IQCCTV IQC649V User manual

IQC649V
USER MANUAL
TECHNICAL SUPPORT:
For Technical Support please contact your local distributor.
LIMITED WARRANTY:
This product is supplied with a 1 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and damage
caused by normal wear and tear. In the unlikely event that you encounter a
problem with this product, it should be returned to the place of purchase.
High Resolution Vandal Resistant Varifocal
IR Dome Camera, 650 TVL, 30m IR

1. DO NOT ATTEMPT TO DISASSEMBLE THE CAMERA
2. HANDLE THE CAMERA WITH CARE
3. DO NOT EXPOSE AN INDOOR CAMERA TO RAIN OR MOISTURE, OR TRY TO OPERATE IT
IN WET AREAS -Take immediate action if the camera becomes wet. Turn the power off
to the camera and contact a CCTV professional. Moisture can damage the camera and
also create a danger of electric shock.
4. DO NOT USE STRONG OR ABRASIVE DETERGENTS WHEN CLEANING THE CAMERA BODY.
5. NEVER POINT THE CAMERA TOWARD THE SUN - Whether the camera is used outdoors or
not, never point it towards the sun. Use caution when operating the camera in the vicinity
of spot lights and light reflecting objects.
6. DO NOT OPERATE THE CAMERA BEYOND ITS TEMPERATURE, HUMIDITY OR POWER
SOURCE RATINGS. -Do not use the camera in an extreme environment where high
temperature of high humidity exists. Use the camera under conditions where
temperatures are between 14℉to 122℉(-10℃to 50℃), and humidity is below 85%.
For the correct power supply, refer to the specification sheet.
Caution
2
Before you begin:
Please unpack the box carefully and identify that all the parts are present.
Make sure you use only the recommended power supply. Damage caused to
the camera by incorrect voltage or wiring is not covered by the warranty.
Do not cut the connectors of the camera cables, this will void your warranty.
Before operating this product, please read this instruction manual properly.

3
Installation
1. Select a suitable position on the wall or ceiling to install
the camera. Take the mounting bracket off the dome
camera by unscrewing the fixing screw using the Allen key
supplied.
2. Rotate the upper ring of the camera, it will unscrew from
the dome base. Be careful when handling the camera as
the parts are not fixed to the upper ring or the camera
‘ball’.
3. Using the Dome base as a guide, drill a hole in the middle
of the base circle on the wall or ceiling where the camera
is to be mounted, to allow the power and video cable to
be fed through.
4. Screw the Dome base to the wall or ceiling using the Wall
Plugs and screws supplied.
5. Feed the Camera’s cable through the hole and adjust the
Camera ‘ball’ so the camera is positioned in the correct
direction and at the correct angle.
6. When the camera is in the correct position, put the upper
and lower ring of the camera back into position. Secure
the upper ring back onto the base to secure the camera in
place.
7. Connect the power terminal of the camera to a 12V DC
regulated power supply. Connect the camera video output
and the video input on the control or viewing equipment
with RG59 (BNC) video signal cable.
8. Once installed the camera’s Zoom & Focus can be altered
by adjusting corresponding screws either side of the lens,
using the screwdriver provided.
1
2
12v DC Input
Power Cable
BNC
Video Cable
7

IQC649V
4
Specifications
Style: Vandal Resistant IR Dome Camera
Weather Resistant: Yes
IP Rating IP65
Operating Temperature: -10 to 50°C
Vandal Resistant: Yes
Mounting Type: Wall or Ceiling
Dimension : 120 x 90mm (DxH)
Weight: 0.81 Kg
Warranty: 1 Year
Sensor Type: Xvision X650 - 1/3" Digital Imaging Sensor
DSP Type: Xvision XE
DSP Functions: Automatic Electronic Iris
Automatic White Balance
Automatic Gain Control
Resolution: 650 TVL
Minimum Illumination: 0 Lux (IR on)
Night Vision: 0.1 Lux (IR off)
30m IR Night Vision
True Day/Night (Mechanical IR Filter)
Lens Type: Varifocal
Lens Size: 4.0 to 9.0mm
Viewing Angle: 30 to 64°
Operating Voltage: 12v DC
Power Consumption: 390mA
Video Output: BNC Socket
Audio Output: N/A
Power Input: DC Socket