iROCKER ULTRA Series User manual

Owner’s Manual
Re-engineered for Compact Convenience
TM

THE WORLD’S MOST
TRAVEL-FRIENDLY PADDLE
BOARD COLLECTION.
THE ULTRA
COLLECTION

INFLATING & DEFLATING ..........................................................
INSTALLING FINS .....................................................................
THE ACTION MOUNT .................................................................
ADJUSTABLE SUP PADDLE ..........................................................
TRANSPORTING YOUR BOARD .................................................
FOLDING & STORAGE ...............................................................
CARE & MAINTENANCE ............................................................
SAFETY GUIDELINES ..................................................................
REPAIRING YOUR BOARD ..........................................................
WARRANTY INFORMATION .......................................................
RELEASE OF LIABILITY ................................................................
CONTENTS
2
3
4
5
5
6
7
8
9
10
11
12

INFLATING & DEFLATING
AIR VALVE CAP
ALL ULTRATM MODELS
COMPATIBLE WITH
IROCKER HAND PUMP
CLOSED/UP POSITION OPEN/DOWN POSITION
TM
12V ELECTRIC PUMP / INFLATION
Here’s a simple guide for inflating your IROCKER ULTRATM paddle board.
TO INFLATE:
Connect your pump to your vehicle’s cigarette lighter or a 12V
battery. Note: we really like having a 12V battery at the ready.
Set your preferred PSI somewhere between 15 and 23 (if you don’t
already know your perfect PSI). To do this, use the LCD display
screen on the pump.
Use the convenient inflation hose to connect your pump to your
paddle board. It’s incredibly simple!
Press the power button and then relax (or stretch, or snap a pic
or whatever).
Once you hit the ideal PSI, unclasp the hose and get moving.
114” (9’5”) CIGARETTE LIGHTER POWER CORD: This small but mighty piece of
equipment is how you make your car your the pump’s power source. Insert the available end
into the cigarette lighter to allow power to flow through the pump. If you don’t have a cigarette
lighter or a car, then read on.
12V BATTERY ALLIGATOR CLIPS: The pump also comes equipped with “alligator clips”
that can connect to the positive and negative terminals of a basic 12V battery. We LOVE this
feature! You may not own a car or even want your car when you’re out for a paddle. If that’s you,
then a small investment into a mobile 12V battery is a great idea.
42” (3.5”) INFLATION HOSE: The inflation hose is designed specifically to fit all iROCKER
and BLACKFIN boards. You’ll simply connect one end of the hose to your board and the other
end to your electric pump.

ULTRA SERIES OWNER’S MANUAL | 4
INSTALLING YOUR FINS
TO INSTALL :
TO TETHER :
OPEN/UP POSITION PROPERLY INSERTEDALIGNED WITH NOTCH CLOSED/DOWN POSITION
TWIN FIN CONFIGURATION
Your iROCKER ULTRATM Series board comes
equipped with two removable tethered flip-lock
nylon fins for added maneuverability and control.
Make sure the fin box lock is in the OPEN/UP position.
Insert the front of the fin into the notched section of the fin box.
Rock the fin back and down until it’s in place, then set the lock
lever to the CLOSED/DOWN position.
Confirm each fin is securely attached before paddling.
Insert the tether-lock into the fin.
Turn toward the locked icon until it snaps into position.
To release the tether, turn toward the unlocked icon and remove
the tether.

TM
ATTACHING ACCESSORIES
Your board has 3 built-in ACTION MOUNTS with M8 size thread, allowing
you to customize your board with a variety of accessories. Be sure to
ATTACH YOUR ACCESSORY AFTER INFLATING and remember to
REMOVE IT BEFORE DEFLATING.
THE ACTION MOUNT
ACCESSORY MOUNT
TO OPEN : Grab the notched sides of the C-clamp, firmly
pulling it towards you.
TO CLOSE : Once the paddle is at the desired length, apply
gentle thumb pressure, pressing the C-clamp shut. Be careful
not to pinch your fingers when adjusting paddle length!
IMPORTANT: DO NOT REMOVE SHAFT STYROFOAM
Your board comes with a 5-piece paddle for compact convenience.
DO NOT REMOVE any Styrofoam from the paddle shaft, as it provides
buoyancy and allows the paddle to float.
Always disassemble and rinse your paddle with fresh water after each
use and allow it to dry before reassembling.
ADJUSTABLE SUP PADDLE

ULTRA SERIES OWNER’S MANUAL | 6
FOLDING YOUR BOARD
IMPORTANT: Dry the board completely before tightly folding for storage.
Excess moisture may cause mildew or mold damage.
When folding the board, always start at the nose, making sure the air valve
is in the OPEN/DOWN position. Once the board is completely folded, set
the air valve to the CLOSED/UP position, then wrap the strap around the
rolled board and place it in the bag.
TO FOLD:
Once the board is completely dry and fully deflated, lay it
deck-side up on a flat surface.
Begin folding the board tightly in sections, starting from the
nose.
Continue folding until the board is completely rolled up, then
set the air valve to the CLOSED/UP position.
IMPORTANT: Avoid standing the rolled board on its side on rough
surfaces such as concrete or rocks. This can cause damage to the first layer
of the rail.
FOLDING & STORING YOUR BOARD

TM
CARE & MAINTENANCE
Never leave your paddle board exposed to direct sunlight when out
of the water. Always store your paddle board in the shade when not in
use. If you must expose your board to direct sunlight during transport or
temporary storage, it is safest to keep the bottom facing up. Prolonged
exposure to the sun, even while paddle boarding, may impact the integrity
of the board materials. Damage resulting from heat is not covered by the
manufacturer’s warranty.
IMPORTANT : PROLONGED HEAT EXPOSURE
RECOMMENDED BOARD PRESSURE:15PSI
Your board can hold up to 25 PSI. However, the recommendation is 15
PSI as the board will remain rigid at 15 PSI and no benefit is gained by
inflating further.
If the board is inflated cold to 25 PSI and then placed in direct sunlight,
the heat will increase the pressure, causing potential over inflation and
damage to the board’s seams. This damage is not covered by warranty.
BOARD MAINTENANCE
Sun, sand, and saltwater will degrade any man-made material over time.
Rinse off sand and saltwater deposits from your paddle board with fresh
water, then wash with soap and water and store in a cool, dry environment
after each use. Allow carry handles to dry completely prior to storing for
a prolonged period.

ULTRA SERIES OWNER’S MANUAL | 8
IMPORTANT: Do not transport your board while inflated. Your board
is designed to be compact for convenient storage and travel. Never
transport an inflated paddle board on top of a vehicle. Due to lack of
weight when inflated, the board will travel poorly if strapped to the roof of
a moving vehicle. Damages or warping incurred by improper transport are
not covered by warranty.
When transporting the board, be sure to avoid sharp objects. Punctures
are not covered by warranty.
Keep the board clear of any heat-producing items such as camp stoves,
gas lamps, etc. Damages resulting from heat are not covered by
warranty.
TRANSPORTING YOUR BOARD

TM
FOLLOW LOCAL BOATING LAWS
IMPORTANT: Remember to check local laws and regulations regarding
the safe and proper use of this product. Always paddle with a U.S. Coast
Guard approved personal flotation device (PFD).
Never go paddle boarding in severe weather or water conditions that might
inhibit your ability to steer the board or return to shore safely. Don’t paddle
before dawn, after sunset, or in any other poor lighting conditions that
might impair visibility.
Minors should always use this product with adult supervision.
Never use this product beyond your own skills or ability.
SAFETY FIRST!