The DECI-MATE G pedal is the latest generation in noise
reduction technology. The DECI-MATE G includes a 3.5MM
TRS loop (interface cable included) allowing the user to insert
noisy pedals in the loop, or allows interface with a guitar
amplifier series effects loop as shown in the diagrams. The
DECI-MATE G features new processing technology called
Decimator X Technology. Decimator X Technology provides
adaptive tracking to control the downward expander providing
the smoothest release response available with long sustained
notes. The 3.5MM loop has an internal normalizing connection when no connector is inserted, which means the signal
will pass internally. There is no need to adjust the release time of the DECI-MATE since the release response is fully
adaptive. The adaptive release response tracks the envelope of the audio signal and adapts the release to match the
release of the envelope of the actual input signal to deliver transparent operation. The main advantage of the DECI-
MATE G is the noise reduction control circuit tracks the direct guitar output signal and generates an adaptive control
signal relative to the direct guitar signal. This adaptive control signal is then used to control the noise reduction block
which can be inserted in your signal path after any noise generating gain circuitry. This allows you to switch from clean
to extreme high gain and never need to adjust the threshold of the Decimator. The DECI-MATE G requires an external
9 volt DC power supply with the polarity, center pin negative and sleeve positive. DO NOT CONNECT A POWER
SUPPLY WITH THE OPPOSITE POLARITY: DAMAGE WILL OCCUR. The DECI-MATE G pedal covered under US
Patent number 8,842,852 other patents pending. DECI-MATE G™ is a trademark of ISP Technologies.
WARRANTY & SERVICE: This unit parts and workmanship are fully guaranteed to be free of defects under
normal use and service for a period of three years from date of purchase. Any damage resulting from misuse or the
failure to follow the precautions and instructions will void the warranty. In the event that the unit needs to be repaired,
please return the unit to ISP Technologies directly. Simply re-pack the unit, send a copy of your original receipt, a note
stating the problem and send it to: ISP Technologies 5479 Perry Drive Suite B Waterford, MI 48329
All shipping charges must be fully prepaid. ISP will not
be responsible for any damages incurred in shipping of
any unit. Any claim will need to be settled with the
shipping company. The warranty will be voided if the
serial number has been tampered with in any way. The
warranty data must be filled out on line at
www.isptechnologies.com in order to activate the
warranty. Should you have any questions for the repair
department prior to returning the product please call
(248)-673-7790