IonGear UpStream GUV302G User manual
1
Package Contents
UpStream™Tarjeta de captura de juegos 4K
www.iogear.com
Quick Start Guide
Guide de Démarrage Rapide
Guía de Inicio Rápido
UpStream™4K Game Capture Card
UpStream™Carte de capture de jeu 4K
GUV302G
PART NO. Q1666
3
Table of Contents
Package Contents 4
System Requirements 5
Product Overview 6
Hardware Installation 7
Software Installation 8
Operation 10
Limited Warranty 12
Contact 13
Compliance Information 14
Contenu de l'emballage 16
Conguration Système Requise 17
L’aperçu du Produit 18
Installation du Matériel 19
Instalación de Software 20
Operation 22
Garantie limitée 24
Contact 25
Information de Conformité 26
Contenido del paquete 28
Requerimientos del Sistema 29
Descripción del Product 30
Instalación del Hardware 31
Installation du Logiciel 32
Operación 34
Garantía limitada 36
Contacto 37
Información de Conformidad 38
4
Package Contents
• 1x GUV302G
• 1x USB-C to A cable
• 1x 3.5mm Audio cable
• 1x Quick Start Guide
5
System Requirements
• Windows®10 w/ UVC support
• Mac OS X (10.2.x or later) w/ UVC support
• One available USB-A port, USB 3.1 is required for 4K Capture.
• Desktop:
Intel®Core™ i5 6xxx above + NVIDIA GeForce GTX 1060 and above
• Laptop:
Intel®Core™ i7-7700HQ above + NVIDIA GeForce GTX 1050 Ti and above
• RAM:
8GB or higher
6
Product Overview
Front View
A. USB-C output port for host computer
B. 3.5mm port for console gamepad
C. 3.5mm port for Headset
Rear View
D. HDMI input port for Game console or video source
E. HDMI passthrough port for monitor or display
A
B
C
D
E
7
Hardware Installation
1
3
2
4
5
1. Connect the USB-C output port of the GUV302G to a Host Desktop or
Laptop using the included USB-C to A cable
2. Connect an HDMI source to the HDMI input port on the GUV302G
3. Connect an HDMI display to the HDMI passthrough port on the GUV302G
4. Connect a Console Gamepad using the included 3.5mm to the Console
3.5mm port on the GUV302G
5. Connect a Headset to the 3.5mm Headset port on the GUV302G
8
Software Installation
Audio Tool Installation (Windows)
1. Download GUV302G_Audiotool_win_v1.16.5.zip from www.iogear.com
2. Unzip folder and run AudioController.exe
3. Audio Controller is active when icons are showing green.
9
Software Installation
Audio Tool Installation (Mac)
1. Download GUV302G_Audiotool_Mac_v1.16.8.zip from www.iogear.com
2. Unzip folder and run Audio_controller_v1.16_8
3. Audio Controller is active when icons are showing green.
10
Operation
Input Audio
• Controls audio volume connected from Console gamepad
• GREEN: Active
RED: Inactive
Orange slider: Move slider to control volume.
Earphone
• Controls headset output audio
• GREEN: Active
RED: Inactive
Orange slider: Move slider to control volume.
MIC
• Controls MIC / headset input audio volume to host computer
• GREEN: Active
RED: Inactive
Orange slider: Move slider to control volume.
11
Operation
Standby Mode Working Mode
Plugged in Purple(1 sec) N/A
USB 3.0 Blue Blue ashing
USB 2.0 Orange Orange ashing
HDCP Protected N/A Purple ashing
No Video Blue and Orange ashing Blue and Orange ashing
Not Supported N/A Purple ashing
FW Update Orange ashing N/A
LED Behavior
12
Limited Warranty
Warranty Information
This product carries a 1 Year Limited Warranty. For the terms and conditions of
this warranty, please go to https://www.iogear.com/support/warranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model _____________
Serial Number _____________
13
Contact
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
support@iogear.com
www.iogear.com
14
Compliance Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
service, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. Any changes
or modications made to this equipment may void the user’s authority to operate this
equipment. This equipment generates, uses, and can radiate radio frequency energy. If
not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
FCC Caution: Any changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CE Statement:
This device has been tested and found to comply with the following European Union
directives: Electromagnetic Capability (2004/108/EC), Low Voltage (2006/95/EC) and
R&TTED (1999/5/EC).
16
Contenu de l'emballage
• 1x GUV302G
• 1x câble USB-C vers A
• 1 x câble audio 3,5 mm
• 1 x Guide de Démarrage Rapide
17
Conguration Système Requise
• Windows®10 avec prise en charge UVC
• Mac OS X (10.2.x ou version ultérieure) avec prise en charge UVC
• Un port USB-A disponible, USB 3.1 est requis pour la capture 4K.
• Ordinateur de bureau: Intel® Core™ i5 6xxx supérieur + NVIDIA GeForce
GTX 1060 et supérieur
• Ordinateur portable: Intel®Core™ i7-7700HQ supérieur + NVIDIA GeForce
GTX 1050 Ti et supérieur
• RAM: 8 Go ou plus
18
L’aperçu du Produit
Vue de Face
A. USB-C output port for host computer
B. 3.5mm port for console gamepad
C. 3.5mm port for Headset
Vue Arrière
D. HDMI input port for Game console or video source
E. HDMI passthrough port for monitor or display
A
B
C
E
D
19
1
3
2
4
5
1. Connectez le port de sortie USB-C du GUV302G à un ordinateur de bureau
ou un ordinateur portable hôte à l'aide du câble USB-C vers A inclus
2. Connectez une source HDMI au port d'entrée HDMI du GUV302G
3. Connectez un écran HDMI au port d'intercommunication HDMI du GUV302G
4. Connectez une manette de jeu de console en utilisant le 3.5 mm inclus au
port de console 3.5 mm sur le GUV302G
5. Connectez un casque au port casque 3.5 mm du GUV302G
Installation du Matériel
20
Instalación de Software
Installation de l'outil audio (Windows)
1. Téléchargez GUV302G_Audiotool_win_v1.16.5.zip sur www.iogear.com.
2. Décompressez le dossier et exécutez AudioController.exe
3. Le contrôleur audio est actif lorsque les icônes sont vertes
This manual suits for next models
1
Table of contents
Languages:
