iPazzPort Unisen KP-810-46B User manual

Rev. 1.0
Model:KP-810-46B
Bluetooth 2in1 Music TX&RX Adapter
www.iPazzPort.com
User Manual

Function description of Bluetooth music
RX&TX Adapter
1
3
2
4
56
2
3
4
5
1

Rx Mode
Micro
charging port
State indicator&
Power button&Pause/Play
1
2
3
4
5
Micro charging port
Multifunction button
indicator&Power button
TXMode
Tx mode/ Rx mode switch Tx mode/ Rx mode switch
Vol+ Previouse song
Vol- Next song
3.5mm audio plug 3.5mm audio plug
Multifunction button indicator
&Power button&Pause/ Play
Micro charging port
TX Mode
6
Specifications:
Bluetooth version: 4.0+EDR
Bluetooth Range :Up 10M
Power supply : Bulit-in Li-ion battery
Working current: 26mAh (Max)
Size: 50X32X8mm
Weight:19.6g
2

How to use
1.Charge the device
With built-in Rechargeable Li-ion battery, it is
charged as below:
Connect your device to your Computer or Power
adaptor by connecting Micro end of USB cable to the
device and other end to your computer or power
adaptor, then a red indicator will be steady on and
go out when fully charged.
2.Switch the mode
Note : This device have two modes (TX and RX)
TX: Transmit mode ,work as Bluetooth Transmitter
RX: Receive mode ,work as Bluetooth Receiver
Please to choose correct mode when using it .
Function
Current
mode
operate
Switch to
RX mode
Rx mode
Switch to RX side before turn
device on, Hold multifunction
button 5seconds
Switch to
TX mode
Tx mode
Switch to TX side before
turn device on, Hold
multifunction button 5seconds
Note :Every start begins with an automatically search for the
previously paired device.
3

TX mode
TX mode setting
Make sure you turn the switch to the “TX”side before
you power it on ,then it will work as TX mode
automatically.
Function
Power on
&Pairing
Power off
Operate Indicator light
long press multifunction
button about 3seconds
with device off, long
press multifunction
button about 5 seconds
Blue light flash about
5-10seconds,then
blue/red light flash
Red light turns on
and then out
Note: To prolong the standby time ,the device will
power off if it fails to automatically connect any
other Bluetooth enabled equipment in 2 minutes.
Power on/off
Instruction
This device can transmit music from your media
device (Smart Phone ,iPad ,Pc and more)to your
Bluetooth-enabled equipment (bluetooth speakers/
bluetooth headphone etc.)
4

Pair to your bluetooth receiver
1.Insert the 3.5 mm audio cable into the Audio output
port of your media play device(Smart Phone,iPad,
Pc and more )
2.Long press the multifunction button about 5 seconds
till a flashing blue light appears ,and the blue&red
light flash alternatively quickly ,whitch means the
device is in pairing status.
3.Turn on your Bluetooth receiver
(bluetooth Speakers /bluetooth headphone etc)
4.Make sure the distance between your Bluetooth
receiver and the transmitter is less than 1M before
they are paired automatically.
5.If paired successfully ,prompt voice will be heard
from bluetooth receiver .
Notice: if successfully paired with the Bluetooth receiver for the
first time,they will recognize each other next time.
(please double click the power botton if you require a fast
pairing state)
5

RX mode
RX mode setting
Make sure you turn the switch to the “RX”side before you
power it on ,then it will work as RX mode automatically.
Instruction
1.Connect the device to your Speaker /headphone or Car
Stereo System with 3.5 mm audio cable.
2.Pair the receiver to your phone.
Pair to your Bluetooth Phone
1.For the first time using the device as a receiver,you shoud
pair it to your bluetooth phone.
2.
3.Open the Bluetooth function of your phone.
4.Search the Bluetooth device and click “iPazzPort TRX” to
connect it.
5.If Paired successfully, the blue light will flash slowly
(1 time per 3 seconds)or the icon “Connected ” will appear
on your phone
6 if pairing fails ,the blue light will flash twice per second.
Long press the multifunction button about 5 seconds till a
flashing blue light appears ,and the blue&red light flash
alternatively quickly ,whitch means the device is in pairing
status.
.
.
6

Notice:
1.if paired successfully for the first time ,the device
will connect your phone automatically next time
you power it on .
2.Make sure you turn the switch to the “Rx” side
before power on.
3.if pair successfully,Short press “multifunction
button to Play/Pause when you play music.
4.iPazzport TRX will recognize the latest paired
device automatically
”
.
AUX
Play music
you can transmit wirelessly and play& pause the
music(by clicking the power button) once you
get the ipazzport TRX and Bluetooth transmitter
paired ,at the same time the 3.5 mm audio plug
connected with the audio devices.
7

FAQ
1.Fail to power on.
Please make sure the devices is fully charged.
(please charge the iPazzport TRX in time)
2.Fail to pair it with other devices?
a.Please make sure the correct audio mode.
(it can only connect other Bluetooth receiver unit
in TX mode, and other Bluetooth transmitter unit
in RX mode)
b.please make sure the distance is less than 1m in
pairing process.
3.the sound is unavailable on the Bluetooth receiver
when playing music in TX mode
a.please make sure it is in good connection between
the player and the audio plug of the iPazzport TRX.
b.please the music is playing on the player.
c.please make sure a moderate volume on the audio
player.
4.a poor voice effect in RX mode
a.please make sure a good connection between the
audio plug of iPazzport TRX and the AUX port.
b.please make sure there is no hindrance between
them and both are in a effective rang.
8