iPatio LD18785CL User manual

A1
B2
4
Table top
Table leg
Parts list Parts picture Description Q'ty Parts list Parts picture Description Q'ty
ASSEMBLY INSTRUCTIONS
11
22
D
E
A
C
B
F
Warning : DO NOT use acid or alkaline washing liquid to clean the product.
8
E
8
F
G
Lock washer
Flat washer
8
DBolt
(M8*30)
(M8)
(M8)
1
Wrench
Foot Leveler
Made in China
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
NO POWER TOOLS
*
C
These parts have been assemble by factory already!
(For LD18785CL-29.5*79.5)
AATTENTIONTTENTION::
1. Please read these instructions carefully before assembly.
2. Aluminum is a soft metal; over tightening may strip threads or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for proper
assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure
safe and proper assembly.
Assembly steps:
1. Please turn the table top (A) upside down and put it on a clean and soft place.
2 . Loosely attach the 2 legs to the table top(A) with bolts(D), flat washers(E), lock washers(F).
Do not over tighten.
3.Tighten all the bolts and nuts completely. Do not over tighten.
4.Turn the table onto its legs and use the adjuster feet to level the table.
* ASSEMBLY REQUIRED

1
4
CHAIR
A
B
C1
SEAT CUSHION
A
B
C
These parts have been assemble by factory already!
Made in China
PRODUCT INSTRUCTIONS
(For LD17863-17N)
B
Remove all protective packing material and position
base on floor.Space after period adjust all the foot levelers
level, put on the cushion and attach the cushion on the
chair frame. Now the chair is ready to use!
Warning: DO NUT use acid or alkaline washing
liquid to clean the product.
WARNING!WARNING!
If cushion gets wet, hang over chair to dry to
prevent mold/mildew.
FEET CAP

Flat washer
Leg
Seat
Parts list Parts picture Description Q'ty Parts list Parts picture Description Q'ty
Brace
Lock washer
A1
B2
2
C
4
D
E
8
16
G
16
B
C
D
1122
33
E
16
Wrench
H
Screw
F
G
F
D
F
G
A
8
Screw
I1
PVC cover
H
H
(M6*30)
(M6*20)
Made in China
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
NO POWER TOOLS
*
3. Tighten all the bolts firmly but do not over tighten.
Warning : DO NOT use acid or alkaline washing liquid to clean the product.
ASSEMBLY I NSTRUCTIONS
(For LD18785-3)
AATTENTIONTTENTION::
1. Please read these instructions carefully before assembly.
2. Aluminum is a soft metal : over tightening may strip threads or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for proper
assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure
safe and proper assembly.
Assembly step:
1. Put the seat(A) on a soft surface and then loosely attach the leg(B)to the seat with the
flat washer(F), lock washer(G),bolt(D) and PVC cover(H).Do not over tighten.
2. Now loosely attach the braces(C)to the legs with the flat washer(F), lock washer(G),bolt(E)
and PVC cover(H).
JFoot leveler
These parts have been assemble by factory already!
* ASSEMBLY REQUIRED