Istar 90056PI User manual
LED DESK LAMP
with wireless charging base
90056PI
user guide
www.philex.com
2 LED DESK LAMP - User Guide www.philex.com
Contents ..............................................................................................................Page
Warnings .................................................................................................................... 2
Box contents ............................................................................................................. 3
Features and controls ............................................................................................. 3
Introduction .............................................................................................................. 4
Connection and light controls ............................................................................... 3
Arm and shade angle adjustment.......................................................................... 4
Wireless charging...................................................................................................... 5
USB charging.............................................................................................................. 5
Troubleshooting wireless charging ....................................................................... 5
Protection functions................................................................................................. 7
Specications ............................................................................................................ 8
Technical .................................................................................................................... 6
Warnings and advice
Do not expose the lamp to dripping or splashed uids. Objects lled with
liquids, such as vases, should not be placed close to the lamp.
The unit should not be exposed to direct sunlight, very high or low
temperature, moisture, vibrations, strong magnetic elds, high frequencies
and dusty environments.
Do not disassemble, there are no user serviceable parts. Do not try to remove
the LED bulb it is integral and not user replaceable. If your lamp isn’t working
properly consult a qualied electrician or engineer.
Only use the power adaptor supplied. If you need to replace it ensure the
substitute has the same rating and polarity.
The adapter should be unplugged from the mains socket if the lamp is not
being used for a long period time.
Always operate the lamp on a at stable surface.
Make sure the LED light source does not shine directly into anyone’s eyes.
Please unplug the power supply and stop using the lamp if:
*The power cord or PSU is damaged
*The lamp base gets wet
*The LED bulb ashes intermittently or stops working completely
Do not use abrasives, benzene, thinner or other solvents to clean the surface
of the unit. To clean, wipe with clean soft cloth and a mild detergent solution.
Do not dispose of the lamp or power adaptor with household waste.
At the end of their life cycle hand them over to a collection centre
that can recycle electrical and electronic appliances. Please check
with your Local Authority for recycling advice.
www.philex.com LED DESK LAMP - User Guide 3
1. Shade
2. Adjustable tension bolts
3. Adjustable arm
4. LED Light
5. Shaft
6. Power adaptor input socket
7. Wireless charging area
8. Time delay shutdown key
9. ON/OFF and dimmer key
10. LED colour mode key -
Natural white/Cool white/
Warm white
11. Wireless Charging LED:
Green = Charging OK
Red: Not working/
Not compatible
12. USB Charging port
Features and controls
1
2
9
10
3
4
8
5
7
612
Back View
11
Box contents
1x 1x
1x
4 LED DESK LAMP - User Guide www.philex.com
Introduction
Your fully adjustable LED lamp is ideal for bedside or desk top use. You can
select from three colour modes and dim the lamp according to your mood
using the touch controls. You can also charge a range of devices using either the
wireless charging panel, for Qi enabled devices or using the USB charging port to
charge smartphones, mobiles and tablets
Connection and light controls
Connect the PSU
6
LED Lamp - On/O
M
LED Lamp - Dimmer
M
M
>2s*
LED Lamp - Delayed switch o
40mins
M
LED Lamp - Colour mode
Natural White Cool White Warm White
Arm and Shade angle adjustment If necessary
Loosen to adjust
Then Tighten
2
*Lamp ashes 2x to show delay is set
www.philex.com LED DESK LAMP - User Guide 5
Wireless charging
Back View
11
11. Wireless Charging LED:
Green = Charging OK
Red: Not working/
Device not compatible
USB charging
62% Charged
Please Note:
You can only charge one device at a time. Either using the USB output or the
wireless charging function, not both at the same time.
Back View
62% Charged
Troubleshooting wireless charging
Problems may occur when charging or charging may not start If the thickness
of the smartphone’s case exceeds 5mm or it has a metal composition, try
removing the case before charging.
•Phones with Qi function may need to be placed slightly o centre. Optimum
charging position can vary by brand/model.
•The charging time varies depending on the charging capacity of the battery
and its current residual capacity.
•Components may heat up during the charging process. They will slowly cool
down again after the charging process has nished.
Protection function
1. Current output, overload protection. After an output overload
protection is triggered, charging will stop and the light will go out.
To restore power unplug power supply from mains and plug back in.
Specications
Power Supply Input: 100-240V~50/60Hz
LED Lamp Power Input (6): 12V𝌂2A
Wireless Output: (7) 5W
USB 2.0 Output 1 (6): 5V𝌂1A
Rated Power of Unit: 21W max.
Rated Power of LED: 4.5W
LED Colour Modes: Natural/Cool/Warm White
Colour Temperature: 2700-6500K
Colour Rendering Index (CRI): Ra≥90
Luminance: ≥1000 Lux max.
Technical Support
For further advice please visit our technical website at
http://www.philex.com/support
6 LED DESK LAMP - User Guide www.philex.com
Waste electrical and electronic products should
not be disposed of with household waste.
Please recycle where facilities exist. Check with
your Local Authority for recycling advice.
Made In China © Philex Electronic Ltd. Kingsher Wharf,
London Road, Bedford, MK42 0NX UK. 2019 V1.1
Table of contents
