ITC T-6229 User manual

T-6229
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
OPERATION MANUAL
MP3 PLAYER
PUBLIC ADDRESS SYSTEM
My friend
005-05:13
POWER
ON
OFF MODE ENTER RETURN INCDEC
IR
MP3 PLAYER
T-6229

TABLE OF CONTENTS
....................................................................1
...................................................................................2
................................................................... 3
4. ...................................................................................
3
5....................................................................................4
6. ( )....................................................5
7. ................................................................. 6.
8. INTERFACEOPERATINGINSTRUCTION.............................................. ...12
9. .............................................. ...... 14
10. .............................................. .................15
11............................................... ........................... 15
12. ...................................................................16
13. ...........................................................................17
14.......................................................................18
1. SAFETY PRECAUTIONS
2. ATTENTION
3. GENERAL DESCRIPTION
FEATURES
FUNCTIONS
FUNCTIONS
INTERNAL PLANAR GRAPH
INSTALLINGSTEP
CONNECTION DIAGRAM
SPECIFICATIONS
INSTALLINGMETHOD
REMOTE CONTROLLER
OPERATINGINSTRUCTION
ADDRESS CODE SWH INSTRUCTION

Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
If you detect smoke or a strange smell coming
from the unit.
If water or any metallic object gets into the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest dealer.
ITC
ITC
1.SAFETY PRECAUTIONS
1

An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.
When Installing the Unit
Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
If dust accumulates on the power supply plug or in
the wall AC outlet, a fire may result. Clean it
periodically. In addition, insert the plug in the wall
outlet securely.
Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.
When the Unit is in Use
Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
Make sure that the volume control is set to
minimum position before power is switched on.
Loud noise produced at high volume when power is
switched on can impair hearing.
Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
Contact your dealer as to the cleaning. If dust
is allowed to accumulate in the unit over a long
period of time, a fire or damage to the unit may
result.
ITC
2.ATTENTION
2

3.GENERAL DESCRIPTION
4. FEATURES
This series of products are MP3 players,Built-in monitor speaker output; the buttons and remote
controller on the panel are convenient and easy to operate, and meets small to medium-sized
public address system and families. Output line 1 can be connected to high-power amplifier and
mixer amplifier. Two storage interfaces in the front and back are convenient for memory card to
access. International standard 1-inch chassis design and simple structure make construction
fast and unified.
1. Control buttons and remote controller on the panel.
3. Chinese and English interface switch function
3. With two (SD) memory interfaces, can freely download MP3 music.
4. Built-in (2W) speaker output, the player can be operated separately.
5. 1 left and right channel audio signal (L / R) output.
6. MP3 music format storage and play can be erased and updated repeatedly.
7. Built-in wideband high-fidelity speaker monitor with full and clear sound.
8. Monitor volume adjusting knob and Adjustable volume.
9. Address DIP switches to set the local address; address confirmation when multiple devices
are used
10. Remote control communication interface (RJ45), can be controlled by the host controller to
achieve a variety of automatic play modes.
Such as: single play, play all, cycle tracks, cycle all, stop play, random play, music play,
music circle.
11. Display of Chinese and English songs.
12. Support UNICODE encoding file sort function of 100 songs, adopt FAT method when play
more than 100 songs.
3

5.FUNCTIONS(Panel)
1. Power LED
2. Power switch
3. Memory interface (SD card)
4. MP3 player screen
5. Infrared Remote Control
Receiving window
6. Monitor speakers output (with power 2W)
7. MP3 player operating mode selection button
8. Play / Pause / confirm button
9. Stop / back button
10. Last
11. Next
4
12345678910 11
POWER
ON
OFF MODE ENTER RETURN INCDEC
IR

5.FUNCTIONS(Rear)
6.FUNCTIONS( )Remote controller
1
2
3
4
5
6
16. Memory interface (SD card)
17. Detection of memory indicator
18. ~ 220-240V 50/60HZ power input
12. Address code settings
13. COM input (RJ45)
14. Monitoring volume adjust
15. Audio signal output
1. Play / Pause / confirm button
2. Stop / back button
3. Last
4. Next
5. Mp3 player operating mode selection button
6. (0~9)Number control
5
12 13 14 15 16 17 18
1234
OPEN ERROR
PLAYING
COM
ADDRESS
TAG
MON VOL
OUTPUT
L L
RR
MIN MAX

COM
ERROR
PLAYING
SD
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUT
LL
RR
7.1
7.2
Power LED
Power Switch
Fig7.1/7.2
7.3
Memory interface( SD card)
Fig7.3
7.OPERATION ILLUSTRATION
2
COM ~220V 50Hz
T1AL250V
ERROR
PLAYING
SD
C
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUT
LL
RR
DC 24V
+ -
16
3
17
When hit the power switch "ON" power up, power indicator light (blue) light.
When hit the power switch "OFF", the power off, power indicator light (blue) does not light.
Attention:
Must ensure all the equipments are on position to operate normally. Or else, the equipment may
get some problem, if that happen, please contact the supplier.
Power on, the display screen will show the auto monitoring status before input SD card. When
the screen shows Welcome to use Public Address System interface, 1 second later it will show
monitoring, please wait interface,"PLAYING" green indicator will light. If it shows Monitoring
Error, the "ERROR" red indicator will light but the"PLAYING"green indicator will not.
Power on and insert the SD card, the screen will show the auto monitoring status. When the
screen shows Welcome to use Public Address System interface, 1 second later it will show
monitoring, please wait interface. The screen show Monitor SD interface and check the SD
Songs Interface, the"PLAYING" green indicator will light on.
Attention:
1. If memory the song not in MP3 format in SD Card, the screen will show File Formats Error
during the automatically monitoring.
2. Have to Insert the SD Card in a correct way, or else it will damage the connector between
the SD Card and memory unit.
3. "ERROP"red indicator light on all the time when insert the SD Card. Check through the
following steps. A. SD Card is loose or not. B. Change SD Card. C. Checking if the units
have problem. Please contact with the supplier.
green4.Insert storage (SD card), "PLAYING" ( ) the indicator without light, "ERROP (red)
the indicator without light, please contact the supplier.
5.Pull out storage (SD card), must be closed power supply of equipment, otherwise will
cause damage to equipment and storage (SD card).
6.In the SD card, all songs can only store in one folder or root directory.
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
Tw-1082
MP3 PLAYER
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
Tw-1082
MP3 PLAYER
6

7
ON
POWER
T-6229
MP3 PLAYER
SD
MODE
MODE ENTER RETURN INCDEC
7.OPERATION ILLUSTRATION
7.4 MODE
Function
Fig7.4
7.5 ENTER
Button Function
Fig7.5
8
ON
POWER
T-6229
MP3 PLAYER
SD
MODE
MODE ENTER RETURN INCDEC
1
"MODE" is used to select the mode. Push the bottom "MODE", do not loose, when power on,
it can be changed into Chinese or English interface. Enter into English interface, can use
"MODE"to choose the operation mode, such as Serial play, play one music, return all, return
one song, random playing, select playing, return select playing. All of these can operate on
the remote controller through MODE.
Attention:
1.Use "MODE" need to use it properly with reasonable pressure to avoid any damage.
2.Need to operate in a near distance when use remote controller.
3.Please change the remote controller or the battery when some of the buttons malfunction
or loose. If the problems still exist, please contact with the supplier.
"ENTER" button has the function of Play/Pause/Confirmation. There are two operation methods:
button on the equipment panel or infrared ray remote control. It will turn to play when pressing ENTER
button, and turn to pause when pressing again. Enter button has confirmation function when it combines with
Mode button.
Attention:
1. While pressing ENTER, the strength should be suitable to avoid damage to the button.
2. When using remote control, the distance should be closed to avoid the remote panel out
of control because of resistance caused by distant range control.
3.When the key-press on the remote control fails or is loosed, pls change the remote control
or the batteries. If the problem still exists, pls contact the manufacturer.
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
7

Fig7.7
RETURN button has the function of pause/return.There are two operation methods: button
on the equipment panel or infrared ray remote control. When playing, press Return, it will turn to
pause; when press RETRUNE in play mode choice, it will turn back.
7.7 DEC
Button Fuction
10
ON
POWER
T-6229
MP3 PLAYER
SD
MODE
MODE ENTER RETURN INCDEC
3
9
ON
POWER
T-6229
MP3 PLAYER
SD
MODE
MODE ENTER RETURN INCDEC
7.OPERATION ILLUSTRATION
7.6 RETURN Button Fuction
Fig7.6
2
Attention:
1. While pressing ENTER, the strength should be suitable to avoid damage to the button.
2. When using remote control, the distance should be closed to avoid the remote panel out
of control because of resistance caused by distant range control.
3.When the key-press on the remote control fails or is loosed, pls change the remote control
or the batteries. If the problem still exists, pls contact the manufacturer.
In playing status, press Button, it could skip to last song. DEC is used as subtraction in
playing status. There are two operation methods: button on the equipment panel or infrared ray
remote control.
Attention:
1. While pressing DEC, the strength should be suitable to avoid damage to the button.
2. When using remote control, the distance should be closed to avoid the remote panel out
of control because of resistance caused by distant range control.
3.When the key-press on the remote control fails or is loosed, pls change the remote control
or the batteries. If the problem still exists, pls contact the manufacturer.
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
8

Fig7.9
COM
is a communication interface, it could be combined with other equipments, at most 8 pieces.
COM (Rj45) network cable made as follows:
Network of one end: 1.brown, 2.white and brown, 3.bule, 4.white and blue,5.orange,6.white and
orange,7.green,8.white and green
Network of the other end: 1.bule, 2.white and blue,3.brown, 4.white and brown, 5.orange,6.white
and orange,7.green,8.white and green.
7.9 COM
Input (RJ45)
11
ON
POWER
T-6229
MP3 PLAYER
SD
MODE
MODE ENTER RETURN INCDEC
7.OPERATION ILLUSTRATION
7.8 INC Button Fuction
Fig7.8
4
COM ~220V 50Hz
T1AL250V
ERROR
PLAYING
SD
C
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUT
LL
RR
DC 24V
+ -
13
COM
ERROR
PLAYING
SD
MONVOL
MIN MAX
ADDRESS
TAG
OUTPUT
LL
RR
123
4
5
6
7
8
next device
Reticle
In playing status, press Button, it could skip to next song. DEC is used as addition in playing
status. There are two operation methods: button on the equipment panel or infrared ray remote
control.
Attention:
1. While pressing INC, the strength should be suitable to avoid damage to the button.
2. When using remote control, the distance should be closed to avoid the remote panel out
of control because of resistance caused by distant range control.
3.When the key-press on the remote control fails or is loosed, pls change the remote control
or the batteries. If the problem still exists, pls contact the manufacturer.
Attention:
1.Check whether there is damage in the net gape or is it normal communication for the
network cable.
2.Keep clean for the net gape, or else it will affect the communication.
3.Pay attention to the steps of making net cable, or else it will make the network cable
unable to communicate normally.
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
COM
ERROR
PLAYING
SD
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUTOUTPUT
LL
RR
~220-240V 50/60Hz
~220-240V50/60Hz
9

Fig7.9.2
7.9.2 OUTPUT
Audio Signal OUTPUT
7.OPERATION ILLUSTRATION
7.9.1
Monitor VolumeAdjustment
Fig7.9.1
COM ~220V 50Hz
T1AL250V
ERROR
PLAYING
SD
C
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUT
LL
RR
DC 24V
+ -
COM ~220V 50Hz
T1AL250V
ERROR
PLAYING
SD
C
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUT
LL
RR
DC 24V
+ -
15
14
MON VOL
MIN MAX
MON VOL
MIN MAX
MIN MAX
MIXER AMPLIFIER
ON
OFF
POWER
5
0
1
2
3
4 6
7
8
9
10
5
0
1
2
3
4 6
7
8
9
10
5
0
1
2
3
4 6
7
8
9
10
5
0
1
2
3
4 6
7
8
9
10
5
0
1
2
3
4 6
7
8
9
10
0
-5
-4
-3
-2
-1 +1
+2
+3
+4
+5
0
-5
-4
-3
-2
-1 +1
+2
+3
+4
+5 MIC1
TREBLE MIC1 MIC2 MIC3 AUX1 AUX 2BASS
TEMP
SPEAKERZONES
12
246810
1
PROT
2345
LEVEL
AMPLIFIER
:
the monitor volume should be adjusted to the appropriate responsibility, to avoid causing
aeration due to oversize or downsize responsibility.
Attention
When the audio signal output to the amplifier, the volume can be adjusted and controlled by amplifier
corresponding equipment volume knob, combined with BASS and TREBLE adjust volume knob
obtained from the ideal sound effects.
Attention:
1.the audio signal output, must adjust volume to intermediate position to avoid sending
aeration.
2. at the same time, avoid audio output to multiple devices then to amplifier, otherwise it
will generate noise.
COM
~220-240V 50/60Hz
~220-240V 50/60Hz
ERROR
PLAYING
SD
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUTOUTPUT
LL
RR
COM
ERROR
PLAYING
SD
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUTOUTPUT
LL
RR
10

Fig7.9.3
Power is to provide energy for equipment, must be used of power supply safely. Don't use it, please
pull power
7.9.3 ~ 220-240V 50/60HZ Ac Power Input
7.OPERATION ILLUSTRATION
COM ~220V 50Hz
T1AL250V
ERROR
PLAYING
SD
C
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUT
LL
RR
DC 24V
+ -
19
.
:
while use, must be used within the specified range security power input, avoid causing accidents
Attention
COM ~220-240V 50/60Hz
T1AL 250V
ERROR
PLAYING
SD
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUTOUTPUT
LL
RR
11

8.INTERFACEOPERATION INTRODUCTIONS
8.1
Continuous Play
8.2 Play One
Sequence 001-01:30
only love.MP3
Broadcasting order: which song is playing now
play time (minute:second)
Name of song Song format
Sequence
No.< >
Mode:Continuous Play
___
Choose from which song began to play
After/before choosing songs
Play one 001-01:30
only love.MP3
Broadcasting order: which song is playing now
Play one
No.< >
___
8.3
Play All
Repeat _a 001-01:30
only love.MP3
Repeat all
No.< >
___
When used SD card for broadcasting, inserted stored MP3 format songs SD card into SD card board
(insert the front SD plate or back panel, choose one).
Operating play modes (MODE), and choose a pattern continuous play, with the operating DEC (+)
and INC (-), also press directly on the remote keys to choose the one which wants to play, press the
ENTER key, machine start from selected songs and played until last song, while machine stop
playing songs, return to the total menu interface.
Mode:Continuous Play
Operating play modes (MODE), and choose play single MODE, with the operating DEC (+) and INC (-),
also press directly on the remote keys to choose the one which wants to play, press the ENTER key,
machine start from selected songs and played until last song, while machine stop playing songs, return
to the total menu interface.Broadcasting order: which song is playing now
Operating play modes (MODE), and choose play all MODE, with the operating DEC (+) and INC (-) to
select the first song or any one in the SD card to begin play all, after the selection, press the ENTER
key, machine will be play all from the choose song (note: choose play all mode from network, it
should be play from the first song.
Mode:play one Mode:play one play time (minute:second)
Choose from which song began to play
After/before choosing songs
Name of song Song format
Mode:Repeat all Mode:Repeat all
Broadcasting order: which song is playing now
play time (minute:second)
Name of song Song format
Choose from which song began to play
After/before choosing songs
12

Program 001-01:30
only love.MP3
Program play
No.01 Choose < >
8.5
Random Play
Repeat_s 001-01:30
only love.MP3
Repeat single
No.< >
___
Radom 001-01:30
only love.MP3
Radom play
8.6
Sorting Play
8.INTERFACEOPERATION INTRODUCTIONS
8.4 Repeat Play One
___
Operating play modes (MODE), and choose repeat play one MODE, with the operating DEC (+)
and INC (-), also press directly on the remote keys to choose the one which wants to repeat play,
press the ENTER key, machine start to repeat play selected songs.
Operating play modes (MODE), and choose the random play MODE, press the ENTER key, the machine
will play the songs in SD card at will.
Note: random play modes will not automatically STOP, press the STOP button manually, so machine
STOP play songs.
Sorting play also called programming play, which re-programs songs through the internal CPU. Press
"MODE" button, choose Sorting play mode, and then press "DEC" or "INC" to select songs. After
choosing the songs, press "ENTER" button to confirm, the Surface will automatically jump to the next
song for programming. If you want to continue to program, press, "DEC" or "INC" select songs, if you
do not want to program, then click "ENTER" key to play the selected songs. Up to 20 songs are
programmable in the sorting play mode. When program to the 20th songs, and then "ENTER" key, it
will not jump to 21, but directly to play the selected songs. When all the programmed songs are play
out, it stops playing.
Mode:Repeat single Mode:Repeat single
Choose from which song began to play
After/before choosing songs
Name of song Song format
Broadcasting order: which song is playing now
play time (minute:second)
Mode:Radom play Mode:Radom play
Name of song Song format
Broadcasting order: which song is playing now
play time (minute:second)
Mode:Program play Mode:Program play
Name of song Song format
Broadcasting order: which song is playing now
play time (minute:second)
13

Program_r 001-01:30
Only one.MP3
Program repeat
8.INTERFACEOPERATION INTRODUCTIONS
8.7
Cycle Play
9.ADDRESS CODE SWITCH INSTRUCTION
1
2
3
4
1
DIP
1
DIP
1
DIP
234
ON
234
ON
234
ONON
ADDRESS CODE
1
DIP
234
ON
1
DIP
1
DIP
234
ON
234
ON
1
DIP
1
DIP
234
ON
234
ON
5
6
7
8
Note:
8.8
Digital play
ADDRESS CODEILLUSTRATION ILLUSTRATION
Cycle play re-programs songs through the internal CPU. Press "MODE" button, choose Cycle play
mode, and then press "DEC" or "INC" to select songs. After choosing the songs, press "ENTER"
button to confirm, the Surface will automatically jump to the next song for programming. If you want
to continue to program, press, "DEC" or "INC" select songs, if you do not want to program, then click
"ENTER" key to play the selected songs. Up to 20 songs are programmable in the Cycle play mode.
When program to the 20th songs, and then "ENTER" key, it will not jump to 21, but directly to play
the selected songs. When all the programmed songs are play out, it jumps to play the first selected
song.
Press the keys directly on the remote controller, after 3 seconds it operates; or press the number keys
and press key to play.
Note:
1. when a play mode is in progress, minimize the times of stopping or switching modes, so as to
avoid damage of the equipment and memory card.
2. To carry out a play mode, use the monitor speakers and professional speakers, the volume
must be reasonable adjusted.
3. The player adopts remote controller, if the remote controller is malfunctioning or slack, replace
the remote controller or the battery. If the problem still persists, please contact the suppliers.
1. The first three address codes switch on the back panel mean the number of
the equipments (for example: the first three switches to the ON-side means
that the machine is the first one).
2. The fourth switch operates automatically or manually (for example, the
fourth switch to the ON side, means the machine will automatically boot
to play songs).
3. Network port compatible to host communication, which must be realized
by matching the address code.
No.01 Choose < >
___
Choose from which song began to play
After/before choosing songs
Broadcasting order: which song is playing now
play time (minute:second)
Mode:Program repeat Mode:Program repeat
Name of songSong format
14

10. INTERNAL PLANAR GRAPH
Audio PCB Board
Power input
Panel
Mp3 screen
Speaker
Operating keys
Memory interface (SDcard)
11. INSTALLING STEP
1
4
Note
2
3
Transformer
Power swtich
Memory interface
(SD card)
1. Firstly, install board inside the machine with wiring.
2. After install the back panel and floor with screws.
3. Then install equipment panel.
4. Finally, to install cover.
1.the equipment adopts 4X4mm screws.
2 when installation, keep equipment clean.
3. Undertake certain temperature conditions, installing equipment.
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
15

12.CONNECTION DIAGRAM
COM 4-16 70V 100V
OUTPUT
CH 5 CH 4 CH 3 CH 2 CH 1
COM 100VCOM 100VCOM 100VCOM 100VCOM 100V
~220-240V 50/60Hz
T2AL250V
AUX2 OUT
AUX1
MIC2 MIC3
MUTE EMC INPUT
MIC2 MIC3
LINE INPUT
Mp3 PLAYER
MIXER AMPLIFIER
COM ~220-240V 50/60Hz
T1AL 250V
ERROR PLAYING
SD
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUT
LL
RR
CONNECT TO THE LAST UNIT(MP3 PLAYER)
RISQUE DE CHOC ELECTRICUS
-NE PAS QUVRIR
SERIAL NO:
PUBLIC ADDRESS SYSTEM
AVIS:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
16

DIMENSION(mm)
NET WEIGHT 2.7Kg
442X215X48
MODEL
SIGNAL OUTPUTRANGE
OUTPUT
COMMUNICATION PROTOCOL
In suspended state:0.15 0.1mV
COMMUNICATION INTERFACE
T-6229
MONITOR OUTPUT
20Hz~20KHz(+1dB)
~220-240V 50/60Hz
13.SPECIFICATIONS
COMMUNICATION RATE
POWER INPUT
4800BPS
RS422
300mV sinusoidal inputsignal to reachthe largest
volume, overload in 8 ,Non-distortion output: 1.85 0.1V
990 Hz sine wave input signal - 128kbps - 44.1KHz - 2.00Vpp
Signal: 1.5 0.1V
17

14.INSTALLING METHOD
2cm
2cm
2cm
Unit:mm
3
44
44
215
200
44
48
436
442
Unit:mm
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
COM
ERROR
PLAYING
SD
MON VOL
MIN MAX
ADDRESS
TAG
OUTPUT
LL
RR
POWER
SD
MODE ENTER RETURN INCDEC
ON
OFF
IR
18