iSymphony V1BLUE User manual

V1BLUE
Bluetooth Stereo Music System

1 2
IMPORTANT SAFETY INSTRUCTIONS
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE SCAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrow- head
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated ‘dangerous voltage’ within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK), NO USER SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS -The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS - All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. CLEANING - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. WATER AND MOISTURE - Do not use this product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. This appliance shall
not be exposed to dripping or splashing water and no object filled with liquids such as vases shall be placed
on the apparatus.
8. ACCESSORIES - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer instructions, and should use a mounting accessory
recommended by the manufacturer. A product and cart combination should be moved with care -quick stops, excessive force
and uneven surfaces may cause the product and cart combination to overturn.
9. VENTILATION - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in
installation, such as a bookcase or rack, unless proper ventilation is provided or the manufacturer*instructions have been
adhered to.
10. POWER SOURCES - This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION - This product may be equipped with a polarized alternating-current line plug (a plug
having one blade wider than the other).This plug will fit into the power outlet only one way. This is a safety feature: If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and
the point of exit from the product.
13. NON-USE PERIODS - The power cord of the product should be unplugged from the outlet when left unused for long
periods of time.
14. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and supporting structure,
grounding of the lead -in wire to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure 1.
15. LIGHTNING - For added protection for this product during a lightning storm, or when
it is left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will present damage to the product due to
lightning and power-line surges.
16. POWER LINES -An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
17. OVERLOADING - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
18. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the
product.
19. SERVICING - Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. DAMAGES REQUIRING SERVICE - Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the operating instructions as an improving adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to its normal operation.
e) When the product exhibits a distinct change in performance -this indicates a need for service.
21. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or having the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
22. SAFETY CHECK - Upon completion of any service or repair to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
23. HEAT - The product should be situated away from heat sources such as radiators, heat registers, stoves or other
products (including amplifiers) that produce heat.
24. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. Changes or modifications made without written approval may void the user’s
authority to operate this equipment.
CLASS 1 LASER PRODUCT
PRECAUTIONS FOR UNIT
SECURITY
Before operation, check if the voltage of the unit is in line with the local voltage.
Hold the plug to disconnect it from the mains outlet. Do not pull the power cord.
When the plug of the unit is connected to the mains outlet, the unit will be still connected to AC even of the power is
turned off.
Disconnect the plug as soon as liquid or objects enter the unit. The unit cannot be used until being checked by
experts.
Do not open the cabinet. Laser rays employed by the unit may damage eyes. Any servicing should be done by
qualified service personnel.
PLACEMENT
Put the unit where ventilation is good enough to prevent overheating.
Never put the unit in direct sunlight or near heat sources.
Never put the unit in direct sunlight or near heat sources.
To protect the pickup, do not put the unit where there is a lot of dust. If there is dust on the pickup, use a cleaning
disc to clean it. Refer to the operation instructions of the cleaning disc you bought.
CAUTION!
HAZARDOUS LASER RADIATION WHEN
OPEN AND INTERLOCK FAILED OR
DEFEATED. AVOID EXPOSURE TO BEAM
CONDENSATION
The unit is suddenly moved from a cold place to a warm place.
Use of the unit in a humid place.
In these cases, the unit will not work. Unloading the disc and leaving the unit on for about one hour will evaporate the
water, allowing the unit to function normally again.
CLEANING
Use a soft cloth with a little neutral detergent to wipe the cabinet, panel and controls. Never use abrasive paper,
polishing powder or any solvent such as alcohol or gasoline.
Moisture will appear on the pickup lens in the following cases:

3
TABLE OF CONTENTS
4
IMPORTANT SAFETY INSTRUCTIONS
PRECAUTIONS FOR UNIT
UNPACKING AND SET-UP
CONNECTIONS
LOCATION OF CONTROLS
REMOTE CONTROL
OPERATING INSTRUCTIONS
AUDIO CONTROLS
COMPATIBLE STORAGE DEVICES
COMPATIBLE AUDIO FORMATS
LOADING AND REMOVING A DISC
INSERTING AND REMOVING FLASH DEVICES
CD OPERATION
PLAYING MP3 & WINDOWS MEDIA FORMATTED AUDIO
MEMORY CARD OPERATION
USB OPERATION
BLUETOOTH OPERATION
WIRELESS iPod DOCK OPERATION
SPEAKERPHONE OPERATION
RESUMING CONNECTIONS
DISCONNECTING/REMOVING THE PAIRING
RECORDING
RADIO OPERATION
OTHER FUNCTIONS
CONNECTING EXTERNAL DEVICES
CONNECTING EXTERNAL DEVICES
WALL MOUNTING
CARE AND MAINTENANCE
iSymphony Warranty
TECHNICAL SPECIFICATIONS
1
2
4
5
7
9
10
11
12
12
12
13
14
19
23
24
25
30
32
33
33
34
35
38
40
41
42
43
44
45
Thank you for purchasing the iSymphony V1 CD Micro Music System with TUNER and USB/SD recorder.
The V1 is the world’s first compact CD audio system, a card slot for SD, MMC cards and a convenient
USB port for USB flash memory devices on the right panel. This unique unit gives you play music from
CDs, radio, or in MP3 and Windows Media format from:
SD/MMC cards
USB flash memory drives
Audio CDs including CD-R, CD-RW
MP3 or Windows Media encoded CDs
iPod
Please be sure to read this manual carefully and completely to make sure you understand all of the
exciting features and functions included in your new system. We have taken great care to make sure that
this system was in perfect working order when it left our factory. If you experience any problem with the
set-up or operation of this system please refer to the back of this manual for instructions on obtaining
customer service.
The serial number of your system is located on a label on the back panel. Please take a moment now to
locate the serial number and to write it in the space provided below for future reference. You may be
asked to provide this number if you call for customer service.
Serial Number: _______________________________
Please also take a moment to register your product online at
www.myisymphony.com/register
UNPACKING AND SET-UP
If any item is missing, consult your dealer immediately.
Carefully remove the unit from the carton and remove all packing material from the unit.
We suggest that you retain the original carton and packing materials in case it ever becomes
necessary to return your unit for service. This is the only sure way to protect the unit from damage in
transit. If you do dispose of the carton and packing materials, please do so property. We care about
our environment.
Remove any descriptive labels or stickers from the front panel of the unit. Do not remove any labels or
stickers that may be affixed to the back panel of the main unit of the speakers.
Unwind the AC cord on the back of the main unit and extend it to its full length.
Protect Your Furniture
This model is equipped with non-skid rubber feet to prevent the product from moving when you operate
the controls. These feet are made from non-migrating rubber material specially formulated to avoid leaving
any marks or stains on your furniture. However certain types of oil based furniture polishes, wood
preservatives, or cleaning sprays may cause the rubber feet to soften, and leave marks or a rubber
residue on the furniture. To prevent any damage to your furniture we strongly recommend that you
purchase small self-adhesive felt pads, available at hardware stores and home improvement centers
everywhere, and apply these pads to the bottom of the rubber feet before you place the product on fine
wooden furniture.
Check to be sure that you have all the following items in addition to the main unit:
AM antenna (x1)
FM antenna (x1)
Remote control (x1)
Batteries (x2)
Wireless iPod Dock (x1)
AC adaptor for Wireless Dock (x1)
iPod Dock Adapters (x5)
Power cable (x1)
Wall bracket (x1)

BASIC SYSTEM SETUP
Follow these 7 steps to complete basic system setup.
1) Set up and connect AM antenna, connect and extend FM antenna
FM 75 Antenna
AM
5 6
This system is designed to operate on 120V 60Hz AC house current. Connecting this system to
any other power supply could result in damage to the unit which is not covered by your warranty.
2) Connect the unit to power
3) Connect the wireless iPod dock to power
This AC adapter operates on AC 120V/60Hz. iPod dock
To “DC IN
10V” jack To AC
outlet
Cautions:
The included AC adapter is for use with
this iPod dock only. Do not use it with
other equipment.
When the iPod dock is not going to be
used for a long time, disconnect the AC
adapter from the AC outlet.
6) Power on the unit
Press the STANDBY button, the main display briefly shows “HELLO”. Then “AM 12:00”. Please refer
to p__ for setting the clock.
Press and hold the STANDBY button on the reverse side of the
dock for 2 seconds.
For setup of Bluetooth connections, refer to p__.
For setup of wall mount refer P42
To connect optional components see section Connecting External
Devices.
When connecting an iPod to this iPod Dock, please ensure that the correct adaptor plate
is used. FAILURE TO DO SO MAY RESULT IN DAMAGE TO THE iPod.
4) Select the correct iPod dock adapter
5) Install Batteries into Remote
Insert two AAA batteries into the remote control
while observing the correct (+) and (-) polarities
as shown below.
7) Power on the wireless iPod dock iPod dock
This wireless iPod Dock comes with 4 removable dock adapters to
ensure the iPod fits properly.
1. Refer to the compatibility table on p__ and select the correct
dock adapter for the iPod. Using the correct adapter ensures
the proper fit for your iPod and helps to reduce the stress on
the connector when operating the iPod.
2. Carefully align and then gently insert the iPod into the dock.
(The iPod must not be in a case or “skin”).
NOTE: The adapter for iPod nono is already installed in the dock.
NOTE: The system has polarized AC plug with one wide blade and one narrow blade. The plug will only
fit into matching polarized AC outlet.
This is a safety feature to reduce the possibility of electric
shock. If the plug will not fit in your AC outlets, your
probably have outdated non-polarized outlet. You should
have your outdated outlet changed by a qualified, licensed
electrician. Do not file the wide blade on the plug, or use an
adapter to make the plug fit into your outlet. This defeats the
safety feature and could expose you to electric shock.
!
Wider Hole
and Blade
AC outlet
Polarized AC
Cord Plug (One
blade is wider
than the other)
!
!
To place a dock adapter:
Power

7 8
16. Subwoofer Output Jack
17. AUX IN Jack
18. PHONES Jack
3
45
6
7
89
10 11
12 13
14 15
1. Microphone
2. STANDBY LED/Bluetooth
3. STANDBY/ON Button
4. FUNCTION/REJECT Button
5. ANSWER/PAIRING Button
6. Remote Sensor
7. VFD Display
8. OPEN/CLOSE Button
9. VOLUME Up + Button
10. VOLUME Down - Button
11. PLAY/PAUSE Button
12. STOP /BAND Button
13. SKIP/TUNING UP + Button
14. SKIP/TUNING DOWN - Button
15. RECORD Button
17
18
1
16
2
LOCATION OF CONTROLS
A
UXIN
PHONES
LOCATION OF CONTROLS
19 20 22
23
19. AC Power Socket
20. AM Antenna Socket
21. FM Antenna Socket
25. Power LED (red)
26. Bluetooth Status LED (blue)
27. S-VIDEO OUT
28. LINE-OUT
29. Standby/on button
30. iPod USB Sync.
31. DC IN
32. Universal iPod Dock
32
25
27
28 29 30
31
21
24
22. SD/MMC CARD Slot
23. USB Slot
24. Wall mount (assembled)
WIRELESS iPod DOCK
REAR AND RIGHT OF MAIN UNITFRONT AND LEFT OF MAIN UNIT
26

REMOTE CONTROL
910
OPERATING INSTRUCTIONS
Make sure that you have fully extended the FM antenna wire and connected the AM
antenna.
Make sure that you have installed batteries in the remote control handset.
Make sure that the system is connected to an AC outlet that is always powered.
Do not connect the system to an AC outlet controlled by a wall switch.
General Controls
Most of the main functions of this system can be operated by the controls on the front panel of the main
unit, or by the buttons on the remote control handset. If a specific function can only be operated by the
remote handset, or by the front panel controls, this will be clearly indicated in the instruction.
When operating this system with the remote control handset make sure that the IR (Infrared) transmitter
on the front of the remote handset is pointed at the remote sensor on the front panel of the main unit.
The effective operating range of the remote control is approximately 15 feet. Please note that bright
sunlight or room lighting may interfere with the remote control operation. If the remote is not operating
properly try reducing the brightness of the room or moving closer to the main unit. If this does not solve
the problem, it may be time to change the remote control battery.
1. STANDBY/ON Button
2. Equalizer Button
3. REPEAT Button
4. PRESET/ALBUM/MENU +/- Button
5. SKIP Button
6. STOP/BAND Button
7. MUTE Button
8. FUNCTION/REJECT Button
9. TIMER Button
10. ST/MONO Button
11. SLEEP Button
12. DBBS Bass Boost Button
13. PROG/CLK Button
14. RANDOM Button
15. MENU/INTRO Button
16. SKIP Button
17. SELECT ID3 / BIT RATE Button
18. RECORD Button
19. PLAY/PAUSE Button
20. VOLUME + Button
21. VOLUME - Button
22. ANSWER / PAIRING Button
10
9
1
2
3
4
5
6
7
8
11 12
13 14
15
16 17
18 19
20 21
22

11
AUDIO CONTROLS
Volume Controls
The preset equalizer allows you to adjust the sound characteristic for the most popular types of music.
Press the DBBS button on the remote control to increase the bass response. “BBS-ON” appears briefly
on the display and X-BASS remains in the lower left of the display.
Press again to cancel the Bass Boost function.
Press the MUTE button on the remote control to shut off the speakers
temporarily.
The sound stops and the “MUTE” indicator shows in the display.
Press the MUTE button again to cancel the mute function and restore
the sound.
The “MUTE” indicator disappears.
The mute function will also be canceled automatically by pressing the
VOLUME + or VOLUME – buttons.
To increase or decrease the system volume press the VOLUME + or
VOLUME – buttons on the remote control or VOLUME Control on the front
panel.
The Volume Level Indicator will appear on the display when you change
the volume level.
The level indicator ranges from VOL MIN to VOL MAX.
EQ (Electronic Preset Equalizer)
The system remembers the volume level when the power is switched off and automatically returns to the
same level when the power is switched on again.
DBBS (Dynamic Bass Boost) Control (On Remote Control Only)
Press the cycle through the following equalizer settings:
EQ button on the remote control to FLAT, CLASSIC, ROCK, POP,
JAZZ.
The appropriate EQ indicator briefly appears on the display to confirm
your selection, and your selection shown at the bottom of the display.
The system remembers the EQ setting when the power is switched ‘Off’
and returns to the same setting when the power is switched ‘On’ again.
MUTE Button (On Remote Control Only)
COMPATIBLE STORAGE DEVICES
CD USB SD MMC
This system supports playback of music from CD discs as well as USB and flash memory card devices.
IMPORTANT:
This player can play normal (pre-recorded) CD discs plus CD Recordable and CD Rewriteable discs.
The ability of this unit to play certain recordable discs may depend on the quality or physical condition
of the disc, the quality of the recording, or characteristics of the recording device or software
application. Playback cannot be guaranteed in all situations. This is not an indication of any problems
with your player.
This player is designed to play media from SD, MMC card devices and from USB flash memory
devices. That comply with the USB mass storage standard. Playback of media from USB-connected
devices such as MP3 players that generally require drivers for interaction with a PC is not supported.
Playback from all physically compatible flash devices cannot be guaranteed in all situations. This is not
an indication of any problem with your player.
COMPATIBLE AUDIO FORMATS
12
This system supports playback of songs in CD-audio (pre-recorded CDs), MP3 and Windows Media
formatted Audio (WMA). This system does not support Digital Rights Management (DRM). This system
cannot play songs purchased from iTunes or other songs in AAC format, songs in ATRAC format or songs
purchased from walmart. com and some other online music retailers. It may be possible to convert your
music to one of the playable compressed formats, or burn it to an audio CD, depending on the DRM
restrictions. If you wish to playback songs that you have purchased from iTune directly from your iPod
shuffle, please follow the instruction on page 40 for connecting the shuffle’s headphone output jack to the
system’s AUX IN inputs.
This system is compatible with MPEG1 Audio Layer 3 (MP3) 32, 44.1 or 48kHz formats. The recording
format should be in accordance with ISO9660 CD-ROM file system. MP3 file name requires MP3 or mp3
as an extension. Chinese characters cannot be displayed, although files featuring them can be played.
VBR (Variable Bit Rate) files can be played, but playing time may not be shown correctly. Up to 299 tracks/
folders can be played.
Supported Memory Card Formats
Secure Digital™ (SD)
miniSD™ (with adapter only)
microSD™ (with adapter only)
Multimedia Card (MMC)
Memory Stick™
Memory Stick Duo™ (with
adapter only)
NOTE:
• Where “with adapter only” is mentioned, you must use the
adapter to convert from the small format to full-size card
format.
Attempting to use these formats without the proper adapter
may cause damage to the memory card or the unit. Do not
attempt to insert these cards without the proper adapter.
• Maximum supported card capacity is 2GB.
IMPORTANT: This unit does not support the following card formats. Attempted use of these unsupported
formats may cause damage to the memory card or the unit. Do not attempt to insert these unsupported
cards:
• Compact Flash® (Type I and Type II)
• MicroDrive™
• Smart Media™
• xD Picture Card™

LOADING AND REMOVING A DISC
CAUTIONS:
Do not put anything except a CD into the compartment. Foreign objects can damage the mechanism.
Keep the disc compartment closed when not in use to prevent dirt and dust from entering the
mechanism.
Never place more than one disc into the disc compartment at any time.
1) Press the OPEN/CLOSE button on front panel to open
the CD door.
2) Load a disc into the player with the printed label facing out.
3) To remove a disc, press the OPEN/CLOSE button and
remove the disc from the tray only when it has fully opened.
13

15
INSERTING AND REMOVING FLASH DEVICES
USB
SD MMC
Flash devices are inserted into compatible openings on the right of the unit.
Insert the USB connector into the socket on the unit and press
gently to seat. The connector can only be inserted one way.
Remove the device by gently pulling it out of the socket.
INSERTING AND REMOVING FLASH MEMORY CARD DEVICES
Insert the card into the slot by gently pressing into position
until it locks in place. Cards can only be inserted one way.
Remove the card by gently pulling it out of the slot.
Be sure to use the proper card adapter if required. Failure to use the correct adapter may cause
damage to the memory card or the unit.
Only one type of memory card can be inserted at one time.
IMPORTANT:
INSERTING AND REMOVING USB FLASH MEMORY DEVICES
USB DISK
SD/MMC
CD OPERATION
Normal Playback
Press the FUNCTION button to select CD function.
Press the OPEN/CLOSE button on front panel to open the CD door.
Load a disc into the player with the printed label facing out.
After reading the disc the display will show the total
tracks and playing time.
Note:
The reading time may be longer if you are using CD-R or CD-RW (rewritable) discs. This is normal and
not an indication of any problem with your unit.
Press the OPEN/CLOSE button to close the CD door.
The display will show flashing “READ” as the player
reads the Table Of Contents on the disc.
14

Press the PLAY/PAUSE button to begin playback.
Adjust the VOLUME, DBBS and EQ controls as desired.
Playback will continue until all tracks on the disc have been played, then the player stops and the
display shows the total tracks number and playing time on the disc.
To stop playback at any time, press the STOP button.
Pause Control
Skip Track and High Speed Music Search
Repeat Playback (On Remote Control Only)
The Repeat function in this system allows you to continuously repeat a single track, or the entire disc. The
Repeat function can be activated during playback or while the player is stopped.
One Track Repeat
Select the track to be repeated and begin playback.
Press the REPEAT button on remote control once.
The indicator appears in the display and the selected
track will be repeated continuously.
All Tracks Repeat
Load the disc in the player and begin playback.
Press the REPEAT button on the remote control twice.
Random Play back (On Remote Control Only)
The Random playback feature allows you play all the tracks on the disc in random order.
You can select random playback while the disc is playing or when the player is stopped.
Load a CD in the player as usual and then press the RANDOM button on the remote control handset.
The RNDM indicator appears in the display.
The player will randomly select a track from the disc and begin playback. Random playback will
continue until all tracks have played once, then the player stops.
To stop Random playback, press the RANDOM button on the remote control again.
The RNDM indicator disappears and normal playback will resume from that point.
16 17
During playback, repeatedly press the SKIP/TUNING or buttons to skip to higher or lower
numbered tracks. Playback will begin on the selected track.
During playback, depress and hold the SKIP/TUNING or buttons to search within a track at
high speed to locate a specific musical passage.
Release the SKIP/TUNING or buttons when you hear the desired passage.
Normal speed playback will resume at that point.
To pause temporarily during CD playback
The sound stops and the elapsed time flashes in the display,
but the disc continues spinning.
Press the PLAY/PAUSE button once more to cancel Pause
mode and resume playback at the same point, the elapsed time
stops flashing.
The ALL indicator appears in the display. All tracks on
the disc will be repeated continuously.
To cancel Repeat playback mode press the REPEAT button until the ALL indicators disappear from
the display.
Repeat mode can also be canceled by opening the CD tray, switching to the TUNER or AUX mode, or
pressing the STANDBY/ON button to return the system to the Standby (Off) mode.
Press the PLAY/PAUSE button.

INTRO Scan Play back (On Remote Control Only)
This feature allows you to play just the first 10 seconds of each track on the disc. This may be useful when
you are trying to locate a specific song but you do not remember the track number.
Load the disc as usual and wait until the display shows the total playing time and number of tracks.
Press the MENU/INTRO button on the remote control.
The player will play the first 10 seconds of each track automatically.
When the first 10 seconds of the last track has played the player stops and the display again shows the
total playing time and number of tracks on the disc.
18 19
The INTRO indicator will appear in the display.
To cancel the Intro mode press the MENU/INTRO button once more until the INTRO indicator
disappears.
Programmed Playback
The Programmed Playback feature allows you to program a total of up to 64 tracks in any desired order.
You may program the same track to play several times within a program sequence if desired.
Note: You cannot program tracks during playback . If a disc is playing press the STOP button first to
stop playback before beginning the programming steps below .
1. Load the disc in the player and wait until the player has read
the Table of Contents of the disc.
2. Press the PROG/CLK button on the remote control.
The PRG indicator, Program Memory “P- 01” and Track
“00” will appear in the display .
3. Then press the SKIP/TUNING or buttons to
select the first track on the disc to be programmed.
( Example: Track 07) .
4. Press the PROG/CLK button again to enter Track 07 in
program memory #1.
The program memory number advances to “P- 02”.
5. Repeat steps 3 and 4 selecting the desired Track number each time until you have entered up to 64
tracks in the CD program memory.
6. Press the PLAY/PAUSE button to begin programmed playback .
The PRG indicator remains 5 seconds on display.
The player will play all the tracks that you program
med in the desired sequence.
After the last programmed track has played the player stops, but the programmed sequence remains in
the memory.
To play the programmed sequence again, press the PROG/CLK button then the PLAY/PAUSE
button.
To cancel the programmed sequence from the memory press the STOP button at programming mode.
Programmed Repeat Playback
You can use the Programmed and Repeat Play back functions together to continuously repeat a
programmed sequence.
Program up to 64 tracks as described above.
Press the REPEAT button on the remote control twice.
Press the PLAY/PAUSE button to begin Programmed
Repeat Playback. The programmed sequence will be repeated
continuously.

PLAYING MP3 & WMA CDS
You may see the flashing “READ” indicator for a minute
or more before playback begins. This is normal
and not an indication of any problem with your player.
Most of the normal CD operations described in this manual also apply to MP3/WMA CDs. However there
are a few differences in MP3/WMA CD playback functions, and these are described on the following
pages.
MP3/WMA CD “Reading” Time And Display Information
After you load an MP3/WMA CD in the player the player will read each of the ‘Directories’ (or ‘Albums’) on
the disc, one at a time, and display the Directory Number and the cumulative number of tracks in the
directories that have already been read.
20 21
Because MP3/WMA CDs contain so much more information than normal CDs this CD player will take
longer to read the table of contents information on an MP3/WMA disc.
For example if we insert an MP3/WMA CD containing 09
‘Directories’ (or ‘Albums’) and a total of 193 “files” or tracks,
the display will shows below “MP3” or “WMA” indicator the
format of the files on the disc.
Press the PRESET/ALBUM/MENU + button repeatedly to
select album “ 03”. The track will show “48”
Press the SKIP/TUNING button five times the
display shows Track “53”.
MP3/WMA CD Playback
To skip quickly from a track in one directory to a track in another directory, proceed as
follows:
The PLAY/PAUSE, SKIP/TUNING , SKIP/TUNING and STOP controls have the same
functions for MP3/WMA CDs as they do for normal CDs.
Load your MP3/WMA CD in the player, wait until the reading process is completed.
Example: Let’s assume that you want to skip to Directory # 03/Track # 005.
Press the PLAY/PAUSE button to start playback.
MP3/WMA CD Repeat Playback (On Remote Control Only)
There are 3 Repeat Playback options with MP3/WMA CDs. In addition to the Repeat 1 Track and Repeat
All Tracks options which are the same for normal CDs, you may also select Directory Repeat Mode to
repeat all the tracks contained in a single Directory (Album).
• To repeat a single track on an MP3/WMA CD
Select the track to be repeated and start playback as usual.
Press the REPEAT button on the remote control once.
The indicator appears and the selected track
will be repeated continuously.
• To repeat all the tracks on an MP3/WMA CD
Begin playback as usual.
Press the REPEAT button twice.
The ALL indicators appear on the display and all the tracks
on the disc will be repeated continuously.
• To repeat all the tracks in a single Directory (or Album)
Select the directory to be repeat playback as usual.
Press the REPEAT button 3 times.
Both the ALBUM and indicators appear in the display and
all the tracks in the directory will be repeated continuously.
Press the REPEAT button until the “ALBUM ALL” indicators disappear.
• To cancel Repeat Playback

22 23
Press and hold the SELECT ID3/BIT RATE button to scroll through the “ID3 text” information. If the
information was properly inserted when the files were created, the display will show the song TITLE,
ARTIST name, and ALBUM name. If the album was not properly named, the display will show
“UNKNOWN”
Press the SELECT ID3/BIT RATE button again to return to Track and Play-time display.
MP3/WMA CD Intro Scan and Random Playback Modes (On Remote Control Only)
These functions operate the same way for MP3/WMA CDs as they do for normal CDs.
Intro Scan
Load your MP3/WMA CD in the player, wait until the reading
process is completed.
Press the INTRO button, the “INTRO” indicator appears in
the display and begins Intro Scan playback. The player will
play the first 10 seconds of each track on the disc.
Random Playback
Load your MP3/WMA CD in the player, wait until the reading
process is completed.
Press the RANDOM button the “RNDM” indicator appears in
the display.
The player will play all the tracks on the disc in Random
order.
ID3 Track Information Display
When you create a CD on your computer containing MP3/WMA audio files, the software you use to create
the disc will normally allow you to input the name of the artist, the name of the album, and the titles of the
individual songs.
To display ID3 Track Information
1. Press the PROG/CLK button on the remote control.
MP3/WMA CD Programmed Playback
When programming the tracks on an MP3/WMA CD you must also select the Directory Number of the
tracks being programmed.
You can program up to 64 tracks on an MP3/WMA CD, same as for a normal CD.
Programming can only be done while the player is in the Stop mode. If the MP3/WMA disc is playing,
first press the STOP button to stop playback, then follow the programming steps below.
The display shows Album “01”.
Track “001”, Program Number “P –01” and “PRG”
indicator appear.
2. Press the PRESET/ALBUM/MENU + button repeatedly
to select Album #05.
(The display shows Track #102, it means the first track
of Album #05 is #102.)
4. Press the PROG/CLK button again to enter Track 107
in program memory P- 01.
The program memory number advances to “P- 02”.
In this example the MP3/WMA CD contains a total of 09 Directories (Albums) and 193 Tracks (Files).
Let’s assume that the first track we want to program is Track #03 in Album #05.
3. Press the SKIP/TUNING button repeatedly
to select track # 05 of Album #05.
After you have entered up to 64 tracks in the Program Memory, press the PLAY/PAUSE button to
begin programmed playback.
5. Repeat Steps 2 through 4 to enter up to 64 tracks in the
program memory.

24 25
Note: The memory card slot on this system enables playback of songs only in MP3 and WMA formats
(without Digital Rights Management (DRM)). It cannot play songs purchased from iTunes or other songs
in AAC format, songs in ATRAC format or songs purchased from walmart.com and some other online
music retailers. It may be possible to convert your music to one of the playable compressed formats, or
burn it to an audio CD, depending on the DRM restrictions.
MEMORY CARD OPERATION
Playing MP3/WMA Audio Files Stored On SD/MMC Memory Cards
USB OPERATION
Playing MP3/WMA Audio Files On Portable USB Storage Device
Note: The USB port on this system enables playback of songs only in MP3 and WMA formats (without
Digital Rights Management (DRM)). It cannot play songs purchased from iTunes or other songs in AAC
format, songs in ATRAC format or songs purchased from walmart.com and some other online music
retailers. It may be possible to convert your music to one of the playable compressed formats, or burn it to
an audio CD, depending on the DRM restrictions. If you wish to playback songs that you have purchased
from iTune directly from your iPod shuffle, please follow the instruction on page 40 for connecting the
shuffle’s headphone output jack to the system’s AUX IN inputs.
The player will read the information on the card and the display will
show the total number of files (tracks) and directories (albums) on
the card.
Press the FUNCTION button repeatedly until the main display
shows "CARD".
Insert the SD or MMC flash memory card containing MP3/ WMA
audio files into the card slot by gently pressing into position until it
looks in place. Cards can only be inserted one way.
Press the PLAY/PAUSE button to begin playback.
Adjust the VOLUME, EQ, and DBBS controls as desired.
Press SKIP TUNING or buttons to skip tracks.
Press PRESET/ALBUM/MENU "+" or "–" buttons to skip albums.
Press SELECT ID3/BIT RATE button to display title, album and artist information.
Playback will continue until the last track has played and then the display will again show the total number
of tracks, albums on the card.
Press STOP button to stop playback at any time.
The player will read the information on the usb and the display will
show the total number of files (tracks) and directories (albums) on
the card.
Press the FUNCTION button repeatedly until the main display
shows "USB".
Insert the USB flash containing MP3/ WMA audio files into the usb
port by gently pressing into position until it looks in place. USB can
only be inserted one way.
Press the PLAY/PAUSE button to begin playback.
Adjust the VOLUME, EQ, and DBBS controls as desired.
Press SKIP TUNING or buttons to skip tracks.
Press PRESET/ALBUM/MENU "+" or "–" buttons to skip albums.
Press SELECT ID3/BIT RATE button to display title, album and artist information.
Playback will continue until the last track has played and then the display will again show the total number
of tracks, albums on the usb.
Press STOP button to stop playback at any time.

BLUETOOTH OPERATION
Main unit status indicator
Bluetooth Controls and Messages
At the center of managing Bluetooth connections are several control and display mechanisms:
ANSWER/PAIRING button on both the remote and main unit
Status indicator on the main unit
Main display
Audio confirmation messages
These in combination with the controls on your Bluetooth enabled device allow you to manage Bluetooth
connections with the V1.
Main unit status indicator
DISPLAY MESSAGE Audio Message Status indicator Interpretation
CLOCK ONLY Red Standby
Blue flashing rapidly Powering on
PAIRING Blue solid V1 is visible to any devices
that wish to pair with it
PHONE
CONNECTED Two quick beeps, high tone Blue flashing slowly Mobile phone has connected using Bluetooth headset profile
STEREO
CONNECTED Two quick beeps, high tone Blue flashing slowly
Capable device has connected
using Bluetooth stereo profile
(Advanced Audio Distribution
Profile A2DP)
DISCONNECT PHONE One long beep Blue flashing rapidly Phone disconnected
DISCONNECT STEREO
HELLO
DISCONNECT ALL
FAILED
DIALING
CALLING Ringing, phone
dependent
PHONE NUMBER Caller ID
IN CALL Call started
CALL END Call ended
TRANSFER Transfer from unit to
handset or back
Standby
Power ON waiting pairing
Pairing mode
Power ON BT connected
Red
Blue flashing rapidly
blue solid
Blue flashing slowly
Making Bluetooth Audio Connections
Please follow the steps below for pairing and connecting your devices for the first time.
There Bluetooth connectivity of your V1 enables it to share audio with many Bluetooth
capable devices including the iSymphony bluetooth Wireless Dock, mobile phones,
personal computers and PDAs. V1 supports the following Bluetooth profile and functionality:
Getting Started
Bluetooth Profile Description Application
Hands-free Profile (HFP) Mono audio connection
with controls such as
redial, volume and transfer
Mobile phone speakerphone/
hands-free operation
Advanced Audio
Distribution Profile (A2DP) High-quality audio connection Streaming of stereo music
from iPod dock, PC, capable
mobile phone
Audio Video Remote Device remote control Control connected device
Control Profile (AVRCP) Including iPod from V1
remote control
PAIRING
A B
Passkey
exchanged,
relationship
established A B
CONNECTION
Profile 1
Profile 2
Audio exchange
according to
profiles
Source Receiver
Bluetooth devices each take different roles in a connection. One is considered a source of audio, the
other a receiver. The V1 is considered a receiver - it receives audio information over a Bluetooth
connection from a dock, a mobile phone etc.
Bluetooth devices support various operating profiles that define the terms of data exchange, allowing
them to communicate with each other in different ways suited to different tasks. For this application,
we are concerned with different types of audio connection, for example mono and stereo.
Bluetooth devices need to be paired with each other before connection. This allows them to establish a
trusted relationship by learning (by user input) a shared secret known as a “passkey”. Since most
Bluetooth devices are portable, they may connect to different devices, depending on their location. To
support this, pairing information for many devices can be “remembered” by each device, and recalled
for later re-connection.
Once devices are paired, they can establish a connection and begin to share data with each other.
Power on
“HELLO” Pair + connect dock Pair + connect mobile phone Enjoy!
2726

2928
(2) Connecting a Mobile Phone (Headset profile)
(1) Connecting the iSymphony Wireless iPod Dock (A2DP)
NOTE: Please complete this procedure BEFORE connecting a mobile phone.
Ensure that the AC adaptor is plugged into the wireless iPod dock. The orange power LED will be
illuminated (show location)
Place the V1 main unit and the wireless iPod dock where they are no more than one meter apart.
Press and hold the ANSWER button on the main unit or remote control for 5 sec.
PAIRING is shown on the display and
The status indicator shows solid blue slowly.
The unit is ready to pair.
Depress the B.T ON/OFF button on the wireless dock for 2 seconds.
Blue LED flashes quickly.
Hold the B/T button about 6 seconds, LED solid.
Dock is powered and ready to pair
Within 20 seconds pairing and connection is complete.
Turn to page 32 for dock operating instructions. NEED to make sure there a section about how to use
the dock once you’ve got it connected.
If the pairing cannot be completed within one minute, the display shows “FAILED”. Check
connections and try again.
NOTE: Please complete this procedure AFTER the wireless iPod dock is connected.
NOTE - This procedure requires a mobile phone with Bluetooth capability. In order to create new
Bluetooth connection you will need some familiarity with the Bluetooth functions of your mobile phone.
Each phone operates slightly differently, so we can give only very general guidelines in this user manual
for using phone Bluetooth functions. Please take the time to familiarize yourself with powering Bluetooth
on and off, searching for, pairing with and connecting to other Bluetooth devices.
Ensure that Bluetooth radio on your mobile phone is powered on. Please refer to the phone user
manual for details.
Place the V1 main unit and the mobile phone where they are no more than one meter apart.
Press and hold the ANSWER button on the main unit or remote control for 5 sec.
Set the mobile phone to search for Bluetooth devices and follow the instructions on the phone’s screen.
Please refer to the phone user manual for details. You will recognize the iSymphony main unit by its
Bluetooth name “iSymphony V1”.
Select the iSymphony V1 and commence pairing with it. When prompted for a passkey, enter “0000”.
Select the paired device for connection. Within a few seconds connection is complete.
Your phone is now connected to the V1 main unit. Turn to page 32 for speaker phone operation
instructions.
NOTE - you do not need to pair a mobile phone every time you wish to reconnect it. Pairing information
for up to 7 devices is automatically stored by V1.
If the pairing cannot be completed within one minute, the display shows “FAILED”. Check
connections and settings on your mobile phone and try again.
PAIRING is shown on the display and
The status indicator off.
The unit is ready to pair.
Main display shows “STEREO CONNECTED”
Status indicator slowly flashes blue.
The main display shows “PHONE CONNECTED”
Status indicator slowly flashes blue.
(3) Connecting a Stereo Mobile Phone or other A2DP - capable Device
Place the V1 main unit and the device where they are no more than one meter apart.
Press and hold the ANSWER button on the main unit or remote control for 5 sec.
Set the device to search for Bluetooth devices and follow the instructions on the phone’s screen. You
will recognize the iSymphony main unit by its Bluetooth name “iSymphony V1”. Please refer to the
phone user manual for details.
Select the iSymphony V1 and commence pairing with it. When prompted for a pass-code, enter “0000”.
Select the paired device for connection. Within a few seconds connection is complete.
Your phone is now connected to the V1 main unit for both speakerphone and music streaming functions.
NOTE ABOUT HEADPHONES - Headphones cannot be connected to the V1 main unit, however they
can be connected to the wireless iPod dock directly. Please refer to page for details. Headphones are
Bluetooth receiving devices, as is V1, and connections between two receivers are not permitted under
the Bluetooth architecture. V1 requires connection to a Bluetooth source such as a mobile phone or dock.
Compatibility cannot be guaranteed with all Bluetooth headsets.
If you do not see both these messages, it means that one or other audio profile was not connected.
Depending on the type of device you are attempting to connect, this may be acceptable. The
reason may be that one or other of the profiles is already connected to another device. Check that
you do not have another device already connected and try again.
NOTE - This connection requires a device supporting the Bluetooth A2DP profile for stereo music
connection. Please familiarize yourself with the Bluetooth capabilities of your device before connecting.
IMPORTANT - If you are connecting and A2DP - capable phone and you wish to use both the A2DP
(music) and hands-free (speakerphone) functions of your phone together, you must power off the
wireless iPod dock before connecting the A2DP phone. A phone supporting A2DP cannot make an A2DP
connection to the system if the wireless dock (also using A2DP) is already connected; only one device
supporting A2DP may be connected at one time. If you attempt to connect an A2DP phone after
connecting the dock, then A2DP profile will not be connected and only speakerphone functions will be
supported.
NOTE - some A2DP phones will only allow connection of the A2DP profile if the headset profile is
connected too. If you encounter this situation, consider using the phone with V1 exclusively, that is
without any other Bluetooth devices connected.
Ensure that Bluetooth radio on your device is powered on. Please refer to the device user manual for
details.
(4) Connecting a PCs, PDAs and Other Bluetooth Devices SKYPE
NOTE ABOUT SIMPLE BLUETOOTH TRANSMITTERS AND DONGLES - The ability of V1 to connect to
simple Bluetooth transmitters and dongles made by other manufacturers may be limited by part of the
Bluetooth security mechanism. The V1 requires a device to provide a passkey of “0000” for pairing and
connection. It is the responsibility of the connecting (source) device to provide the passkey. In the case
that a transmitter or dongle is hard-wired with a passkey other than “0000” for a “matched” receiver
device (such as in the case of a bundled dongle and headset), it cannot connect to V1. Usually the
Bluetooth source device has a user interface to allow input of whatever passkey is required to access the
receiver. In the case of dongles and simple transmitters, this user interface does not exist, the passkey
cannot be entered correctly and the connection cannot be made.
NOTE ABOUT CONNECTING TO PCs - win XP doesn’t support much in the way of Bt natively, including
A2DP.
PAIRING is shown on the display and
The status indicator off.
The unit is ready to pair.
The main display shows “PHONE CONNECTED” followed by “STEREO CONNECTED” as both
audio profiles are connected.
You may be asked to grant permission for “AVRCP” or “Remote Control” functions. You should
grant this permission for complete connection.

Your V1 can connect with many other Bluetooth source devices including PDAs and PCs. The general
connection procedure is as follows. Please refer to the user manual of the device you wish to connect for
specific operations on that device:
Place the V1 main unit and the device you which to connect where they are no more than one meter
apart.
Press and hold the ANSWER button on the main unit or remote control for 5 sec.
Set the connecting device to search for Bluetooth devices and follow the instructions on the device’s
screen. Please refer to the device user manual for details. You will recognize the iSymphony main unit
by its Bluetooth name “iSymphony V1”.
Select the iSymphony V1 and commence pairing with it. When prompted for a pass-code, enter “0000”.
Select the paired device for connection.
PAIRING is shown on the display and
The status indicator shows solid blue.
The unit is ready to pair.
Within a few seconds connection is complete.
The main display shows connections as they are successfully completed.
3130
WIRELESS iPod DOCK OPERATION
Connect to PC whilst docked
An docked iPod can be connected to a PC using the
iPod USB Sync socket on the rear of the iPod Dock. To
do this, insert the iPod end of the iPod PC cable (NOT
SUPPLIED) to the socket on the rear of the iPod Dock
and connect to the PC in the normal manner. Files can
then be uploaded to the iPod using iTunes.
USB
CONNECTOR
iPod dock
Using the AC adapter
This AC adapter operates on AC 120V/60Hz. iPod dock
To “DC IN
10V” jack To AC
outlet
Cautions:
!The included AC adapter is for use with
this iPod dock only. Do not use it with
other equipment.
When the iPod dock is not going to be
used for a long time, disconnect the AC
adapter from the AC outlet.
When connecting an iPod to this iPod Dock, please ensure that the correct adaptor plate
is used. FAILURE TO DO SO MAY RESULT IN DAMAGE TO THE iPod.
This iPod Dock comes with 4 removable dock adapters to ensure the
iPod fits properly in the dock of the iPod Dock.
To place a dock adapter:
1. Refer to the compatibility table below and select the correct
dock adapter for the iPod. Using the correct adapter ensures
the proper fit for your iPod and helps to reduce the stress on
the connector when operating the iPod.
2. Carefully align and then gently insert the iPod into the dock.
(The iPod must not be in a case or “skin”).
3. To remove/replace an dock adapter, first remove the iPod ,
then grip the insert and pull gently upwards.
NOTE: The adapter for iPod nono is already installed in the dock in
the top of the iPod Dock.

Controlling Music Playback
Ensure the wireless iPod dock is paired and connected to the main unit.
Select iPod/BLUETOOTH mode on the main unit using the FUNCTION button.
Press PLAY on the iPod, main unit or remote. The music playback will start.
The AVRCP Remote Control connection allows you to control all of the iPod’s functions from the remote
control, including menu navigation, and to select tracks, play, pause and stop and from the main unit.
iPod Dock Operation
The speakerphone functions of V1 allow seamless transitioning between listening to music and receiving
or placing phone calls. When you make or receive a call music playback will pause, and restart again once
the call is complete. Incoming calls are notified with a call alert tone.
Getting Started
Ensure your mobile phone is paired and connected to the main unit.
Select any mode on the main unit using the FUNCTION button. You may listen to music if you desire.
Dial the phone as usual and press SEND on the phone.
To end the call, press FUNCTION/ (red hang up symbol) on your mobile phone, on the main unit
or on the remote.
Placing a Call
To redial last number press and hold ANSWER button for 5 seconds. The call will be placed
automatically.
Control Location Function
Main unit, remote Press to play, press again to pause
Main unit, remote Press once to select track. Hold to fast forward/reverse.
Main unit, remote Press to stop
Remote iPod MENU function - go up a level
Remote iPod SELECT function
Remote iPod scroll up
Remote iPod scroll down
MENU
SELECT
+
-
Music playback will automatically pause.
Display will show DIALING.
You will hear the ringing tone through the system.
Display shows IN CALL when other party answers.
Display shows END CALL
Music playback automatically resumes.
Receiving a Call
When a call is placed to your mobile you will hear an incoming call alert tone through the speakers of the
main unit.
Display will show CALLING and the caller’s phone number, if available.
To accept the call press the ANSWER button on the main unit or remote once or answer the call via
your mobile handset in the normal way.
To reject the call press the FUNCTION/REJECT button on the main unit or remote once, or reject the
call via your mobile handset in the normal way.
To transfer sound from the speaker to your mobile handset during a call, press and ANSWER for 2
seconds.
Display shows TRANSFER
The display shows IN CALL
3332
Dock Adaptor Compatibility
ABCD
5G with Video
1GB
2GB
4GB
photo 20GB
30GB
40GB
60GB
4G 20GB
40GB
mini 4GB
6GB
3G 10GB
15GB
20GB
30GB
40GB
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
80GB X
30GB
60GB
(1st generation)
(2nd generation)
nano 2GB
4GB
8GB
X
X
X
nano
SPEAKERPHONE OPERATION

Resuming connections
3534
Once you have paired the devices you use regularly you will not need to pair them again unless you lose
AC power. Pairing information is stored for reconnection whenever you wish. Sometimes reconnection is
automatic.
To transfer back, press and hold ANSWER again.
To end the call, press FUNCTION/ (red hang up symbol), on the main unit or on the remote or
end the call via your mobile handset in the normal way.
The nature of the incoming call alert tone depends on the features supported by your mobile phone - it
may be the ring tone set on your mobile, or a default tone generated by the system.
IMPORTANT - The above functions are only applicable to mobile handsets embedded with Bluetooth
Hands-free Profile. Functionality may vary depending on the model of mobile handset. Please refer to
your mobile handset user guide for additional information.
A2DP Device operation - Listening to Stereo Audio from an A2DP - capable Mobile Phone or Other
Device.
NOTE - These operations require a device supporting the Bluetooth A2DP profile for stereo music
connection. Please familiarize yourself with the Bluetooth capabilities of your device before connecting.
Follow instructions page 30 to pair and connect device.
Select iPod/BLUETOOTH mode using the FUNCTION button.
Press PLAY on the device, the remote or the V1 main unit. Playback will commence.
To enable the Remote Control Function (AVRCP), your source device must support the AVRCP profile.
Compatibility cannot be guaranteed.
Control Location Function
Main unit, remote Press to play, press again to pause
Main unit, remote Press once to select track. Hold to fast forward/reverse.
Main unit, remote Press to stop
Device Control the volume level of the streaming audio
VOLUME
Each time when you turn on the V1 unit by pressing the POWER button, it will automatically reactivate the
pairing to resume the connection between the V1 unit and iPod dock or the mobile handset. This function
can depend on the settings of your connecting device - for example some phones allow you to choose
reconnection as “Automatic” or “Ask”.
You may want to reset the V1 Main Unit to its original settings. To do so, all current pairings will be
cleared.
1. Press and hold the STOP key for 10 seconds until the display is shown “DISCONN”.
2. Release the STOP key.
Display shows TRANSFER
Display shows END CALL
Music playback automatically resumes
If the other party ends the call first, music will resume automatically.
Using the dock with other BT receivers:
Stereo support only:
- Headphone stereo
- Other stereo device
- PC
One device multiple connections - managing overlapping capabilites:
Normally one device is music - focused (dock or music phone), one is voice (phone). Occasionally it will
arise that you wish to connect two devices with overlapping capabilities. Such as music phone and dock,
or phone + music phone. The way to do this requires controlling order of connection and managing the
connecting devices.
More than likely, the V1 is already paired. Start from the beginning.
1. Reset V1
2. Connect the device you’re having trouble with. Did it connect? Problem solved?
3. Yes. But now I cant pair something else. You are fighting for profile access. Now you need to start
thinking about ORDER or connection.
4. Some combinations aren’t possible - devices are greedy and demand all the available profiles, and you
can select which to connect. Sometimes you can control on the other devices.
RECORDING SPEAKING to a USB or SD device
The unit allows you to record the speaking to the external USB or SD device.
When you are speaking a phone through the Bluetooth.1.
2. Insert a USB or SD.
3. Press REC. button.
4. “USB” or “CARD” and “REC” appear, flashing.
5. To stop recording, first press STOP/BAND or REC. button then unplug the USB or SD device.
RECORDING
Before recording allow you to select bit rate 128KBPS, 32KBPS, 48KBPS, 64KBPS and 96KBPS.
Note: Radio AM band cannot proceeded recording function.
RECORDING FROM DEVICE (USB, SD)
1. First press the SELECT ID3/BIT RATE button, then press SKIP/TUNING or buttons to
select bit rate
2. After selected bit rate going to record.
Disconnecting/Removing the Pairing
To hold the incoming call, press the ANSWER button once.
Display shows HOLD

Hints For better Reception
FM:
AM
The FM lead wire antenna on the back panel should be extended to its full length. You may also
have to vary the direction of this antenna until you find the position that provides the best reception.
AM: Insert the socket of loop aerial into the AM antenna socket on the unit. Adjust the position of the
loop aerial until you find the position that provides the best reception for your favorite AM stations.
36 37
RADIO OPERATION
Press the FUNCTION button to select the Tuner function.
AM or FM frequency will appear on the display.
Tune to the desired station as follows:
Manual Tuning
Repeatedly press the SKIP/TUNING or buttons until the display shows the exact
frequency of the desired station. Use the Manual Tuning method to tune to weak or distant stations that
are not strong enough to be recognized by the Automatic Tuning system.
Automatic Tuning
Depress and hold the SKIP/TUNING or buttons until the display begins to move, then
release the buttons. The Tuner will search up or down the band for the next strong signal and stop on
that station. Repeat this procedure until the tuner stops on your desired station.
FM Stereo signal is indicated by the ST indicator.
Press the STOP/BAND button to switch between the AM and
FM bands.
Press the ST/MONO button on the remote control to select the FM
Mono mode.
If the FM Stereo reception is noisy or weak.
FM 75 Antenna