-6360-RVR/SSH-RS
MADE IN VIET NAM
Page 2 of 8
ASSEMBLY INSTRUCTIONS
TAHOE BUNK BED SERIES
TAHOE TWIN BUNK BED
Item No: TA-BR-6310LT-RVR/SSH-C
TA-BR-6360TB-RVR/SSH-BSE
TA-BR-6360TB-RVR/SSH-TOP
TA-BR-6360-RVR/SSH-RS
Size of Mattress
This bed is designed to use a twin mattress
38" to 38.5" wide x 74" to 75" long with
the total thickness not exceeding 8" for
upper and lower bunk.
Size of Mattress (for UPPER Bunk, Twin)
This bed is designed to use a twin mattress
38" to 38.5" wide x 74" to 75" long with
the total thickness not exceeding 8" for
upper bunk.
Size of Mattress (for LOWER Bunk, Full)
This bed is designed to use a full mattress
53.5" to 54" wide x 74" to 75" long with
the total thickness not exceeding 8" for
lower bunk.

TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
PART LIST
2 PCS
Qty.
Description
2 PCS
Drawing
Lower Twin Bunk Bed Ends
TA-BR-6360TB-RVR/SSH-BSE
Bed Side Rails
TA-BR-6360-RVR/SSH-RS
Full Bed Slat 1 SET
Page 3 of 8
HARDWARE LIST ( FOR TA-BR-6360FB/6360TB-RVR/SSH-BSE )
Qty.
No. Description Size
Drawing
1
2
4 PCS
Metal Dowel M12 x 100mm
HARDWARE LIST ( FOR TA-BR-6310LF/6310LT-RVR/SSH-C )
Qty.
No. Description Size
Drawing
Bolt 5/16" x 85mm 6 PCS
7
D-nut 5/16" x 15mm
1 PC
8
M4
2 PCS
9
8 PCS
10
Allen Key
Bolt 5/16" x 35mm
1 PC
Metal Plate 160 x 25 x 3.5mm
11
10 PCS
Screw M4 x 20mm
12
Upper Twin Bunk Bed Ends
TA-BR-6360TB-RVR/SSH-TOP
Long Guard Rail
TA-BR-6310LF-RVR/SSH-C
TA-BR-6310LT-RVR/SSH-C
1 PC
Short Guard Rail
TA-BR-6310LF-RVR/SSH-C
TA-BR-6310LT-RVR/SSH-C
1 PC
Ladder
TA-BR-6310LF-RVR/SSH-C
TA-BR-6310LT-RVR/SSH-C
1 PC
4 PCS
ASSEMBLY INSTRUCTIONS
DESCRIPTION: TAHOE BUNK BED
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small Hardware which may have come
loose inside the carton during shipment.Identify and count all Hardware and compare with the Hardware List Below.
26 PCS
Wood Screw M4 x 30mm
HARDWARE LIST ( FOR TA-BR-6360TB-RVR/SSH-TOP )
Qty.
No. Description Size
Drawing
3
4
2 PCS
Bolt 5/16" x 35mm
2 PCS
D-nut 5/16" x 15mm
526 PCS
Wood Screw M4 x 30mm
HARDWARE LIST ( FOR TA-BR-6360-RVR/SSH-RS )
Qty.
No. Description Size
Drawing
13
14
16 PCS
Bolt 5/16" x 85mm
16 PCS
Barrel Nut 5/16" x 15mm
15 1 PC
Allen Key M4
Lower Full Bunk Bed Ends
TA-BR-6360FB-RVR/SSH-BSE 2 PCS
Twin Bed Slat 1 SET
No.
A
B
C
D
E
F
G
H
I
C
A
EI
TA-BR-6310LF-RVR/SSH-C
D
F
G
HTA-BR-6310LT-RVR/SSH-C
H
DI
B
A
G
D
F
MADE IN VIET NAM
1 PC
M4
6Allen Key

Page 4 of 8
CAUTION: Do not attempt to move
the bed when fully assembled. This
could result in damage to the rails,
headboard, or footboard.
ASSEMBLY INSTRUCTIONS
ITEM NO: TA-BR-6360TB-RVR/SSH-BSE / TA-BR-6360FB-RVR/SSH-BSE
TA-BR-6360TB-RVR/SSH-TOP / TA-BR-6360-RVR/SSH-RS
DESCRIPTION: TAHOE BUNK BED
13
15
14
I
A, B or C
Step 1
Step 2
D or E
2 or 5
MADE IN VIET NAM

Page 5 of 8
CAUTION: Do not attempt to move
the bed when fully assembled. This
could result in damage to the rails,
headboard, or footboard.
ASSEMBLY INSTRUCTIONS
ITEM NO: TA-BR-6360TB-RVR/SSH-TOP / TA-BR-6310LF-RVR/SSH-C
TA-BR-6310LT-RVR/SSH-C / TA-BR-6360-RVR/SSH-RS
DESCRIPTION: TAHOE BUNK BED
MADE IN VIET NAM
7
9
8
8
10
9
3
4
6
12
Step 3
Step 4
Step 5
Step 6
A
F
G

Page 6 of 8
ASSEMBLY STEP TWIN BED TOP
1
TWIN OVER FULL BUNK BED
TWIN BUNK BED
MADE IN VIET NAM
Step 7
ASSEMBLY INSTRUCTIONS
ITEM NO: TA-BR-6360TB-RVR/SSH-TOP / TA-BR-6360FB-RVR/SSH-BSE
TA-BR-6360TB-RVR/SSH-BSE / TA-BR-6310LF-RVR/SSH-C
TA-BR-6310LT-RVR/SSH-C / TA-BR-6360-RVR/SSH-RS
DESCRIPTION: TAHOE BUNK BED

Page 7 of 8
ASSEMBLY STEPS BED LADDER
ASSEMBLY INSTRUCTIONS
ITEM NO: TA-BR-6360TB-RVR/SSH-TOP / TA-BR-6360FB-RVR/SSH-BSE
TA-BR-6310LF-RVR/SSH-C / TA-BR-6360-RVR/SSH-RS
DESCRIPTION: TAHOE BUNK BED
12
11
TA-BR-6310LF-RVR/SSH-C
MADE IN VIET NAM
Step 8
H

Page 8 of 8
ASSEMBLY STEPS BED LADDER
MADE IN VIET NAM
ASSEMBLY INSTRUCTIONS
ITEM NO: TA-BR-6360TB-RVR/SSH-TOP / TA-BR-6360TB-RVR/SSH-BSE
TA-BR-6310LT-RVR/SSH-C / TA-BR-6360-RVR/SSH-RS
DESCRIPTION: TAHOE BUNK BED
12
11
Step 9
TA-BR-6310LT-RVR/SSH-C
H