iSystem I120 User manual

System
®
Messebau
6x 6x 2x
3x
6x
16x
4x
8x
8x
consisting of:
- 6x Aluminium proles à 1250 mm incl. 8 bores
- 6x Aluminium proles à 1250 mm incl. 8 bores and adjustable feet
- 2x Aluminium proles à 300 mm incl. 8 bores for fascia sign frame
- 8x Aluminium cross proles with pointed screws for the lower and upper mounting
- 4x Aluminium cross proles for the middle mounting
- 8x Aluminium cross proles with pointed screws for fascia sign frame
- 16x H-proles à 1200mm to stabilize the panels
- 6x Extension bolts for aluminium prole
- 3x Longarm spothlights 450mm incl. bulb
Assembly instructions
for the exhibition stand I120

System
®
Messebau
Important
Pointed screws must be used for all proles with screw holes.
1. Mount the bottom cross proles
including the pointed screws to
form the corner.
2. Then mount the cross proles.
3. Mount the required lower cross
proles including pointed screws.
4. Then mount the cross proles
and insert the bolts in the prole.

System
®
Messebau
5. Push the top proles onto the
bolts. Ensure that the holes face
upward.
6. Then mount the cross proles
including the pointed screws.
7. Then mount the rst part of the
fascia sign frame
8. Then mount the rest of the fascia sign frame.
If necessary, use the adjustable feet to
compensate for unevenness in the oor.