IPEMA TETHERBALL User manual

INSTALLATION GUIDELINES
Page 1 of 2
TETHERBALL
DATE: 12/18/2014
TETHERBALL
3-1/2” Vertical Post
PRE-INSTALLATION CHECK:
Compare all items received to the packing list. Notify your local sales representative immediately if any
parts are missing or damaged.
We are not responsible for items discovered missing or damaged
after 72 hours from time of delivery!
Before beginning installation, make sure that you have read and understand the Installation Introduction
manual that was supplied to you. If you did not receive a copy, or if you have a question regarding anything
covered in this manual, contact your local sales representative.
USER GROUP: 2 - 12
RECOMMENDED CREW: 2 people
TOOLS REQUIRED:
Level
Auger / Post hole digger / Shovel
INSTALLATION TIME: 1 hour
CONCRETE REQUIRED: 3.53 cubic feet
NOTE: Concrete must have a minimum rating of 2,500 psi and
must be mixed per manufacturer’s recommendations.

INSTALLATION GUIDELINES
Page 2 of 2
TETHERBALL
DATE: 12/18/2014
STEP 1
Refer to PLAN VIEW and FOOTING LAYOUT to locate tetherball.
STEP 2
Excavate footing as shown in FOOTING LAYOUT and FOOTING ELEVATION.
STEP 3
Set post in place in footing. Block and brace into position, making sure tetherbal post is plumb and at
correct elevation. Pour concrete in footing to correct level. Fill remainder of footing with dirt. Allow concrete
to harden for at least 48 hours before use. NOTE: Concrete must have a minimum rating of 2,500 psi
and must be mixed per manufacturer’s recommendations.
ELEVATION VIEW