Ismartgate Cam iSG-CAM-02W User manual

142.5mm
.00
.00 95.00mm 190.00mm 285.00mm 380.00mm
V1.0
What's in the box
Quick Installation Guide
Resource CDEthernet Cable
Power Adapter
IP Camera
Meet the iSmartgate Cam (outdoor model)
Wi-Fi Antenna 1. Turn on your iSmartgate IP Camera using the
provided power supply. (do NOT use the Ethernet -
RJ45 cable).
2. Connect your Smartphone to the same Wi-Fi
network where you will connect the iSmartgate IP
Camera. (internet required).
3. Download the iSmartgate Cam app for your iPhone
or Android phone.
WPS
LAN
Yellow cable: Audio in
Power
Reset Button
Antenna
Induction IC
LENS
Infrared LED
3
Quick Installation Guide
OutdoorHD Wireless IP Camera
Quick Installation Guide
Model: iSG-CAM-02W
OUTDOOR HD WIRELESS IP CAMERA
1. Turning on your Camera
Please Note:
· Please make sure that the rain or water will not reach
the connector ports at the end of the pig tail wiring.
· These connectors are not weather-resistant.
0~90°
0~90°
0~360°
0~360°
0~360°
0~360°
Place the camera on your preferred location and use
the supplied mounting screws to fix the camera
securely.
Red cable: Audio out

142.5mm
.00
.00 95.00mm 190.00mm 285.00mm 380.00mm
3. Setting up your IP Camera
1. Press the "+" sign to add your IP Camera.
2. Tap the "Scan QR Code" button to add your camera
(P2P connection). (Optional: You can also manually
add the UID* code).
3. Scan the QR code at the back of your IP Camera
with your Smartphone.
4. Select Wi-Fi mode (wireless set up). In the "Set up"
menu, check scanned UID* and Wi-Fi network name
are correct.
5. If so, introduce your Wi-Fi network password
(WLAN Password). Field is case sensitive.
6. Press CONNECT button. Wait 30-120 seconds
until camera is succesfully connected.
2. Setting up your user account
1. Open the iSmartgate Cam.
2. Press the "Register Now" button if you are setting up
an iSmartgate IP camera for the first time.
3. Fill in all the fields: email, password and new
password. Select your country and accept terms and
conditions. Press "Register" button afterwards.
4. Wait for confirmation email and press Login.
5. Login with your iSmartgate Cam account.
4. Syncing iSmartgate devices
www.ismartgate.com
5. FAQ
Forget Username / Password
Please Note:
After restoring IP camera to factory default settings;
please follow Setup process to connect IP camera
to your Wi-Fi network again.
In case you fail adding your IP camera to your
Wi-Fi network, please use the WPS connection.
Instructions can be found in supplied CD,
in the IP camera User Manual.
Restore camera back to factory settings:
1. Press "Reset" button for about 10 seconds
with camera powered on.
2. Release the button and wait about 30 seconds,
the camera will automatically restart, and restore
factory settings with:
Username = admin
Password =(blank)
Your iSmartgate Cam can be paired with the Gogogate2
and iSmartgate products. By combining the iSmartgate
Cam with such devices, you will be able to remotely
control, monitor and watch your garage door or gate
from a single app.
Instructions on how to pair your iSmartgate Cam with
these products can be found here:
www.ismartgate.com/isg_cam/connect.html
*UID: This code identifies your IP camera. This code is
unique and can be found next to the scannable QR
code of your iSmartgate IP Cam.