GROUND MOUNT INSTALLATION MANUAL - 7© 2015 IRONRIDGE, INC. VERSION 2.20
WARRANTY
Effective for IronRidge, Inc. (“IronRidge”) mounting structure components (“Products”) manufactured after April 1st,
2012, IronRidge provides the following warranties, for Products installed properly and used for the purpose for which the
Products are designed:
• nishes shall be free of visible defects, peeling, or cracking, under normal atmospheric conditions, for a period of
three (3) years from the earlier of (i) the date of complete installation of the Product or (ii) thirty days after the original
purchaser’s date of purchase of the Product (“Finish Warranty”);
• components shall be free of structurally-related defects in materials for a period of ten (10) years from the earlier of (i)
the date of complete installation of the Product or (ii) thirty days after the original purchaser’s date of purchase of the
Product;
• components shall be free of functionally-related manufacturing defects for a period of twenty (20) years from date of
manufacture.
The Finish Warranty does not apply to: (a) surface oxidation of the galvanized steel components or any foreign residue
deposited on Product nish; and (b) Products installed in corrosive atmospheric conditions, as dened solely by
IronRidge; corrosive atmospheric conditions include, but are not limited to, conditions where Product is exposed to
corrosive chemicals, fumes, cement dust, salt water marine environments or to continual spraying of either salt or fresh
water. The Finish Warranty is VOID if (c) the practices specied by AAMA 609 & 610-02 – “Cleaning and Maintenance for
Architecturally Finished Aluminum” (www.aamanet.org) are not followed by Purchaser for IronRidge’s aluminum based
components; and (d) if the practices specied by ASTM A780 / A780M - 09 “Standard Practice for Repair of Damaged
and Uncoated Areas of HotDip Galvanized Coatings” are not followed by Purchaser for IronRidge’s galvanized steel-
based components.
The warranties above do not cover any parts or materials not manufactured by IronRidge, and exclude nonfunctionally-
related defects, as dened solely by IronRidge. The warranties do not cover any defect that has not been reported to
IronRidge in writing within twenty (20) days after discovery of such defect.
In the event of breach of or non-compliance with the warranties set forth above, IronRidge’s sole obligation and
liability, and the sole and exclusive remedy for such breach or non-compliance, shall be correction of defects by repair,
replacement, or credit, at IronRidge’s sole discretion. Such repair, replacement or credit shall completely satisfy and
discharge all of IronRidge’s liability with respect to these warranties.
Refurbished Product may be used to repair or replace the defective components. Transportation, installation, labor, or any
other costs associated with Product replacement are not covered by these warranties and are not reimbursable. These
warranties additionally do not cover (a) normal wear, or damage resulting from misuse, overloading, abuse, improper
installation (including failure to follow professional instruction and certication), negligence, or accident, or from force
majeure acts including any natural disasters, war or criminal acts; and (b) Products that have been altered, modied or
repaired without written authorization from IronRidge or its authorized representative; and (c) Products used in a manner
or for a purpose other than that specied by IronRidge. A formal document proving the purchase and
the purchase date of the Product is required with any warranty claim.
Except as set forth above, IronRidge sells the Products on an “AS IS” basis, which may not be free of errors or defects,
and ALL EXPRESS OR IMPLIED REPRESENTATIONS AND WARRANTIES, INCLUDING ANY WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, WORKMANLIKE EFFORT,
CORRESPONDENCE TO DESCRIPTION, DESIGN, TITLE OR NON-INFRINGEMENT, OR ARISING FROM COURSE
OF DEALING, COURSE OF PERFORMANCE OR TRADE PRACTICE, ARE HEREBY DISCLAIMED.
