ITC Maia User manual

3030 Corporate Grove Dr • Hudsonville • MI • 49426
Phone: [phone] • www.itc-us.com • [email protected] • DOC#: 710-00196 • Rev A: 08/31/21
For warranty information please visit www.itc-us.com/warranty
Maia Desk Lamp Operating Instructions
SAFETY INSTRUCTIONS
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS
To avoid a hazard to children, account for all parts and destroy all packaging materials.
The power supply must be installed according to the National Electrical Code and local building codes.
If you are unsure about the installation or use of the power supply, consult a qualied electrician.
To reduce the risk of re and electrical shock, only use the power supply provided.
The lamp should not be installed in areas with excessive heat near the power supply. Consult a qualied lighting professional if uncertain
about specic applications.
Do not use in a wet location
Use wire management to ensure that any excess cords are tucked away and will not pose a tripping hazard.
Handling
When carrying the lamp, one hand should support the base and the other hand should support the vertical arm. The lamp should never be
carried by the horizontal or vertical arm alone.
Cleaning Instructions
Use a soft, dry cloth to clean or dust the lamp. Do not use alcohol, abrasives or harsh solvents.
WARRANTY
ITC warrants the light to be free from defects in material and workmanship for 5 years from the date of service on the light xture, including
the light source and 3 years on the power supply.
To the extent allowed by law, ITC makes no other warranty, either expressed or implied, including any warranty of merchantability or tness
for a particular purpose. ITC will not be liable for any consequential or incidental damages. This warranty applies only to products sold
within the United States of America and the Commonwealth of Canada.
There are no user-serviceable parts inside the lamp. Opening lamp will void warranty.
PARTS NEEDED:
Maia Desk Lamp Class 2 Power Supply

3030 Corporate Grove Dr • Hudsonville • MI • 49426
Phone: [phone] • www.itc-us.com • [email protected] • DOC#: 710-00196 • Rev A: 08/31/21
For warranty information please visit www.itc-us.com/warranty
1. To power the light:
Attach power cord on lamp to power supply provided. Plug
power supply into wall.
2. Operating lamp:
Press the on/off button on the underside of the lamp
head or on the base to turn the light on. Holding the button
down will increase/decrease the intensity. Press again to turn off.
With optional occupancy sensor, lamp will turn off & restart
automatically.
3. Lamp head and base swivel adjustment:
The head adjusts up-and-down and the base swivel allows
side-to-side movement.
4. Lamp arm adjustment:
The lamp arm adjusts to place light just where it’s needed.
5. USB Charging Option:
The optional USB charging base comes standard with USB-A and USB-C ports to allow for charging of electronic devices. Additionally,
the occupancy sensor and on/off switch are built into the base.
USB-C Charger
USB-A Charger
Occupancy Sensor
On/Off/Dimmer
Switch
On/Off Switch
PIR