iSystem I120 User manual
System
®
Messebau
6x 6x 2x
3x
6x
16x
4x
8x
8x
consisting of:
- 6x Aluminium proles à 1250 mm incl. 8 bores
- 6x Aluminium proles à 1250 mm incl. 8 bores and adjustable feet
- 2x Aluminium proles à 300 mm incl. 8 bores for fascia sign frame
- 8x Aluminium cross proles with pointed screws for the lower and upper mounting
- 4x Aluminium cross proles for the middle mounting
- 8x Aluminium cross proles with pointed screws for fascia sign frame
- 16x H-proles à 1200mm to stabilize the panels
- 6x Extension bolts for aluminium prole
- 3x Longarm spothlights 450mm incl. bulb
Assembly instructions
for the exhibition stand I120
System
®
Messebau
Important
Pointed screws must be used for all proles with screw holes.
1. Mount the bottom cross proles
including the pointed screws to
form the corner.
2. Then mount the cross proles.
3. Mount the required lower cross
proles including pointed screws.
4. Then mount the cross proles
and insert the bolts in the prole.
System
®
Messebau
5. Push the top proles onto the
bolts. Ensure that the holes face
upward.
6. Then mount the cross proles
including the pointed screws.
7. Then mount the rst part of the
fascia sign frame
8. Then mount the rest of the fascia sign frame.
If necessary, use the adjustable feet to
compensate for unevenness in the oor.
Table of contents
