ISAFE MOBILE MTHA11 User manual

IS -TH1xx.2
OPERATING MANUAL
SAFETY INSTRUCTIONS
MODEL MTHA10 / MTHA11

Document No. 1054MM01REV02
Version: 2022-10-27
(c) 2022 i.safe MOBILE GmbH
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
Tel. [phone]
[email protected]
www.isafe-mobile.com Template: TEMPMM01REV10

CONTENTS
English.............................................................................. 4
Deutsch............................................................................. 9
Česky .............................................................................. 15
Español ............................................................................ 21
Suomi.............................................................................. 27
Français............................................................................ 33
Magyar ............................................................................ 39
Italiano ............................................................................ 45
Nederlands ........................................................................ 51
Norsk .............................................................................. 57
Polski .............................................................................. 62
Português (BR) ..................................................................... 69
Русский............................................................................ 75
Svenska ............................................................................ 81
Korean ............................................................................. 87
Japanese........................................................................... 92
Chinese............................................................................98
Arabic ............................................................................104
This Operating Manual complies with these standards:
IEC 60079, IEC 82079, ANSI Z535.6
Diese Bedienungsanleitung erfüllt die Anforderungen der folgenden Normen:
IEC 60079, IEC 82079, ANSI Z535.6

4
ENGLISH
READ AND UNDERSTAND THE INSTRUCTIONS
PROTECT YOUR LIFE AND READ THE OPERATING MANUAL
This Operating Manual is part of the device IS-TH1xx.2 (model MTHA10 / MTHA11). This
Operating Manual provides important information for safe use of the device.
Before using the device, read this Operating Manual carefully and pay particular attention to
the “Safety” section and the warnings highlighted with the warning symbol.
Make sure you have access to this Operating Manual when you need it. You can nd the
current Operating Manual at www.isafe-mobile.com/en/support/downloads
Follow all instructions given on the device and on the packaging.
Follow local safety regulations.
INTENDED USE
The device IS-TH1xx.2 is used for scanning barcodes. The device IS-TH1xx.2 is suitable for
use in potentially explosive atmospheres classied zone
2/22 in accordance with directives
2014/34/EU , SI 2016 No. 1107 and 1999/92/EC, as well as the IECEx scheme.
Only use the device as described in this Operating Manual. Any other use is considered
improper and can lead to death, severe injuries and damage to the device.
The manufacturer i.safe MOBILE GmbH does not assume any liability for damage caused
by improper use. The warranty expires in the event of improper use.
WARRANTY
You can nd the warranty conditions at www.isafe-mobile.com/en/support/service
EX MARKINGS
ATEX:
II 3G Ex ic op is IIC T4 Gc
II 3D Ex ic op is IIIC T135°C Dc
EU Type Examination Certicate:
EPS 21 ATEX 1 082 X
CE-designation:
IECEx:
Ex ic op is IIC T4 Gc
Ex ic op is IIIC T135°C Dc
IECEx Certicate: IECEx EPS 21.0028X
UKEX:
II 3G Ex ic op is IIC T4 Gc
II 3D Ex ic op is IIIC T135°C Dc
UK Type Examination Certicate:
CML 21UKEX21327X
UKCA-designation:
North America:
Class I Div 2 Groups A, B, C, D, T4
Class II Div 2 Groups F, G, T135˚C
Class III Div 2
CSA21CA80083773X
Temperature range:
-20°C … +60°C (EN/IEC 60079-0)
-10°C … +50°C (EN/IEC 62368-1)
Manufactured by:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany

EN 5
EU/UK DECLARATION OF CONFORMITY
You will nd the EU/UK declaration of conformity at the end of this Operating Manual or at
www.isafe-mobile.com/en/support/downloads
PRODUCT COMPLIANCE FOR NORTH AMERICA
Conforms to:
STD UL 62368-1, STD UL 913
Certied to:
CSA STD CSA C22.2#60079-0, CSA STD CSA C22.2#60079-11, CSA STD CSA C22.2#62368-1
DEVICE OVERVIEW
1
4
3
2
1 HOLDER: Holder for IS530.2
2 PLUG: Connecting IS530.2
3 SCAN BUTTON: Scanning barcodes
4EYELET: Eyelet for Lanyard IS-TH
NAME CONCEPT
The two “xx” in IS-TH1xx.2 are placeholders. The IS-TH1xx.2 comes in two variants with
dierent scan ranges and scan engines:
name (model) scan range scan engine
IS-TH1MR.2 (MTHA10) mid range Zebra SE4750 (MR)
IS-TH1ER.2 (MTHA11) extended range Zebra SE4850 (ER)

6
SAFETY
Read the “Safety” section of this Operating Manual carefully before using the device. If you
do not follow these instructions or do not understand them, this could lead to death, severe
injuries and damage to the device.
USER
Only trained users who are qualied in the use of Ex devices in explosion hazardous areas and
who have read and understood this Operating Manual may use this device.
EXRELEVANT SAFETY REGULATIONS
Use of this device assumes that the operator observes the conventional safety regulations and
has read and understood Operating Manual, Safety Instructions and certicate. When used in
explosion hazardous areas, the following Safety Instructions must also be complied with:
The device may be connected only outside ex-hazardous areas to the IS530.2 via the ISM
interface.
To ensure the IP-protection, it has to be ensured that all gaskets are present
and functional. There must be no large gap between the two halves of the housing.
The device must be securely fastened to the ISM interface when used in ex-hazardous areas.
The device may not be exposed to any aggressive acids or alkalis.
The device may only be used in zones 2 or 22.
Only accessories approved by i.safe MOBILE GmbH may be used.
EXRELEVANT SAFETY REGULATIONS FOR NORTH AMERICA
Conditions of Acceptability:
The Barcode Scanner IS-TH1xx.2 must be protected from impacts with high impact energy,
against excessive UV light emission and high electrostatic charge processes.
The 13-Pin connector of the IS-TH1xx.2 may only be assembled or disassembled from the ISM
interface outside hazardous areas.
The 2 pin charging contacts of the IS-TH1xx.2 should only be used in non-hazardous
locations.
Unauthorized repair is not allowed.
Apparatus is for use in pollution degree 2 or better.
Only designated charger may be connected to the charging contacts.
Not suitable for hazardous locations when enclosure is damaged.
USE IN EXPLOSION HAZARDOUS AREAS
DANGER
Improper use can result in death or severe injuries!
Only use the device in explosion hazardous areas of zones2/22 or outside of
explosion hazardous areas.
Only connect the device outside explosion hazardous areas to the ISM interface of the
IS530.2.

EN 7
Before entering an explosion hazardous area with the device,
• make sure that the device is securely fastened to the ISM interface of the IS530.2,
• make sure that no gap can be seen between the two halves of the device,
• make sure the device is not damaged,
• make sure that all the labels on the device are readable.
If you use the device in an explosion hazardous area,
read and follow the instructions in the “Possible User Errors” section.
Switch o the device immediately and leave the explosion hazardous area without delay if
• malfunctions occur on the device,
• you have damaged the housing of the device,
• you have exposed the device to excessive loads,
• the labels on the device are no longer readable.
POSSIBLE USER ERRORS
DANGER
Improper use can result in death or severe injuries! Follow the instructions below:
Laser Light. Do not stare into beam class 2 laser product 630 - 680 nm, 1 mW.
Do not modify the device structurally.
Do not expose the device to high temperatures.
Do not expose the device to strong UV radiation.
Do not expose the device to processes with high electrical charges.
Do not expose the device to aggressive acids or bases.
When working in explosion hazardous areas, please note:
Do not loosen the screws on the device.
Do not open any interface cover.
Do not charge the IS530.2.
Do not open the device.
Do not damage the device.
SCOPE OF DELIVERY
Your device packaging contains the following:
1 x IS-TH1xx.2
1 x Operating Manual Safety Instructions
1 x Screwdriver
1 x Lanyard IS-TH
INSTALLATION
DANGER
Improper use can result in death or severe injuries! Only connect the device outside explosion
hazardous areas to the ISM interface of the IS530.2.

8
4
1
2
3
5
6
7
Unscrew the cover of the ISM interface (1) located on the IS530.2.
Push the IS530.2 completely into the holder (2) of the device.
Unscrew the screw (3).
Loosen the plug (4).
Attach the plug on top of the ISM interface (5).
Fix the plug by pressing the rounded end of the plug (6).
Tighten the screw (7).
Check whether the plug is correctly and rmly attached to the ISM interface.
The device can now be used together with the IS530.2 in explosion hazardous areas.
POSSIBLE DEVICE PROBLEMS
You can nd information on possible device problems and how to rectify them at
www.isafe-mobile.com/en/support/service under the menu item “FAQ”.
If you have any further questions, please contact the i.safe MOBILE repair service at
www.isafe-mobile.com/en/support/service
MAINTENANCE/REPAIR
The device itself has no serviceable parts.
WARNING
Incorrect repairs present a risk of explosion or re, which can result in death or severe injuries!
Do not open the device or carry out any repairs yourself.
Contact the i.safe MOBILE repair service at www.isafe-mobile.com/en/support/service if
the device is not working normally, if the device needs to be repaired or if a replacement part
is required.
RETURN SHIPMENT
Contact the i.safe MOBILE repair service at www.isafe-mobile.com/en/support/service
DISTRIBUTION PARTNER
You can nd the specialist distribution partner responsible for your country at
www.isafe-mobile.com/en/contact

DE 9
CLEANING
NOTICE
Incorrect cleaning can cause damage to the device. Please note the following when cleaning:
Do not use chemical agents for cleaning.
Clean the device with a soft, moistened antistatic cloth.
STORAGE
NOTICE
Incorrect storage can cause damage to the device. Store the device at ambient temperatures
between +5°C to +35°C (41°F to +95°F) and a humidity between 10 % to 60 %.
RECYCLING
NOTICE
Incorrect disposal of electronic products, batteries and packaging material puts the
environment at risk. Please note the following when disposing of items:
DO NOT throw away batteries with household waste.
Always dispose electronic products, batteries and packaging material at the appropriate col-
lection points. This way, you prevent uncontrolled waste disposal and promote the recycling
of material resources.
You can obtain further information from regional waste disposal companies, state
authorities or the i.safe MOBILE service centre responsible for your country or region at
www.isafe-mobile.com/en/support/service
TRADEMARKS
i.safe MOBILE and the i.safe MOBILE logo are registered trademarks of the
i.safe MOBILE GmbH. All other trademarks and copyrights are the properties of their
respective owners.
DEUTSCH
ANWEISUNGEN LESEN UND VERSTEHEN
SCHÜTZEN SIE IHR LEBEN UND LESEN SIE DIE BEDIENUNGSANLEITUNG
Diese Bedienungsanleitung ist Teil des Geräts IS-TH1xx.2 (Modell MTHA10 / MTHA11). Die
Bedienungsanleitung liefert wichtige Informationen für eine sichere Verwendung des Geräts.
Lesen Sie vor der Verwendung des Geräts diese Bedienungsanleitung sorgfältig durch und
beachten Sie insbesondere den Abschnitt „Sicherheit“ und die mit dem Warnsymbol hervor-
gehobenen Warnhinweise.

10
Sorgen Sie dafür, dass Sie bei Bedarf Zugri auf diese Bedienungsanleitung haben. Die aktuel-
le Bedienungsanleitung nden Sie unter www.isafe-mobile.com/de/support/downloads
Beachten Sie alle Anweisungen auf dem Gerät und auf der Verpackung.
Befolgen Sie die örtlichen Sicherheitsvorschriften.
BESTIMMUNGSGEMÄSSE VERWENDUNG
Das Gerät IS-TH1xx.2 dient zum Scannen von Barcodes. Das Gerät IS-TH1xx.2 ist geeignet für
den industriellen Einsatz in explosionsgefährdeten Bereichen der Zone 2/22 nach Richtlinien
2014/34/EU, SI 2016 No. 1107, 1999/92/EG und dem IECEx- System.
Verwenden Sie das Gerät nur, wie in dieser Bedienungsanleitung beschrieben. Jede andere
Verwendung gilt als nicht bestimmungsgemäß und kann zu Tod, schweren Verletzungen
und Schäden am Gerät führen.
Der Hersteller i.safe MOBILE GmbH übernimmt keine Haftung für Schäden, die durch
nicht bestimmungsgemäße Verwendung entstanden sind. Die Garantie erlischt bei nicht
bestimmungsgemäßer Verwendung.
GARANTIE
Die Garantiebestimmungen nden Sie unter
www.isafe-mobile.com/ de/ support/service
EU/UKKONFORMITÄTSERKLÄRUNG
Die EU/UK-Konformitätserklärung nden Sie am Ende dieser Anleitung oder unter
www.isafe-mobile.com/ de/support/downloads
EXKENNZEICHNUNGEN
ATEX:
II 3G Ex ic op is IIC T4 Gc
II 3D Ex ic op is IIIC T135°C Dc
EU-Baumusterprüfbescheinigung:
EPS 21 ATEX 1 082 X
CE-Kennzeichnung:
IECEx:
Ex ic op is IIC T4 Gc
Ex ic op is IIIC T135°C Dc
IECEx-Zertikat: IECEx EPS 21.0028X
UKEX:
II 3G Ex ic op is IIC T4 Gc
II 3D Ex ic op is IIIC T135°C Dc
UK-Baumusterprüfbescheinigung:
CML 21UKEX21327X
UKCA-Kennzeichnung:
Nordamerika:
Class I Div 2 Groups A, B, C, D, T4
Class II Div 2 Groups F, G, T135˚C
Class III Div 2
CSA21CA80083773X
Temperaturbereich:
-20°C … +60°C (EN/IEC 60079-0)
-10°C … +50°C (EN/IEC 62368-1)
Hersteller:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
PRODUKTKONFORMITÄT FÜR NORDAMERIKA
Konformität mit:
STD UL 62368-1, STD UL 913
Zertiziert nach:
CSA STD CSA C22.2#60079-0, CSA STD CSA C22.2#60079-11, CSA STD CSA C22.2#62368-1