Furniture of America Menodora CM7311Q User manual

2) Align HB support (#3) to the
holes of the HB legs (#2R/L).
Secure by usign bolts (#B) Fully
tighten all bolts (#A,B).
1) Prepare 22 bolts assembly by inserting lock
washer (#C), then flat washer (#D) onto bolts
(#A,B). Align HB legs (#2R/L) to the holes of
the headboard (#1). Secure by using bolts
(#A,B). Do not fully tighten.
Attach threaded bolts (#F) to the headboard (#1) and footboard
(#4). Align side rails (#5) to the threaded bolts (#F), then
secure by using hex nut (#G).

Attach support legs (#7) to the holes of the slats (#6), then
adjust leveler on the support legs (#7) according to ground
level.
Align slats to the side rails (#5), then secure by using screws (#K).

2) Align HB support (#3) to
the holes of the HB legs
(#2R/L). Secure by usign
bolts (#B) Fully tighten all
bolts (#A,B).
1) Prepare 22 bolts assembly by inserting lock
washer (#C), then flat washer (#D) onto bolts
(#A,B). Align HB legs (#2R/L) to the holes of
the headboard (#1). Secure by using bolts
(#A,B). Do not fully tighten.
Attach threaded bolts (#F) to the headboard (#1) and
footboard (#4). Align side rails (#5) to the threaded bolts
(#F), then secure by using hex nut (#G).

Attach support legs (#7) to the holes of the slats (#6), then adjust
leveler on the support legs (#7) according to ground level.
Align slats to the side rails (#5), then secure by using screws (#K).

1) Prepare 22 bolts assembly by inserting
lock washer (#C), then flat washer (#D)
onto bolts (#A,B). Align HB legs (#2R/L)
to the holes of the headboard (#1). Secure
by using bolts (#A,B). Do not fully tighten.
2) Align HB support (#3) to
the holes of the HB legs (#2R/
L). Secure by usign bolts (#B)
Fully tighten all bolts (#A,B).
Attach threaded bolts (#F) to the headboard (#1) and footboard (#4).
Align side rails (#5) to the threaded bolts (#F), then secure by using
hex nut (#G).

Attach support legs (#7) to the holes of the slats (#6),
then adjust leveler on the support legs (#7) according
to ground level.
Align slats to the side rails (#5), then secure by using screws (#K).